Residual Strength
Residual Strength of Franciscan-Derived Clay
... the residual strength of slip zone soils and compared the results between the ...testing strength hold similar peak strength to the laboratory ...
189
Residual strength of corroded reinforced concrete beams
... of strength resulting from corrosion to the main and shear ...the residual flexural strength of reinforced concrete beams where different diameters of main (high yield) reinforcement were subjected ...
335
Multiple Regression Analysis for Residual Strength of Concrete at Elevated Temperature
... physical strength of the ...of residual strength is developed. The model gives residual compressive strength of cement concrete for temperature range of 22 o c to 800 0 c and heating ...
5
The effect of bond stress on residual strength of cracked RC beams
... the residual strength of the member is computed corresponding to unstable ...predict residual life due to the presence of bond-slip assuming that the crack opening is only due to ...significant ...
8
Residual Strength Characteristics of Polymer Fibre Concrete Exposed to Elevated Temperature
... of strength occurred over time when exposed to high temperature in the case of high strength ...[7–9]. Residual strength degradation in terms of compressive and flexural properties was ...
16
Residual Strength of Corroded Reinforced Concrete Beams Using an Adaptive Model Based on ANN
... the residual strength of corroded reinforced concrete beams has been studied from experimental and theoretical ...the residual flexural strength of corroded RC beams using the same data from ...
14
Residual Strength of Reworked Steel Reinforcement Bars
... and straightening as is the case in this study, would bring about the need to increase the area of steel provided for the design to suffice. Current practise such as the Ministry of Works specification [9] requires that ...
11
ANALYTICAL DETERMINATION OF RESIDUAL STRENGTH AND LINKUP STRENGTH FOR CURVED PANELS, WITH MULTIPLE SITE DAMAGE
... Multi-site damage is observed in all aging aircraft due to wide spread fatigue damage. The multi-site cracks may appear to be individually safe, but they can merge to become cracks of larger size leading to catastrophic ...
12
Liquefied Residual Strength of Undrained Sand upon A Parametric Approach to Hypo-elastic Model
... of strength and cause the soil to flow in a manner resembling a liquid known as liquefaction of ...shear strength by increasing the effective mean ...
12
A Study on Impact of Cooling Regimes on Residual Strength of Self-Compacting Concrete at Elevated Temperatures
... Gomes P. C.C.et al [3] suggested a stage-wise optimized method for obtaining SCC. The method recommends maximum size aggregate as 12mm, water – cement ratio of 0.4 and silica fume-cement ratio of 0.1. It is suggested ...
7
Effect of residual strength parameters on FRC flexural creep: multivariate analysis
... This paper reports the multivariate analysis of experimental results from more than one hundred FRC prismatic specimens tested under sustained flexural loads for at least 90 days, collected from previously published ...
11
Analytical Model for Residual Bond Strength of Corroded Reinforcement in Concrete Structures
... bond strength and its components, contributed by adhesion, confinement and corrosion pressure, as a function of corrosion ...bond strength matches well with the experimental results without stirrups by ...
38
Strength and porosity of concrete incorporating polypropylene and steel fibre subjected to high temperature
... relative residual compressive strength showed respectively a decrease of 56%, 65% and 35% for C2, CP2-2 and CS2-30 concretes while the porosity increase was respectively 5%, 7% and ...slight strength ...
10
Residual shear strength of clay-structure interfaces
... in strength post-peak is found to occur quicker with the glass interface than with the rock ...in strength with the glass interface can be explained by the smoothness of the surface parallel to the plane ...
10
AN EXPERIMENTAL INVESTIGATION ON BEHAVIOUR OF GEOPOLYMER CONCRETE WITH FERRO CEMENT
... impact residual strength ratio of geopolymer ferrocement by 4-28 that of the reference plain ferrocement mortar ...absorbed, residual impact strength ratio (I-rs), It was concluded that the ...
12
Determination Of Liquefaction Potential By Sub-Surface Exploration Using Standard Penetration Test
... low residual strength (strength of liquefied ...shear strength of liquefied ...the strength of the soil susceptible to flow liquefaction is no longer sufficient to withstand the static ...
10
Compressive Behaviour of Polyester Fiber Reinforced Concrete Subjected To Sustained Elevated Temperature
... To enhance fire resistance, polyester fibers have been proposed since at elevated temperatures, melting of polyester fibers creates additional channels that allow a release of the water vapour pressure generated within ...
5
Residual Compressive Strength of Recycled Brick Aggregate Concrete at High Temperatures
... compressive strength was observed between 200 and 300 o C in both the ...temperature strength. Beyond 300 o C a gradual decrease in residual compressive strength was ...more residual ...
6
Fast shearing of cohesive soils using ring shear apparatus
... steady residual strength was obtained at a rate of 15 mm/min then the sample was vibrated for 5 minutes as the shearing ...steady residual value was ...the strength of the soil, depending on ...
520
Coconut Fibre Effect on Fresh and Thermo Gravimetric Properties to Mitigate Spalling of Self Compacting Concrete at Elevated Temperatures
... Joseph Khedari et al. [2] investigated the use of a new lightweight construction material, composed of cement, sand and fibre from the waste of young coconut (Cocosnucifera) and durian (Duriozibethinus). Thermal conduc- ...
11