• No results found

high temperature thermal annealing

XRD and AFM of recrystallization a-Ge and a-
Ge:In with High Annealing Temperature

XRD and AFM of recrystallization a-Ge and a- Ge:In with High Annealing Temperature

... by thermal evaporation technique on glass substrate at room temperature in vacuum system supplied by Balzers model [BAE ...substrate temperature and rat of deposition); the main parameter that ...

5

Densification of Thin Aluminum Oxide Films by Thermal Treatments

Densification of Thin Aluminum Oxide Films by Thermal Treatments

... The thermal stability on silicon is a major advantage of aluminum oxide compared to other potential alternative dielectric ...deposition annealing. Combination of aluminum oxide with other high-k ...

12

Considerable Enhancement of Field Emission of SnO2Nanowires by Post Annealing Process in Oxygen at High Temperature

Considerable Enhancement of Field Emission of SnO2Nanowires by Post Annealing Process in Oxygen at High Temperature

... a high potential barrier on the nanowires surface to reduce the ...conductivity. Thermal annealing with high temperature in oxygen could not only promote the crystalline quality of ...

6

Temperature Evaluation of Core Components of the HTGR at Depressurization Accident Considering Annealing Recovery on Thermal Conductivity of Graphite

Temperature Evaluation of Core Components of the HTGR at Depressurization Accident Considering Annealing Recovery on Thermal Conductivity of Graphite

... obtain high-temperature coolant helium gas, graphite materials are used for structural components in the core because of their excellent thermo/mechanical ...their thermal conductivity is reduced by ...

7

Controlling Growth High Uniformity Indium Selenide (In2Se3) Nanowires via the Rapid Thermal Annealing Process at Low Temperature

Controlling Growth High Uniformity Indium Selenide (In2Se3) Nanowires via the Rapid Thermal Annealing Process at Low Temperature

... improved by RTA treatment to reduce the size and dis- tribution of Au nanoparticles. The in situ annealing TEM is used to study the effect of heating rate on Au film transfer to Au nanoparticle. The lower ...

6

Effects of Post Annealing Treatments on the Interfacial Chemical Properties and Band Alignment of AlN/Si Structure Prepared by Atomic Layer Deposition

Effects of Post Annealing Treatments on the Interfacial Chemical Properties and Band Alignment of AlN/Si Structure Prepared by Atomic Layer Deposition

... subsequent high temperature thermal treatments ...the annealing temperature dependence on the interfacial chemical prop- erties and band alignment of the ALD-AlN/Si structure has not ...

9

Analysis of Thermal Conductivity of Irradiated UO2 Fuel

Analysis of Thermal Conductivity of Irradiated UO2 Fuel

... the thermal conductivity measurements performed in the ITU were presented by the CRIEPI High Burn-up Rim Project ...(‘before annealing’ data set) and 8 measurement sessions performed at decreasing ...

8

Selecting Annealing Temperature of P3HT/PCBM Incorporated with Nano-diamonds Using Thermal Desorption Spectroscopy

Selecting Annealing Temperature of P3HT/PCBM Incorporated with Nano-diamonds Using Thermal Desorption Spectroscopy

... Thermal annealing can provide positive effects on photovoltaic process of P3HT/PCBM based ...However, thermal annealing can also bring negative effects on photovoltaic process of P3HT/PCBM ...

11

THE EFFECT OF THE POST-ANNEALING TEMPERATURE ON THE NANOSTRUCTURE OF SNO 2SYNTHESIZED BY THERMAL EVAPORATION METHOD L.S. Chuah

THE EFFECT OF THE POST-ANNEALING TEMPERATURE ON THE NANOSTRUCTURE OF SNO 2SYNTHESIZED BY THERMAL EVAPORATION METHOD L.S. Chuah

... microstructures. Figure 1 indicates the presence of Sn and O in the nanostructures. No other metal elements are aiding in catalyzing the observed structures growth. The peak intensity corresponds to the concentration of ...

6

Quantum Dot Interdiffusion For Two Colour Quantum Dot Infrared Photodetectors

Quantum Dot Interdiffusion For Two Colour Quantum Dot Infrared Photodetectors

... for annealing tem- peratures above 650 ◦ ...an annealing temperature of 800 ◦ C, however with a large amount of spectral ...broadening. Thermal interdiffusion in the quan- tum dot structures ...

