Modular and scalable
Beside scalable NCU performance the SINUMERIK 840D sl also offers high modularity of the operating components. With a flexible M:N operating concept – e.g. the combination of any control panels with the NCU – the SINUMERIK 840D sl is perfectly adapted to the operating philosophy of modern premium machine concepts.
Benchmark in open architecture
The system openness of the SINUMERIK 840D sl is searching for its match. In this way the CNC can perfectly adapted to the technology of the machine and has a high degree of freedom in the production automation.
Communicative on all levels
With PROFINET the SINUMERIK 840D sl perfectly suits into the Siemens TIA world. Totally integrated automation stands for unique continuity – form field level over production up to the Enterprise Resource Planning
Compact and robust
With a maximum of CNC performance as well as a unique flex- ibility and openness unique on the market the SINUMERIK 840D sl is the basis for almost any machine concept. Efficient hardware architecture and intelligent control algorithms as well as a drive and motor technique of the top class provide for highest dynamic and accuracy during operation.
The CNC SINUMERIK 840D sl is completed by a comprehensive range of solutions for the IT integration. With these innovative, future-oriented solutions Siemens machine
tool systems ensures a maximum of productivity and availability
The suitable solution for any technological challenge
With the premium CNC SINUMERIK 840D sl Siemens
machine tool systems opens up all important technologies in the machine tool market. At the same time the SINUMERIK 840D sl is setting standards in the combination of different technologies for multitasking concepts
SINAMICS S120
– The servo drive is the perfect basis for modular system and machine concepts by an innovative system architecture and digital communication options – Large range of control modes and drive near technology functions
– Integrated safety functions
– Efficient engineering and rapid commissioning due to the tool SIZER (drive design) and STARTER (commissioning) – Auto configuration and auto tuning of the control functions
– Low-expenditure and continuous solutions by Totally Integrated Automation (TIA) and continuity of SINAMICS for automation level – Integrated SINAMICS S120 Webserver
– Voltage and performance range: 0.12 - 4.500 kW for the supply voltages 1AC 230 V, 3AC 380 - 480 V, 3AC 500 - 690 V – Control: U/f control vector control with/without encoder servo control with/without encoder
351433015 3-jaw lathe chuck manual Ø 200 mm · Instead of the serial equipment - · 3-jaw lathe chuck hydraulic Ø 150 mm
351433016 4-jaw lathe chuck manual Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 150 mm 351433018 3-jaw lathe chuck hydraulic Ø 200 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 150 mm 351433020 4-jaw lathe chuck hydraulic Ø 200 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 150 mm
3519706 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 150 mm 3519726 Rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 150 mm 3519707 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 200 mm (3514330 18) · for the 4-jaw lathe chuck hydraulic Ø 200 mm (3514330 20)
3519727 Rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 200 mm (3514330 18) · for the 4-jaw lathe chuck hydraulic Ø 200 mm (3514330 20)
L440
351441008 3-jaw lathe chuck manual Ø 200 mm
351441011 4-jaw lathe chuck manual Ø 250 mm
351441028 3-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351441031 4-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351441010 Non rigid block jaws · for the 3-jaw lathe chuck manual Ø 200 mm (3514410 08)
3519707 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 200 mm
3519727 Rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 200 mm
3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (3514410 28) · for the 4-jaw lathe chuck hydraulic Ø 250 mm (3514410 31)
3519728 Rigid block jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (3514410 28) · for the 4-jaw lathe chuck hydraulic Ø 250 mm (3514410 31)
L460
351442008 3-jaw lathe chuck manual Ø 200 mm
351442011 4-jaw lathe chuck manual Ø 250 mm
351442028 3-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351442031 4-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351442010 Non rigid block jaws · for the 3-jaw lathe chuck manual Ø 200 mm (351442008)
3519707 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic
Ø 200 mm
3519727 Rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic
Ø 200 mm
3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351442028)
· for the 4-jaw lathe chuck hydraulic Ø 250 mm (351442031) 3519728 Rigid block jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351442028)
Tec
