• No results found

spin-coated

Enhancing the Properties of Sol Gel Spin Coated PZT thin Films by Varying Annealing Temperature K. Kathiresan 1* , S. Rajavelu 2

Enhancing the Properties of Sol Gel Spin Coated PZT thin Films by Varying Annealing Temperature K. Kathiresan 1* , S. Rajavelu 2

... the spin coating ...been spin coated on the stainless steel substrate, using the optimized coating ...The Spin coated PZT films have been annealed in the temperature range 500 C, ...

5

Determination of Volatile Organic Compounds by a Novel Polymer Spin Coated Thin Film and Surface Plasmon Resonance

Determination of Volatile Organic Compounds by a Novel Polymer Spin Coated Thin Film and Surface Plasmon Resonance

... by spin coating at speeds from 1000 to 5000 ...the spin coated ...polymer spin coated films were exposed to volatile organic vapors in order to characterize their sensing properties by ...

32

Influence of pH on Structural and Optical Properties of Spin Coated ZnO Thin Films

Influence of pH on Structural and Optical Properties of Spin Coated ZnO Thin Films

... Merck) were used to prepare the coating solution and its pH was varied by adding ammonia and was spin coated on glass substrates at 2000 rpm for 30s. After each deposition the films were pre-heated at 200°C ...

5

Conductivity of PEDOT:PSS on Spin Coated and Drop Cast Nanofibrillar Cellulose Thin Films

Conductivity of PEDOT:PSS on Spin Coated and Drop Cast Nanofibrillar Cellulose Thin Films

... The spin-coated NFC-G layer serves two purposes as shown in ...directly spin coated on top of it, and secondly, it serves as a rigid underlayer in which the drop cast NFC-G coating ad- heres ...

10

Effect of annealing atmosphere and temperature on the properties of the sol-gel spin coated Cu2ZnSnS4 (CZTS) thin films

Effect of annealing atmosphere and temperature on the properties of the sol-gel spin coated Cu2ZnSnS4 (CZTS) thin films

... The FTO substrate (20 mm X 20 mm X 2 mm) was etched with Zn powder and 2 M HCl diluted in water, then cleaned with DI water first, then sonicated with acetone for 10 mins, further it was rinsed in double distilled water ...

5

Effect of Annealing Temperature and Atmosphere to Surface Solid Phase Reaction of Sapphire Substrates and Spin Coated Copper Nitrate Gel Films

Effect of Annealing Temperature and Atmosphere to Surface Solid Phase Reaction of Sapphire Substrates and Spin Coated Copper Nitrate Gel Films

... was spin-coated onto a c -oriented single-side-polished sapphire substrate with a thickness of ...Before spin-coating of the copper source solution, the sapphire substrates were degreased by ...

10

Properties of Home Made Spin Coated TiO2 Thin Film

Properties of Home Made Spin Coated TiO2 Thin Film

... A typical process involves depositing a small puddle of liquid resin onto the centre of a substrate and then spinning the substrate at a very high speed. Centripetal acceleration will cause most of resin to spread to, ...

10

Spin coated (Mx, Zn1-x O), M= Sn, Al nanofibers investigation

Spin coated (Mx, Zn1-x O), M= Sn, Al nanofibers investigation

... M-doped zinc oxide films were fabricated onto a glass substrate by a facile and low cost spin coating route. X-rays analysis reveals that films crystallize with a wurtzite structure according to (002) orientation. ...

9

Influence of Thickness and Annealing Temperature on the Optical Properties of Spin Coated Photoactive P3HT:PCBM Blend

Influence of Thickness and Annealing Temperature on the Optical Properties of Spin Coated Photoactive P3HT:PCBM Blend

... Influence of annealing temperature and thickness on the optical characteristics of the blend of poly (3-hexylthiophene) (P3HT) and Phenyl C61 butyric acid methylester (PCBM) layer has been investigated in this report. ...

