• No results found

Resorcinol-formaldehyde (RF)

Parametric study of factors affecting melamine-resorcinol-formaldehyde xerogels properties

Parametric study of factors affecting melamine-resorcinol-formaldehyde xerogels properties

... the resorcinol (R) typically used, and resulting in a melamine-resorcinol- formaldehyde (MRF) gel; synthesis was facilitated by a sodium carbonate catalyst (C), as often used in RF gel ...

20

The control of porosity at nano scale in resorcinol formaldehyde carbon aerogels

The control of porosity at nano scale in resorcinol formaldehyde carbon aerogels

... Resorcinol formaldehyde (RF) aerogels are special type of highly cross-linked aromatic polymers with a high pore volume (0.25–1.25 cm 3 /g) [11], low density (0.06– 0.103 g/cm 3 ) [12], large specific ...

9

The impact of deuterium oxide on the properties of resorcinol-formaldehyde gels

The impact of deuterium oxide on the properties of resorcinol-formaldehyde gels

... of formaldehyde to resorcinol. In a basic solution, resorcinol forms an anion with the negative charge con- centrated at the ortho and para positions of the benzene ...with formaldehyde. How- ...

8

Process variable optimization in the manufacture of resorcinol–formaldehyde gel materials

Process variable optimization in the manufacture of resorcinol–formaldehyde gel materials

... all resorcinolformaldehyde (RF) gel samples were prepared using an analogous procedure, excepting for the specific parameter investigated in each section of the ...of resorcinol (Sigma Aldrich, ...

14

Bondability of tropical fast-growing tree species III: curing behavior of resorcinol formaldehyde resin adhesive at room temperature and effects of extractives of Acacia mangium wood on bonding

Bondability of tropical fast-growing tree species III: curing behavior of resorcinol formaldehyde resin adhesive at room temperature and effects of extractives of Acacia mangium wood on bonding

... indicated that the bonding performance of Acacia mangium laminates that bonded with resorcinol formaldehyde (RF) resin adhesive at room temperature [20°C and 65% relative humidity (RH)] was distributed in ...

6

Studies on Composites of Resorcinol- Formaldehyde resin blended with Sulphonated Cardiosprmum halicababum T. Subha Devi 1, M. Karpagavalli2 , R. K. Seenivasan 3*

Studies on Composites of Resorcinol- Formaldehyde resin blended with Sulphonated Cardiosprmum halicababum T. Subha Devi 1, M. Karpagavalli2 , R. K. Seenivasan 3*

... Pure resorcinolformaldehyde resin (RFR) was prepared according to the literature method [3, 6 – 8]. It was then ground, washed with distilled water and finally with double distilled (DD) water to remove ...

9

Macro mesoporous resorcinol formaldehyde polymer resins as amorphous metal free visible light photocatalysts

Macro mesoporous resorcinol formaldehyde polymer resins as amorphous metal free visible light photocatalysts

... of resorcinol was dissolved in distilled water at room temperature, and a certain amount of sodium carbonate was added as the ...all resorcinol was dissolved and the solution became transparent ...Then ...

14

Studies on Composites of Resorcinol-Formaldehyde resin blended with Sulphonated Aegle marmelos(L) Correa

Studies on Composites of Resorcinol-Formaldehyde resin blended with Sulphonated Aegle marmelos(L) Correa

... The FT-IR spectral data of pure resin (RFR), 30% (w/w) composite and pure sulphonated Aegle Marmelos charcoal (SAMC) were recorded with a JASCO FT-IR 460 plus FT-IR spectrometer by using KBr pellets. To establish the ...

14

Gelation mechanism of resorcinol-formaldehyde gels investigated by dynamic light scattering

Gelation mechanism of resorcinol-formaldehyde gels investigated by dynamic light scattering

... structure, which in turn requires improved understanding of the chemistry and physics of growth, aggregation and gelation processes governing nanostructure formation in these materials. We used time-resolved dynamic ...

39

Analysis of phenol-resorcinol-formaldehyde resins

Analysis of phenol-resorcinol-formaldehyde resins

... It is possible to determine the P/R molar ratios and number- averaged molecular weights of PRF resins from the absorp- tion intensities of various protons of acetylated PRF resins.. Fi[r] ...