hniq
ue
M
illin
g
Tur
nin
g
Sof
twa
re
A
cce
ss
ory
105
L520
351444006 3-jaw lathe chuck manual Ø 300 mm · 2’800 min-1, 103 mm Passage
351444019 3-jaw lathe chuck hydraulic Ø 300 mm · Instead of the serial equipment - hydraulic 3-jaw lathe chuck Ø 250 mm 351444027 4-jaw lathe chuck hydraulic Ø 300 mm · Instead of the serial equipment - hydraulic 3-jaw lathe chuck Ø 250 mm 351444008 Non rigid block jaws · for the 3-jaw lathe chuck manual Ø 300 mm (3514440 06)
351444007 Non rigid block jaws · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519728 Rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519709 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 300 mm (351444019)
· for the 4-jaw lathe chuck hydraulic Ø 300 mm (351444027) 3519729 Rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 300 mm (351444019)
· for the 4-jaw lathe chuck hydraulic Ø 300 mm (351444027)
L500
351443006 3-jaw lathe chuck manual Ø 300 mm ·2’800 min-1, 103 mm Passage
351443020 3-jaw lathe chuck hydraulic Ø 300 mm ·Instead of the serial equipment - hydraulic 3-jaw lathe chuck Ø 250 mm 351443029 4-jaw lathe chuck hydraulic Ø 300 mm ·Instead of the serial equipment - hydraulic 3-jaw lathe chuck Ø 250 mm 351443008 Non rigid block jaws ·for the 3-jaw lathe chuck manual Ø 300 mm (3514430 06 )
351443009 Non rigid block jaws ·for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519708 Non-rigid mounting jaw ·for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519728 Rigid mounting jaw ·for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm 3519709 Non-rigid mounting jaw ·for the 3-jaw lathe chuck hydraulic Ø 300 mm (3514430 20)
·for the 4-jaw lathe chuck hydraulic Ø 300 mm (3514430 29) 3519729 Rigid mounting jaw ·for the 3-jaw lathe chuck hydraulic Ø 300 mm (3514430 20)
·for the 4-jaw lathe chuck hydraulic Ø 300 mm (3514430 29)
S600
351506024 4-jaw lathe chuck hydraulic Ø 200 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351506008 3-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm 351506025 4-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 200 mm
3519707 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 200 mm
· for the 4-jaw lathe chuck hydraulic Ø 200 mm (351506024)
3519727 Rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 200 mm
· for the 4-jaw lathe chuck hydraulic Ø 200 mm (351506024) 3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351506008)
· for the 4-jaw lathe chuck hydraulic Ø 250 mm (351506025) 3519728 Rigid block jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351506008)
S750
351517013 4-jaw lathe chuck hydraulic Ø 200 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 250 mm 351517015 4-jaw lathe chuck hydraulic Ø 250 mm · Instead of the serial equipment - 3-jaw lathe chuck hydraulic Ø 250 mm
3519707 Non-rigid mounting jaw · for the 4-jaw lathe chuck hydraulic Ø 200 mm (3515170 13) 3519727 Rigid block jaw · for the 4-jaw lathe chuck hydraulic Ø 200 mm (3515170 13)
3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm
· for the 4-jaw lathe chuck hydraulic Ø 250 mm (3515170 15)
3519728 Rigid block jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 250 mm
· for the 4-jaw lathe chuck hydraulic Ø 250 mm (3515170 15) · for the 4-jaw lathe chuck hydraulic Ø 200 mm (351515013)
3519727 Rigid block jaw · for the 3-jaw lathe chuck included in the serial equipment hydraulic Ø 200 mm
· for the 4-jaw lathe chuck hydraulic Ø 200 mm (351515013) 3519708 Non-rigid mounting jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351515016)
· for the 4-jaw lathe chuck hydraulic Ø 250 mm (351515017) 3519728 Rigid block jaw · for the 3-jaw lathe chuck hydraulic Ø 250 mm (351515016)
Tec
hniq
ue
M
illin
g
Tur
nin
g
Sof
twa
re
A
cce
ss
ory
107
Rotary encoderThe rod loader Pro V 65 is a perfect solution for automatic loading of the CNC lathe with short rods. The loading magazine for the loader E is suitable for rod lengths of up to 1.200 mm and LE 1.500 mm.
The rod loader Pro V 65 offers a simple and economic alternative guaranteeing maximum productivity and little space requirement at the same time.
Easy operating unit and remote control
A user-friendly operating unit and remote control ensure the interplay of the loading magazine and the lathe.
Thus it is possible to safely and efficiently execute production processes. · Mitsubishi PLC controller
· Touch screen digital interface with LCD display
· Different settings of the functions and parameters are clearly visible on the display. In this way the operation is simple and well organized · Alarm indication for troubleshooting
· Basic functions can be performed by using the remote control
Pro V 65 E Pro V 65 LE
Diameter Ø 5 mm up to Ø 65 mm
Rod length 1.200 mm 1.500 mm
Spindle height 920 mm - 1.300 mm
Carrying capacity 250 kg 280 kg