• No results found

stainless steel (SS)

Cavitation Erosion and Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

Cavitation Erosion and Wear Mechanisms of AlTiN and TiAlN Films Deposited on Stainless Steel Substrate

... Cavitation erosion and sliding wear tests were conducted for bare stainless steel grade SS304 95.. (SS) and SS coated with PVD films.[r] ...

16

Effect of Heat-Treatment of Manganese Oxide Deposited on Stainless Steel 316L Current Collector Surface towards Carbon Based Supercapacitor Performance

Effect of Heat-Treatment of Manganese Oxide Deposited on Stainless Steel 316L Current Collector Surface towards Carbon Based Supercapacitor Performance

... of stainless steel (SS) foil current collector (CC) using a simple immersion method followed by heat-treatment at three different temperatures (70, 200 and 400 °C) for 3 ...

19

The Influence of Hypochlorite-Based Disinfectants on the Pitting Corrosion of Welded Joints of 316L Stainless Steel Dairy Reactor

The Influence of Hypochlorite-Based Disinfectants on the Pitting Corrosion of Welded Joints of 316L Stainless Steel Dairy Reactor

... 316L stainless steel-made dairy reactor contributed to the development of significant pitting, which was entirely confined to the welding zone of the ...austenitic SS structure was observed for both ...

9

Synthesis of Different Layers of Graphene on Stainless Steel Using the CVD Method

Synthesis of Different Layers of Graphene on Stainless Steel Using the CVD Method

... a stainless steel (SS) mesh coated with Cu catalyst by using the chemical vapor deposition (CVD) ...the SS mesh consisted of different types of metals, such as Fe, Ni, and Cr, which can also ...

6

Testing and Comparative Study on Stainless Steel (SS 316) and Mild Steel (E250 BR IS 2062) performed by TIG, MIG and ARC Welding Processes

Testing and Comparative Study on Stainless Steel (SS 316) and Mild Steel (E250 BR IS 2062) performed by TIG, MIG and ARC Welding Processes

... To develop mathematical models to accurately predict the weld strength to be fed to the automated welding systems has become more essential. After performing various sawyers in various industrial area. In that surveys we ...

5

Electrochemical Machining of SS (Stainless Steel) 202 Bharanidharan R 1, Krishnan V2

Electrochemical Machining of SS (Stainless Steel) 202 Bharanidharan R 1, Krishnan V2

... Electrochemical machining (ECM) is a non-traditional manufacturing process that can machine difficult-to-cut materials. In ECM, the material is removed by controlled electrochemical dissolution of an anodic workpiece in ...

5

Active Hydroxyl Groups on Surface Oxide Film of Titanium, 316L Stainless Steel, and Cobalt Chromium Molybdenum Alloy and Its Effect on the Immobilization of Poly(Ethylene Glycol)

Active Hydroxyl Groups on Surface Oxide Film of Titanium, 316L Stainless Steel, and Cobalt Chromium Molybdenum Alloy and Its Effect on the Immobilization of Poly(Ethylene Glycol)

... The materials employed in this study were a commer- cially pure Ti with grade 2, cp-Ti, (Rare Metallic Co., Ltd., Japan), a type 316L austenitic stainless steel, SS, (Daido Steel Co., Ltd., ...

7

Preparation, Characterization and Application of Stainless Steel/Fe, Co, Ni Electrocatalyst Electrodes

Preparation, Characterization and Application of Stainless Steel/Fe, Co, Ni Electrocatalyst Electrodes

... using stainless steel substrate which is coated by Fe, Co, Ni as electro-deposition with linear voltammetric method, afterward it was used as electro-catalyst electrodes in the production of hydrogen gas by ...

10

Atmospheric Corrosion Studies of Ductile Iron and Austenitic Stainless Steel in an Extreme Marine Environment

Atmospheric Corrosion Studies of Ductile Iron and Austenitic Stainless Steel in an Extreme Marine Environment

... The importance of austenitic stainless steel (ASS) in in- dustrial applications and development cannot be over- emphasized. Its excellent properties which range from high tensile strength, good impact, ...