6

Effects of secondary metal carbonate addition on the porous character of resorcinol-formaldehyde xerogels

Effects of secondary metal carbonate addition on the porous character of resorcinol-formaldehyde xerogels

... It is well 376 established that an increase in catalyst concentration will cause a decrease in average pore 377 size, which supports the results presented here and indicating other facto[r] ...

35

Structural and Antibacterial study of Resin II Derived from p Nitrophenol, Resorcinol and Formaldehyde

Structural and Antibacterial study of Resin II Derived from p Nitrophenol, Resorcinol and Formaldehyde

... A mixture of p-nitrophenol (0.2M), resorcinol (0.1M) and formaldehyde (0.4M) was refluxed in presence of 1M HCl (150ml) in oil bath at 120-125 0 C for six hours with intermittent shaking. The resinous ...

6

Semiconducting behavior and antibacterial activity of some resins derived from p Nitrophenol, Resorcinol and Formaldehyde

Semiconducting behavior and antibacterial activity of some resins derived from p Nitrophenol, Resorcinol and Formaldehyde

... researchers were synthesized and characterized the formaldehyde based terpolymeric resins using various functional phenols as one of the monomer [3-7]. Synthesis and characterization with good antimicrobial ...

11

Commentary: mechanistic considerations for associations between formaldehyde exposure and nasopharyngeal carcinoma

Commentary: mechanistic considerations for associations between formaldehyde exposure and nasopharyngeal carcinoma

... to formaldehyde might per- turb nitrosothiol homeostasis and potentiate EBV reactivation - thereby increasing the chance of basal epi- thelial cell ...by formaldehyde exposure; such changes might arise from ...

6

Discussion on Production Technology of Formaldehyde Purification and Anti-cracking Ecological Board and the Intuitive Display Experiment

Discussion on Production Technology of Formaldehyde Purification and Anti-cracking Ecological Board and the Intuitive Display Experiment

... of formaldehyde purification and anti-cracking eco-board are chitin and nano-silicon, ...adsorb formaldehyde and other gas molecules in the air to the surface of the ...

5

Photocatalytic of TiO2 SiO2 Thin Films Co Doped with Fe3+ and Thio Urea in the Degradation of Formaldehyde by Indoor and Outdoor Visible Lights

Photocatalytic of TiO2 SiO2 Thin Films Co Doped with Fe3+ and Thio Urea in the Degradation of Formaldehyde by Indoor and Outdoor Visible Lights

... of formaldehyde of 1000, 3000 and 5000 ppmV, the efficiencies of formaldehyde degradation were ...same formaldehyde initial concentra- tions, the photocatalytic activities were ...

5

Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures

Synthesis of modified phenolic resins using renewable materials for advanced composites in civil engineering structures

... The reactive methylol groups in the resols molecules condense when heated, forming a fused-larger molecule or crosslinked resin (Painter and Coleman 2000, p.1). The prepolymers are heated to promote crosslinking of the ...

138

Formaldehyde Exposure, Health Symptoms and Risk Assessment among Hospital Workers in Malaysia

Formaldehyde Exposure, Health Symptoms and Risk Assessment among Hospital Workers in Malaysia

... of formaldehyde during the gross-cutting ...to formaldehyde for a person who is performing dissection may be 2 to 3 times greater than the mean ambient formaldehyde ...the formaldehyde-soaked ...

19

Formaldehyde 2,4 di­nitro­phenyl­hydrazone

Formaldehyde 2,4 di­nitro­phenyl­hydrazone

... 2,4-Dinitrophenylhydrazone derivatives are widely used in various forms of analytical chemistry (Lamberton et al., 1974; Po¨tter et al., 1997; Zegota, 1999; Cordis et al., 1998; Zlotor- zynska & Lai, 1999) and are ...

6

Compressed Oil Palm Fronds Composite: A Preliminary Study on Mechanical Properties

Compressed Oil Palm Fronds Composite: A Preliminary Study on Mechanical Properties

... Note: Number of replicates for each parameter = 5 Total number of replicates = 90 In order to investigate the effect of maturity groups to compression strength of compressed oil palm fronds composite, the data in Table 4 ...

11

Show all 481 documents...

Related subjects