Warp and Weft Direction
Evaluation of Color Difference, Whiteness, and Luster of Multifilament Polyester Woven Fabrics
... pattern, weft density, dye concentration, and interaction between super bright warp yarns and semi dull weft ...Plain, weft rib (2/2), sateen (1/4)(3) and steep twill(2/3) was selected as ...
8
Geometrical modelling of 3D woven reinforcements for polymer composites: prediction of fabric permeability and composite mechanical properties
... of weft yarns on the fabric surface (“dimples”, ...in warp and weft direction ...of weft yarns on the fabric surfaces and changes in bundle shape are not considered, and artificial gaps ...
31
Towards Reliability Enhanced Mechanical Characterization of Non Crimp Fabrics: How to Compare Two Force Displacement Curves against a Null Material Hypothesis
... the warp and weft direction responses of a presumably balanced NCF under all deformation modes, with weft yarns be- ing generally ...of warp-weft cou- plings under both ...
19
Development of Fabric from Girardina Diversifolia Stem Fibres and its Blends
... the warp direction and the blended yarns in the weft direction ; 100% bamboo yarns in warp direction with the nettle blended yarns in the weft ...the warp and ...
8
Analysis of Failing load and Optimization of Hot Air Welding Parameters on PVC Acrylic Coated Polyester Fabric by Taguchi and ANOVA Technique
... in warp and weft direction. The average S/N ratio in warp and weft direction are ...in warp and weft direction are tabulated in Table 4 and Table ...in ...
14
Composites from Natural Fibers: Hemp Fiber Reinforced Composites from 3D Orthogonal Woven Preforms and their Potential Applications in the US.
... The combines loading compression (CLC) governs compression and stiffness properties of the composite panels. This test was specifically applicable to a balanced and symmetric structure which fits perfect with the ...
294
The Experiential Analysis of Woven Fabric for Reproduction
... The spiral character of yarn that is basically the consequence of relative rotation of head and tail of a same yarn, that is called yarn twist. It is an important factor of yarn, which enhances the strength. It will be ...
31
EFFECT OF WEAVING CONSTRUCTION AND BLENDING RATIO ON SELF-CLEANING PROPERTIES OF POLYESTER AND POLYESTER/COTTON BLEND FABRICS TREATED WITH TiO 2NANOPARTICLES
... in warp direction and using 50/50 cotton/PES yarns in weft direction (Table II and Figure 3) as well as those fabrics constructed for 100 % PES yarns in weft and warp ...
11
Comparison of cone and OSU calorimetric techniques to assess the flammability behaviour of fabrics used for aircraft interiors
... Two test methods for measuring the heat release rate, HRR have been compared on fabric composites used for aircraft interior materials as side-wall panels. These methods are based on the principles of direct measurement ...
26
The Comfort Properties of the Terry Towels Made of Cotton and Polypropylene Yarns
... both direction (weft and warp) values are studied; it is seen that the increase in pile height causes an increase in the fabric samples’ velocity of water absorption value in the weft ...
10
An Experimental Investigation to Examine the Wicking Properties of Silk Fabrics
... the weft direction wicking height and velocity was significantly quicker at the beginning of the wicking ...both weft and warp directions, but at the beginning the weft direction ...
17
A Review on the Poisson’s Ratio of Fabrics
... and weft density on the Poisson’s ratio of worsted fabric under uniaxial extension were ...different weft densities were examined. Samples were extended in weft direction uniaxially, and the ...
12
Determining Formability Function of Worsted Woven Fabrics in Terms of Fabric Direction
... from warp and weft yarns, their interlacing points change from warp direction to weft direction and can affect its ...between warp direction and sample cutting ...
10
Effect of Resin Finish for Crinkle Appearance on Bending and Tensile Properties of Denim Fabrics
... in warp direction for sample –A, tensile strength decreases about ...in weft direction, for sample –A tensile strength decreases about ...the warp yarn after resin sprayed on the sample ...
7
Automated geometric modelling of textile structures
... Figure 19 gives the modeled deformed unit cell under the four principal loadings: tension, compression, shear and bending. Comparison between the predicted mechanical properties and experimental data shows that the model ...
25
5. THE IMPACT OF FABRIC STRUCTURE AND WASHING/DRYING ON SEAM QUALITY OF WOVEN COTTON APPAREL
... and weft) is presented in figure 2 (a, ...the weft direction contrarily in the warp direction for both ...in weft direction and to decrease in the warp ...
9
Warp & Weft
... the warp and the weft. Warp creates a vertical tension that works in contrast to the horizontal weft, which moves over and under the warp to build a grid of contact points between the ...
86
Experimental Characterization by Fluorescence of Capillary Flows in the Fiber Tows of Engineering Fabrics
... Furthermore, the experimental values of axial tow permeability obtained by the capillary rise method were consistent with predictions of Blake-Kozeny-Carman model and with the scientific literature. Experimental results ...
21
Use of regression to study the effect of fabric parameters on the adhesion of 3D printed PLA polymer onto woven fabrics
... density, warp count (Tex), weft count (Tex), fabric thickness and fabric handle indicated a positive correlation with adhesion of PLA onto woven ...hand, warp ends/inch and weft picks/inch ...
12
Study and Characterization of Small Diameter Woven Tubular Fabrics
... Woven tubular structures have been used since 1950s as vascular grafts in repairing damaged or diseased arteries and veins. The grafts for large caliber blood vessels have achieved some success, however, an ideal ...
108