Test Terminal
Step 2 Click the Chart General tab, and then set relevant parameters Step 3 After the configuration, click OK.
----End
Related References
12.5 Interface Description: Test Data View
12.19 Parameters for Configuring the Properties of the List Views
10.3.4 Configuring the Plain Text View
The plain test view displays the basic information about the logfile and the events and statistics in the logfile in plain texts. You can configure the properties of the plain text view as required to facilitate data browse and data analysis.
Prerequisite
The view window to be configured is displayed. For details, see 10.2 Browsing Data.
Context
For the description of the view window, see 12.5 Interface Description: Test Data View. The plain text views provided by the Probe consist of the information view, event list view, and statistics view. They are used to display the basic information about the logfile, the event information, and the statistics of events and KPIs in the logfile.
Procedure
l Configure the properties of the event list view and the statistics view.
1. Right-click any area in the view, and then choose Event Filter or KPI Filter from the shortcut menu.
The list in the left pane of the event list view or the statistics view displays the events or KPIs provided by the Probe.
2. From the list in the left pane of the view, select the event or KPI to be displayed. 3. Optional: During the test or replay, right-click any area in the view, and then choose
Clear List from the shortcut menu. The displayed events or KPIs are cleared. l Configure the properties of the information view.
1. Choose View > Information. The Information view window is displayed. NOTE
l The Log File tab page displays the information related to logfiles.
l The FTP Info tab page displays the information related to FTP upload or download. l The PHU Info tab page displays the version of the PHU terminal.
You can check the version of the PHU terminal during terminal connecting or data replaying. When the Probe can not get the version of the PHU terminal, the Unknown
Version will be displayed.
l The IE Audio Indications Info tab page displays the Information Elements (IEs) which played audio indications.
2. Right-click any area in the Information view window, and then choose Font from the shortcut menu. Then, configure the fonts of the texts in the view window. The Copy menu item is used to copy the texts in the view window to the clipboard of the Windows. Then, the texts can be pasted to other documents conveniently. ----End
Related References
12.5 Interface Description: Test Data View
10 Managing View Windows
GENEX Probe User Guide
10-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11
Typical Application
About This Chapter
This section describes typical test methods supported by the Probe.
11.1 Speech Quality Evaluation Tests (GSM/WCDMA)
The voice service is a basic radio network service. The Probe supports speech quality evaluation tests. The Probe uses the Perceptual Evaluation of Speech Quality (PESQ) algorithm to evaluate the speech quality by comparing the speech sample file and the speech result file.
11.2 Forcing Function Tests
The Probe supports forcing function tests in GSM, WCDMA, and LTE modes. The forcing function test involves the setting of the GSM NV (Nonvolatile) parameter, carrier-to-adjacent (C/A) measurement, forcing feature test, and frequency scanning.
11.3 IP Analysis
The Probe obtains the raw data packets of data service tests through the WinPcap tool and then obtains the information about the transport layer protocols and the network layer protocols through the IP analysis.
11.1 Speech Quality Evaluation Tests (GSM/WCDMA)
The voice service is a basic radio network service. The Probe supports speech quality evaluation tests. The Probe uses the Perceptual Evaluation of Speech Quality (PESQ) algorithm to evaluate the speech quality by comparing the speech sample file and the speech result file.
11.1.1 Synchronous Speech Quality Evaluation Test
This section describes the synchronous speech quality evaluation test. One Probe is connected with two PHU terminals and performs the synchronous speech quality evaluation test by enabling the calling PHU terminal to play speech sample and the called PHU terminal to record result file so that the MOS is obtained.
11.1.2 Asynchronous Speech Quality Evaluation Test
This section describes the asynchronous speech quality evaluation test. Two PHU terminals that are configured for different Probes call each other. The Probes perform the asynchronous speech quality evaluation test by enabling the PHU terminals to play and record speech files alternatively so that the MOS is obtained.
11.1.3 Speech Quality Evaluation Test Between PHU Terminal and PSTN SQE Server
This section describes the speech quality evaluation test between an MS and the PSTN SQE Server. The Probe is configured with a PHU terminal and performs the speech quality evaluation test between an MS and the PSTN SQE Server by enabling the PHU terminal to play voices and the PSTN SQE Server to record voices or enabling the PSTN SQE Server to play voices and the PHU terminal to record voices so that the uplink or downlink MOS is obtained.
11.1.1 Synchronous Speech Quality Evaluation Test
This section describes the synchronous speech quality evaluation test. One Probe is connected with two PHU terminals and performs the synchronous speech quality evaluation test by enabling the calling PHU terminal to play speech sample and the called PHU terminal to record result file so that the MOS is obtained.
Prerequisite
The Probe is configured with two terminals installed with the PHU of V100R002C01B010SPC120 or a later version.
Context
The PHU terminals supported by the Probe are Huawei U120e, Huawei U1205, Huawei U1251, and Huawei U6100.