• No results found

Measurements used in this study

Abstract: Measurements of optical properties have been used for decades to study particle

Abstract: Measurements of optical properties have been used for decades to study particle

... Abstract: Measurements of optical properties have been used for decades to study particle distributions in the ...provide measurements that are biased, as certain particles (based on size, ...

18

Measurements of the acid-binding capacity of ingredients used in pig diets

Measurements of the acid-binding capacity of ingredients used in pig diets

... present study, a range of ingredients that are commonly used in pig diets was ...be used to formulate a starter diet in such a way that gastric acidity would be ...

6

measurements to assess the quality of the engineered product or the process used to build

measurements to assess the quality of the engineered product or the process used to build

... empirical study concerning chosen metrics and subset of these measures that provide sufficient information is given and metrics providing overlapping information are excluded from the ...

25

Measurements and Simulations of Surface Dielectric Barrier Discharges Used as Plasma Actuators

Measurements and Simulations of Surface Dielectric Barrier Discharges Used as Plasma Actuators

... In general, double-barrier actuators require larger applied voltages to generate plasma and induce smaller forces than single-barrier actuators [94]. We include them in this study for a variety of reasons. The ...

208

MEASUREMENTS OF NATURAL RADIOACTIVITY IN SOME KINDS OF MARBLE AND GRANITE USED IN RIYADH REGION

MEASUREMENTS OF NATURAL RADIOACTIVITY IN SOME KINDS OF MARBLE AND GRANITE USED IN RIYADH REGION

... estimated and compared with the recommended limits from UNSCEAR data. Additionally, the correlations between thorium, uranium and potassium will be shown in this paper with an aim to correlate the petrographic ...

12

Motivations and measurements in an agile case study

Motivations and measurements in an agile case study

... The survey responses also indicated that the team paired approximately 60% of the time. Questionnaire respondents noted that the team used “intelligent pairing,” wherein they only paired on those problems ...

10

Exploratory Study. Accounting for Uncertainty in Lumen Measurements

Exploratory Study. Accounting for Uncertainty in Lumen Measurements

... Again, the total spectral flux reference lamp is to be operated at a fixed current to provide this spectral output. For goniometer measurements, lamp luminous intensity standards calibrated in candelas can be ...

35

CLOUD is a metaphor used for the internet and. Network-based Measurements on Cloud Computing Services. Yin Zhang

CLOUD is a metaphor used for the internet and. Network-based Measurements on Cloud Computing Services. Yin Zhang

... This study aims at ad- dressing some of these doubts by introducing a measurement test for the network performance of these services, and comparing them with the per- formance offered by traditional web-hosting ...

7

Reliability of movement workspace measurements in a passive arm orthosis used in spinal cord injury rehabilitation

Reliability of movement workspace measurements in a passive arm orthosis used in spinal cord injury rehabilitation

... In patients with cervical spinal cord injuries major phys- ical changes have been reported to occur during rehabili- tation [19] such as improvements in the seating conditions (from electric and reclining wheelchairs to ...

8

Category 8 Cable Transmission Measurements Comparative Study between 4-port single wire measurements and 2-port balun measurements

Category 8 Cable Transmission Measurements Comparative Study between 4-port single wire measurements and 2-port balun measurements

... Previous to Category 8 baluns were the main component used to interface the balanced twisted pairs to the unbalance output ports of the VNAs. Testing with baluns has been extensively described in the twisted pair ...

6

Attenuation Measurements of Materials Used in Construction of Buildings

Attenuation Measurements of Materials Used in Construction of Buildings

... materials used for building structures it is necessary to perform ana- lytical calculations of electric field attenuation or make a direct measurement on a natural sample of a particular ...laboratory ...

5

Neutron Activation Measurements for Materials used in Fusion Reactors.

Neutron Activation Measurements for Materials used in Fusion Reactors.

... cross-section measurements were larger than published values ...cross-section measurements are proportional to the number of counts detected so background suppression is an approach to increase the ...

64

(0,2) ions from spectrographic measurements used to infer the energy of precipitation in different auroral forms and compared with radar measurements

(0,2) ions from spectrographic measurements used to infer the energy of precipitation in different auroral forms and compared with radar measurements

... Higher time resolution using a new detector will be used in future. The spread in fitted temperatures between 500–900 K cor- responds to a height range of approximately 120–170 km when compared with the MSIS ...

14

Study of Instrumentation for Direct Torque Measurements

Study of Instrumentation for Direct Torque Measurements

... The first step is to make a stress analysis of the rudder tiller in order to determine whether a torque determination is possible by measuring the stresses in th[r] ...

10

A Study for Detection of Drift in Sensor Measurements

A Study for Detection of Drift in Sensor Measurements

... the measurements to transform them into signals sensitive to a specific event of the four di ff erent causes described above, called ...The study needs to integrate the FDI algorithms and the change ...

176

Correlations between acoustic and electrochemical measurements for metallic corrosion on steel strings used in guitars

Correlations between acoustic and electrochemical measurements for metallic corrosion on steel strings used in guitars

... pressure measurements were taken in a semi anechoic environment, using a ...were used. Sound pressure measurements were processed to determine their frequency content by FFT (Fast Fourier Transform), ...

36

Conductivity measurements are used for applications such as in the production of ultrapure water or determining the salinity of sea water.

Conductivity measurements are used for applications such as in the production of ultrapure water or determining the salinity of sea water.

... Conductivity is measured by making a measurement of the electrical resistance. The simplest kind of measuring cell used consists of two similar electrodes. An alternating voltage applied to one of the electrodes ...

12

Gamma radiation measurements and dose rates. in commercially-used natural tiling rocks (granites)

Gamma radiation measurements and dose rates. in commercially-used natural tiling rocks (granites)

... In order to calculate the exposure rates 1 m above ground level for distributed sources of gamma emitters in soil, conversion factors (absorbed dose rate in air per unit activity per unit of soil mass, nGy h −1 per Bq kg ...

20

A Study on Antennas Used in Mobile Device

A Study on Antennas Used in Mobile Device

... Fig. 1. Geometry of the proposed folded dual-loop antenna. To meet the multiband demands of GSM/DCS/PCS/UMTSsystems, multiple resonance paths are required in our antennadesign. Hence, two loops of the antenna need to be ...

6

Urodynamic study (UDS) is used to determine the

Urodynamic study (UDS) is used to determine the

... Results: 3,161 of 4,470 women recruited were eligible for the analyses. The distribu- tion of urodynamic prevalence in 3,161 women revealed that urodynamic stress incontinence (USI) was 1,755/3,161 (55.5%), detrusor ...

7

Show all 10000 documents...

Related subjects