5

Anti-corrosion Properties of a Bioinspired superhydrophobic surface on Stainless Steel

Anti-corrosion Properties of a Bioinspired superhydrophobic surface on Stainless Steel

... on stainless steel via a two-step etching method; the first step involves the fabrication of micron pore structures, whereas the second step is patterning nano pits on these micro pore ...superhydrophobic ...

10

Oxazole Derivatives as Corrosion Inhibitors for 316L Stainless Steel in Sulfamic Acid Solutions

Oxazole Derivatives as Corrosion Inhibitors for 316L Stainless Steel in Sulfamic Acid Solutions

... solutions by potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The results showed the variation in inhibition performance of the ...

13

Degradation of austenitic stainless steel (SS) light water reactor (LWR) core internals due to neutron irradiation

Degradation of austenitic stainless steel (SS) light water reactor (LWR) core internals due to neutron irradiation

... typically swells more than Type 316 SS. However, radiation-induced precipitation of second phase particles can remove Ni, P, and Si from the alloy matrix, and thereby increase void swelling. In addition, cold work ...

8

Investigation on liquid flow characteristics in microtubes

Investigation on liquid flow characteristics in microtubes

... SS, FS, PEEK stand for stainless steel, fused silica, and poly-ether-ether-ketone, respectively, the number stands for the diameter of tested microtube, No 15 and No 17 are the numbers o[r] ...

58

Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization

Pulsed DC- Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured Tantalum Film: Synthesis and Characterization

... In recent studies, much attention has been given to surface modification of AISI 316L stainless steel for biomedical applications [1,2]. AISI 316L SS implants are susceptible to pitting, especially ...

7

Studies on New Type Current Collectors for Polyaniline Batteries

Studies on New Type Current Collectors for Polyaniline Batteries

... conclusion, Stainless steel (SS) and carbon fiber (CF) exhibit higher stability than the others which are corroded by ...of SS loaded PANI is much higher than that of ...

13

Oxidation Effects on wear Resistance of SS 304 and SS 316 Austenitic Stainless Steels

Oxidation Effects on wear Resistance of SS 304 and SS 316 Austenitic Stainless Steels

... 316L stainless steel may occur without any ill effect on high temperature oxidation ...the stainless steels ...304 stainless steel by using cathodic vacuum arc deposition (CVAD) ...the ...

5

Detection and Persistence of Clinical Escherichia coli in Drinking Water Evaluated by a Rapid Enzyme Assay and qPCR

Detection and Persistence of Clinical Escherichia coli in Drinking Water Evaluated by a Rapid Enzyme Assay and qPCR

... on stainless steel (SS) and polyethylene (PE) surfaces were studied in a flow-through reactor with non-disinfected drinking water using ColiLight II, qPCR, ATP bioluminescence, and ...

11

Radiation Damage Assessment in the Reactor Pressure Vessel of the Integral Inherently Safe Light Water Reactor (I2S-LWR)

Radiation Damage Assessment in the Reactor Pressure Vessel of the Integral Inherently Safe Light Water Reactor (I2S-LWR)

... neutron steel reflector made of SS-304 with an outer radius of 165 ...different steel and water volume ratios (100%/0%, 90%/10%, ...low-carbon steel with stainless steel clad ...

9

Cytokine induction of sol–gel-derived TiO2 and SiO2 coatings on metallic substrates after implantation to rat femur

Cytokine induction of sol&ndash;gel-derived TiO<sub>2</sub> and SiO<sub>2</sub> coatings on metallic substrates after implantation to rat femur

... of stainless steel 316L (SS) and titanium alloy (Ti6Al4V) biomaterials coated with titanium dioxide (TiO 2 ) and silica (SiO 2 ) coatings prepared by sol–gel ...on SS and Ti6Al4V significantly ...

7

Investigation and Analysis of A PV Stand-Alone System for Industrial Leather Processing

Investigation and Analysis of A PV Stand-Alone System for Industrial Leather Processing

... conventional stainless steel (SS) leather tanning drum was chosen for this purpose and power supply system was redesigned using improved tubular lead acid battery bank, DC-AC inverter, solar charge ...

12

Show all 10000 documents...

Related subjects