• No results found

Wear Resistance

Engine oil wear resistance

Engine oil wear resistance

... Viscosity of oil plays a vital role in selecting a lubricant because correct lubricant will help to maximize engine life. Society of Automotive Engineers (SAE) has developed viscosity classification to engine oils to ...

11

Effect of Chromium Content Variation on Wear Resistance of Rotavator Blades

Effect of Chromium Content Variation on Wear Resistance of Rotavator Blades

... Hardfacing is a low cost method of depositing wear resistant surfaces on metal components to extend service life. Among the surface modification techniques used in engineering applications, hardfacing probably is ...

6

The Effect of Testing Temperature on Wear Resistance of Metals Reinforced with Ceramic Particle

The Effect of Testing Temperature on Wear Resistance of Metals Reinforced with Ceramic Particle

... The wear resistance of a (A 356) Aluminium alloy reinforced with silicon carbide particles was studied as a function of ....The wear rate increased with the increasing in the ...the wear rate ...

6

Effect of Austempering Time on Microstructure and Wear Resistance of Ductile Iron Castings

Effect of Austempering Time on Microstructure and Wear Resistance of Ductile Iron Castings

... OALibJ | DOI: 10.4236/oalib.1101032 5 November 2014 | Volume 1 | e1032 pering temperatures is the critical austempering time after which the weight loss reaches a minimal steady state (60 - 120 min at 350˚C & 240 min ...

5

COMPARATIVE EVALUATION OF ABRASIVE WEAR RESISTANCE OF VARIOUS STAINLESS STEEL GRADES

COMPARATIVE EVALUATION OF ABRASIVE WEAR RESISTANCE OF VARIOUS STAINLESS STEEL GRADES

... carbide particles present in the steel play a major role in determining the hardness, strength, toughness, corrosion resistance, and wear resistance of the steel [20]. Stainless steels containing ...

16

The role of TiC on the hardness and wear resistance of AA 7075 using GTA

The role of TiC on the hardness and wear resistance of AA 7075 using GTA

... and wear resistance of AA 7075 by reinforcing Titanium Carbide (TiC) particles onto the aluminium alloy surface using Gas Tungsten Arc (GTA) as a heat ...sliding wear tests were conducted using a pin ...

11

The Wear Resistance of Cryogenically Treated Diamond-Like Carbon Films

The Wear Resistance of Cryogenically Treated Diamond-Like Carbon Films

... the wear rate of each specimen, as shown in Table ...the wear rate measurement. The rating of the wear resistance of the specimens was C3> 3> C2> 2> C1> 1> CS> ...the ...

9

Wear Resistance and Indentation Behavior of Equiatomic Superelastic TiNi and 60NiTi

Wear Resistance and Indentation Behavior of Equiatomic Superelastic TiNi and 60NiTi

... performed wear tests on superelastic TiNi and compared to Ti, Ni and AISI 304 steel using pin-on-disc ...higher wear resistance than pure Ti and Ni, ...sliding wear behavior of ...higher ...

13

The Use of Nitriding to Enhance Wear Resistance of Cast Irons and 4140 Steel

The Use of Nitriding to Enhance Wear Resistance of Cast Irons and 4140 Steel

... abrasive wear.[115] The wear behavior of thermal sprayed iron-based-alloy-coatings were studied by means of the Pin-on-Disc test with two counterparts made of stainless steel and ...improved wear ...

138

Increasing Tribo Unit Wear Resistance with the Ion-Plasma Coating

Increasing Tribo Unit Wear Resistance with the Ion-Plasma Coating

... plasma wear-resistant coatings, which significantly improve the performance characteristics of materials of tribo surfaces, are the chemical deposition from a gaseous medium and condensation of a solid substance ...

7

Investigation of Structure and Wear Resistance of Nanocomposite Coating of Chemical Nickel

Investigation of Structure and Wear Resistance of Nanocomposite Coating of Chemical Nickel

... It is known, that physical and mechanical properties and wear resistance of coatings are determined with their element composition and structure. That is why the study of these parameters, which are formed ...

9

Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy

Enhancing Wear Resistance of Squeeze Cast AC2A Aluminum Alloy

... 5. 5. Discussion on Optimum Conditions The optimum setting for C and E was noted to be almost the same in gravity casting, Taguchi method and XL solver. From this, it is clearly understood that increased pressure ...

10

Wear Resistance Enhancement of Cutting Tools in CNC Machine

Wear Resistance Enhancement of Cutting Tools in CNC Machine

... a wear-resistant layer (Composition- TiCrAlN- multilayered), its thickness being ...of wear-resistant and intermediate layers being 25 ...least wear resistance coefficient and the composition ...

7

IMPROVING WEAR RESISTANCE OF PISTON DIE THROUGH HARDFACING

IMPROVING WEAR RESISTANCE OF PISTON DIE THROUGH HARDFACING

... on wear resistance are shown in ...the wear loss is minimum for E1 type electrode and maximum for E3 type ...The wear loss for E1 types electrode is ...the wear loss is minimum for 140A ...

6

Study on wear resistance and corrosion resistance of sucker rod couplings after surface ultrasonic nano crystallization treatment

Study on wear resistance and corrosion resistance of sucker rod couplings after surface ultrasonic nano crystallization treatment

... the wear resistance of mechanical ...abrasion resistance, tightness, fatigue resistance, corrosion resistance performance can be significantly ...

7

Uni  and multidirectional wear resistance of different crosslinking degrees in UHMWPE for artificial joints

Uni and multidirectional wear resistance of different crosslinking degrees in UHMWPE for artificial joints

... higher wear for the irradiated and crosslinked UHMWPEs (XLPEs) than for the unirradiated UHMWPE ...UHMWPE wear obtained for the irradiated materi- als and XLPEs were in the same order, yielding a ...the ...

9

A Review Study of Investigation on Titanium Alloy Coatings for Wear Resistance by PVD Method

A Review Study of Investigation on Titanium Alloy Coatings for Wear Resistance by PVD Method

... for Wear Resistance by PVD ...Superior Wear Resistance, Superior Corrosion Resistance, Superior Chemical Resistance, and Low Coefficient of ...

6

Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel

Study of the Effect of Gas Nitriding Time on Microstructure and Wear Resistance of 42CrMo4 Steel

... of wear tests for the various nitrided states (T1, T2, T3 and T4), reveal that the wear resistance is closely related to the surface hard- ness and not the thickness of the nitrided ...the ...

16

Wear Resistance of Steels with Surface Nanocrystalline Structure Generated by Mechanical Pulse Treatment

Wear Resistance of Steels with Surface Nanocrystalline Structure Generated by Mechanical Pulse Treatment

... The positive effect of the rings MPT strengthening on the wear resistance of untreated inserts (Figs. 5b and 6b) could be explained by a decrease in the friction coeffi- cient in the specimen—counter body ...

5

Mg2Si Coating Technology on Magnesium Alloys to Improve Corrosion and Wear Resistance

Mg2Si Coating Technology on Magnesium Alloys to Improve Corrosion and Wear Resistance

... abrasive wear by a hard pin specimen occured on the disc surface from the observation of the sliding surface after a ...superior wear resistance to the crystallized one in applying a higher load of ...

5

Show all 10000 documents...

Related subjects