70

Preparation of Manganese Sulfide Thin Film by Thermal Evaporation
Technique Deposition: Application of the Experimental Design Photodiode

Preparation of Manganese Sulfide Thin Film by Thermal Evaporation Technique Deposition: Application of the Experimental Design Photodiode

... low temperature growing techniques it crystallizes into the zinc blende (βMnS) or wurtzite (γMnS) structure (Clendenen and Drickamer, 2006; Kobayashi et ...

6

Protective Clothing Based on High-temperature Thermal Radiation

Protective Clothing Based on High-temperature Thermal Radiation

... body thermal radiation thermal modeling, will take the initiative to vasodilation and vasoconstriction, trembling and sweating control coefficient can't reflect the individual difference, so in the future ...

7

The ion implantation induced properties of one dimensional nanomaterials

The ion implantation induced properties of one dimensional nanomaterials

... With the advent of modern times, higher performance devices are desired. In order to get more high-performance devices, the pivotal problem is how to get better quality materials. Generally, we dope some ...

13

Effect of the annealing temperature on phase composition of iron oxide nanoparticles

Effect of the annealing temperature on phase composition of iron oxide nanoparticles

... The magnetic properties of nanomaterials depend on their crystal structure and average particle size. Hence, in order to investigate the effect of the iron oxide distribution on the magnetic behavior of the ferrite ...

8

THE EFFECT OF ANNEALING TEMPERATURE ON THE OPTICAL AND MECHANICAL PROPERTIES OF INTERMETALLIC NiTi THIN FILMS USING DC MAGNETRON SPUTTERING TECHNIQUE

THE EFFECT OF ANNEALING TEMPERATURE ON THE OPTICAL AND MECHANICAL PROPERTIES OF INTERMETALLIC NiTi THIN FILMS USING DC MAGNETRON SPUTTERING TECHNIQUE

... a temperature range of 350 ºC-650 ...a temperature range of 350 ºC-550 ºC show delamination (failure event) but in the case of higher temperature, ...

12

Rapid, Brushless Self assembly of a PS b PDMS Block Copolymer for Nanolithography

Rapid, Brushless Self assembly of a PS b PDMS Block Copolymer for Nanolithography

... Fig. S2 shows top-down SEM images of PS-b-PDMS fi lms (after the usual plasma etch) spin-coated at various spin speeds and times, and annealed at the optimum time and temperature de fi ned above. The fi lm ...

5

Nano-mechanical Behaviour and Microstructural Evolution of Cu/Si Thin Films at Different Annealing Temperatures

Nano-mechanical Behaviour and Microstructural Evolution of Cu/Si Thin Films at Different Annealing Temperatures

... a temperature of 160℃ for 2 min in ...following annealing process, the microstructure of the indentation affected zone is still composed entirely of amorphous phase (see also the high-resolution TEM ...

9

Studies on ageing performance of some novel polyurethanes

Studies on ageing performance of some novel polyurethanes

... There is no weight loss in any of the newly synthesized rigid polyurethanes. However, a small weight loss was observed in the case of all the tough polyurethanes in all the three media. This is attributed to the presence ...

15

Dependence of Atomic Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High Temperature Ar Annealing

Dependence of Atomic Scale Si(110) Surface Roughness on Hydrogen Introduction Temperature after High Temperature Ar Annealing

... contrast, high-temperature annealing provides atomically smooth surfaces on both Si(100) and ...Furthermore, high-temperature annealing in a furnace is a useful industrial ...

9

Structural and Optical Properties Evolution of Au/SiO2 Nanocomposite Films: The Influence of Substrate Temperature and Thermal Annealing

Structural and Optical Properties Evolution of Au/SiO2 Nanocomposite Films: The Influence of Substrate Temperature and Thermal Annealing

... room temperature, formation of small gold nanoclusters with size below 2 nm inside the silica matrix was confirmed by XRD and optical absorption ...After annealing, the size of AuNPs is slightly larger than ...

15

Show all 10000 documents...

Related subjects