PROGRAMMING OPTIMISED BORING OPERATIONS

The options available in this type of programming are described below:

5.7.1 Vertical boring on straight line

1) From the «EDITOR\OPTIMISED BORINGS» page, select the command.

2) Press the ENTER key to set up the fields as indicated below.

<Sp>: number of the reference corner, for the initial boring co-ordinates.

<X>: initial co-ordinate of the boring along axis X.

<Y>: initial co-ordinate of the boring along axis Y.

<PRF>: depth of boring.

<D>: diameter of boring.

<Rip>: repetition of the boring.

<Tool>: type of tool.

Select <norm> for blind boring, <lanc> for through boring, <N.l.> for boring with diameter above 14 mm, <Ctsk> for tapered boring.

<Type>: type of repetition of the boring.

Select <-> to repeat on a straight line.

<Repeat>: total number of borings to execute during the repetition.

<Stepx>: centre distance between each boring to be executed along axis X, during the repetition.

<Stepy>: centre distance between each boring to be executed along axis Y, during the repetition.

3) Press the ENTER key on the <OK> field to confirm the programming. Press the ESC key to cancel.

PROGRAMMING OPTIMISED BORING OPERATIONS

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

5.7.2 Vertical boring on angled line

1) From the «EDITOR\OPTIMISED BORINGS» page, select the command.

2) Press the ENTER key to set up the fields as indicated below.

<Sp>: number of the reference corner, for the initial co-ordinates of the boring operation and the angle of the line for the repetition of the boring.

<X>: initial co-ordinate of the boring along axis X.

<Y>: initial co-ordinate of the boring along axis Y.

<PRF>: depth of boring.

<D>: diameter of boring.

<Rip>: boring repetition set-up.

<Tool>: type of tool.

Select <Norm> for blind boring, <Lanc> for through boring, <N.l.> for boring with diameter Above 14 mm, <Ctsk> for tapered boring.

<Type>: type of repetition.

Select <\> to repeat along an angled line.

<Repeat>: total number of borings to execute during the repetition.

<Step>: centre distance between each boring to be executed along the angled line, during the repetition.

<Angle>: angle of the line, from the side of the panel which is common with the direction of axis X.

3) Press the ENTER key on the <OK> field to confirm the programming. Press the ESC key to cancel.

Step

Co X

Y

Ang

Norm Lanc N.l. Ctsk

DPT

D >14 mm

5

BASIC PROGRAMMING

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

5.7.3 Vertical boring on circumference

1) From the «EDITOR\OPTIMISED BORINGS» page, select the command.

2) Press the ENTER key to set up the fields as indicated below.

<Sp>: number of the reference corner, for the initial co-ordinates of the boring and the circle for the repetition of the boring.

<X>: initial co-ordinate of the boring along axis X.

<Y>: initial co-ordinate of the boring along axis Y.

<PRF>: depth of boring.

<D>: diameter of boring.

<Rip>: boring repetition set-up.

<Tool>: type of tool.

Select <Norm> for blind boring, <Lanc> for through boring, <N.l.> for boring with diameter above 14 mm, <Ctsk> for tapered boring.

<Type>: type of repetition.

Select <o> to repeat on a circle.

<Repeat>: total number of borings to execute during the repetition.

<Xc>: co-ordinate of the centre of the circumference along axis X.

<Yc>: co-ordinate of the centre of the circumference along axis Y.

<Angle>: angle of the centre distances between each boring to be executed along the circumference, during the repetition.

3) Press the ENTER key on the <OK> field to confirm the programming. Press the ESC key to cancel.

Sp X

Y Yc

Xc

Ang

Ctsk.

Norm Lanc N.l.

DPT

D >14 mm

PROGRAMMING OPTIMISED BORING OPERATIONS

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

5.7.4 Horizontal boring on straight line

1) From the «EDITOR\OPTIMISED BORINGS» page, select the command.

2) Press the ENTER key to set up the fields as indicated below.

<L>: number of the side on which the boring is to be executed.

<Sp>: number of the reference corner, for the initial co-ordinates of the boring.

<X>: initial co-ordinate of the boring along axis X.

<Y>: initial co-ordinate of the boring along axis Y.

<Z>: initial co-ordinate of the boring along axis Z.

<PRF>: depth of boring.

<D>: diameter of boring.

<Rip>: boring repetition set-up.

<Tool>: type of tool.

Select <Norm> for blind boring, <Lanc> for through boring, <N.l.> for boring with diameter above 14 mm, <Ctsk> for tapered boring.

<Repeat>: total number of borings to execute during the repetition.

<Stepx>: centre distance between each boring to be executed along axis X, during the repetition.

<Stepy>: centre distance between each boring to be executed along axis Y, during the repetition.

<Stepz>: centre distance between each boring to be executed along axis Z, during the repetition.

3) Press the ENTER key on the <OK> field to confirm the programming. Press the ESC key to cancel.

Stepx Sp

X Y

Z Z

Stepy

Stepz

Stepz ^{Norm Lanc N.l. Ctsk}

DPT

D >14 mm

5

BASIC PROGRAMMING

BIESSE S.p.A. Woodworking Machinery

0405e02f.fm - biesse120100

In document NC410_5804a0032_V42_En (Page 62-66)