5

Surface Texture and Luminous Analysis of Sol Gel Spin Coated Dy doped ZnO Thin Films

Surface Texture and Luminous Analysis of Sol Gel Spin Coated Dy doped ZnO Thin Films

... dissolved in (IPA) Isopropyl alcohol as stabilizer and dysprosium dopant source, respectively. The molar ratio of EA to Dy and Zn acetate was maintained at 1.0. These solutions of 0.5M were mixed together in nominal ...

7

Broadband antireflective silicon nanostructures produced by spin coated Ag nanoparticles

Broadband antireflective silicon nanostructures produced by spin coated Ag nanoparticles

... tapered profile on Si substrates without using any lithog- raphy steps. To achieve this goal, nano-scale silver (Ag) etch masks were formed using spin-coating Ag ink and subsequent sintering process. The ...

7

Spin Coated Tin Oxide Thin Film For Optical And Optoelectronic Material Applications

Spin Coated Tin Oxide Thin Film For Optical And Optoelectronic Material Applications

... on a commercial glass substrate at room temperature using spin coating deposition technique. The film was characterized for optical and micro structural characteristics. Optical application of the tin film ...

5

Investigation on photo-response characteristics of cadmium sulfide (CdS) thin films developed by sol-gel spin coating technique with different annealing temperatures for Night Light Application

Investigation on photo-response characteristics of cadmium sulfide (CdS) thin films developed by sol-gel spin coating technique with different annealing temperatures for Night Light Application

... Understanding the electrical properties of the Sol-gel spin coated CdS thin films were recorded by using four - probe Method. Contacts of the CdS thin films were taken and these are connected to the four ...

11

Water Based Inkjet Material Deposition Of Donor-Acceptor Nanoparticles For Usage In Organic Photovoltaics

Water Based Inkjet Material Deposition Of Donor-Acceptor Nanoparticles For Usage In Organic Photovoltaics

... are spin coated as well as inkjet printed onto poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) coated indium tin oxide (ITO) ...

142

New TiO2 Double Layer Nano Particulate Photo Anode for Highly Efficient Dye Sensitized Solar Cells (DSSC)

New TiO2 Double Layer Nano Particulate Photo Anode for Highly Efficient Dye Sensitized Solar Cells (DSSC)

... 5 λ plasma zone (deposition time: 20 min), and the third (cell 3) the formation of a double layer by combining both methods. In case of cell 4 the length of the plasma zone was reduced in comparison to cell 3. The ionic ...

15

Poly(lactic acid) Polymer Brushes as Dynamic Surfaces.

Poly(lactic acid) Polymer Brushes as Dynamic Surfaces.

... the spin coated PLA layer suggests the different molecular organizations on the ...For spin coated samples, the polymer chains are randomly piled on the surface with random ...the ...

171

DEVELOPMENT OF PVDF THIN FILMS

DEVELOPMENT OF PVDF THIN FILMS

... Spin coated films at initial and grey prediction parameters were characterized to found the β -phase content, and it was found out that the β-phase was highest in the film produced by grey prediction ...

12

Properties of Spin Bath of Graphene-Like Nanocarbon

Properties of Spin Bath of Graphene-Like Nanocarbon

... electron spin bath embedded in graphene – like nanocarbon (GNCs) ...The spin transport data was obtained using electron spin resonance spectroscopy, carried out at ...as spinspin, ...

7

Optical and Structural Properties of Zinc Oxide Nanowires Fabricated by Hydrothermal Method

Optical and Structural Properties of Zinc Oxide Nanowires Fabricated by Hydrothermal Method

... ZnO nanowires were prepared by wet chemistry method in two steps. In first step the ZnO seed layer deposited on glass substrate using sol- gel spin coating method and after that the ZnO nanowires grown on this ...

7

Preparation and Characterization of Novel Octa-iso- Pentyloxymetallophthalocyanines(M= Pb,Ni,Cu) Gas Sensors

Preparation and Characterization of Novel Octa-iso- Pentyloxymetallophthalocyanines(M= Pb,Ni,Cu) Gas Sensors

... The gas sensitivity of MPcs is based on their electronic conductivity, namely the difference of energy level between valence band and conduction band. Central metal ions have many influences on the HOMO, LUMO and energy ...

9

Show all 5180 documents...

Related subjects