Component catalogue 2013

(1)

www.helvar.com

Component catalogue 2013

Due to a policy of continuous improvement, Helvar reserve the right to alter specifications without notice at anytime.

Who are Helvar

Helvar is an international lighting technology company specialising in energy-efficient components and solutions for lighting and lighting control systems.

Our luminaire component portfolio consists of LED drivers, electronic and magnetic ballasts for fluorescent and high intensity discharge lamps as well as sensors complemented with an extensive range of lighting control products and systems.

C om po ne nt c ata lo gu e 20 13

Helvar has representatives all over the world.

For additional information, please visit www.helvar.com

REF C24 013 1A 17/04/2013 English

(2)

Head Office

Helvar Oy Ab

Yrittäjäntie 23 FI - 03600 Karkkila Finland

Tel: +358 9 5654 1

Finland

Helvar Oy Ab

Vetotie 3 FI-01610 Vantaa Tel: +358 9 5654 1

Italy

Helvar S.r.l.

Via W-Tobagi 26/1

IT - 20068 Peschiera Borromeo (MI) Italy

Tel: +39 02 55 30 10 33

Hungary

Helvar Kft.

Lomb u. 31/b.

HU-1139 Budapest Hungary

Tel: +36 1 2393 136

France

Helvar Bureau France

12 Allée Joséphine de Beauharnais FR-95320 Saint-Leu-la-Forêt France

Tel: +33 1 3418 1281

United Kingdom

Helvar Ltd

Hawley Mill Hawley Road Dartford Kent, DA2 7SY United Kingdom

Tel: +44 (0)1322 222211

Germany

Helvar GmbH

Philipp-Reis-Straße 4-8 DE-63150 Heusenstamm Germany

Tel: +49 (0) 6104 / 78075 - 0

Sweden

Helvar AB

Åsögatan 155 SE-11632 Stockholm Sweden

Tel: +46 (0) 8 545 239 70

Russia

Representative Office of Helvar Oy Ab

Sadovnicheskaya naberezhnaya 79 115035 Moscow

Russia

Tel: + 7 (495) 743-34-82

China

Helvar Lighting (Suzhou) Co., Ltd.

15F International Building, 2 Suzhou Avenue West, SIP, Suzhou, 215021

Tel: + 86 512 6763 3078

Helvar has representatives all over the world.

For additional information, please visit www.helvar.com

(3)

1

2

3

4 5 6

7

8

9

10 A

LED drivers and accessories

Dimmable constant current LED drivers 4

Non-dimmable constant current LED drivers 11 LED wiring & connectivity, dimensions 20

Accessories for Helvar LED drivers 24

Digital DALI controllable electronic ballasts

EL-iDim for T5-fluorescent lamps 28

EL-iDim for T8-fluorescent lamps 30

EL-iDim, EL-iDim-c for Compact fluorescent lamps 32

Wiring diagrams & technical characteristics 33

Switch-Control information 35

Analogue (1-10 V) controllable electronic ballasts

EL-sc for T5-fluorescent lamps 38

EL-sc for T8-fluorescent lamps 40

EL-sc for Compact fluorescent lamps 41

Switch-Control information 43

Standard electronic ballasts

EL-ngn5, EL-s, EL-su for T5-fluorescent lamps 46

EL-s, EL-su EL-ngn, EL-es for T8-fluorescent lamps 52

EL-ngn5, EL-s, EL-TCs for Compact fluorescent lamps 55

Electronic ballasts for HID-lamps

EP-h Electronic ballasts for HID-lamps 67

Ballasts for fluorescent T8 Lamps

230 V 50 Hz 72

240 V 50 Hz 74

220 V 50 Hz 75

Wiring diagrams, dimensions and delivery information 76

Ballasts for compact fluorescent lamps

230 V 50 Hz 77

240 V 50 Hz 80

Wiring diagrams, dimensions and delivery information 81

Ballasts & ignitors for HID-lamps

Ballasts for high pressure mercury lamps 84 Ballasts for high pressure sodium lamps 86 Power reduction ballasts for high pressure sodium 88

Ballasts for metal halide lamps 89

Ballasts for HID-lamps (220 V) 91

Wiring diagrams, dimensions and delivery information 92 Electronic superimposed pulse ignitors 94

General information and instructions for use

Electronic ballasts 98

Magnetic ballasts 100

Quantity of ballasts for MCB’s 102

Wire release instructions 108

EL-s wiring options 109

Lamp markings 110

Sensors

iDim Sense iDim Concept 112

Minisensor3 Minisensor 116

SL-PIR-SW, SL-PIR-AN SL-MW-SW,

SL-MW-AN, SL-MW-DAµDim sensors 117

MIMO2, MIMO3 MIMO2 Constant light sensor, MIMO3 sensor 123

140xxx TK4 1-10 V Ballast controller 125

Lamp ballast compatibility & approvals

126

(4)

freedom in lighting

2 Helvar | Data is subject to change without notice. More information at: www.helvar.com

LED DRIVERS

Helvar’s LED offering includes a range of Constant Current drivers including dimmable and non-

dimmable solutions. The LED drivers can be used for indoor and outdoor applications for spot lights, down lights, flood lights and linear strip lighting.

The Helvar LED range is designed for easy installation and long life. All drivers provide power with high efficiency. The

dimmable drivers ensure reliable and smooth dimming from 1 % - 100 %. Helvar’s LED drivers are complemented by a full and compatible range of Helvar controls and sensor solutions, suitable for both luminaire based (μDim, iDim, MIMO3) and networked applications (DIGIDIM Router).

OuTLOOk

Further exciting LED product developments are in the pipeline for 2013, showing Helvar’s continuous commitment to supporting luminaire manufacturers in making a successful transition to LED. Stay in tune with our website for continuous new LED products.

Home

(5)

3

LL6-U-CC - - - 7 11

LL20-U-CC - - - 20 12

LL1x20-E-DA - - - 20 4

LC1x30-E-CC - - - 30 13

LC1x30-E-AN - - - 30 6

LC1x30-E-DA - - - 30 5

LL1x40-E-CC - - - 40 14

LL1x40-E-DA - - - 40 7

LL2x35-E-CC - - - 2x35 16

LL2x35-E-DA - - - 2x35 9

LL1x70-E-CC - - - 70 15

LL1x70-E-DA - - - 70 8

OL1x60-E-CC - - - 63 17

OL1x100-E-CC1 - - - 105 18

OL1x100-E-CC2 - - - 101 19

LC50-U-DX3 - - - 50 10

Helvar | Data is subject to change without notice. More information at: www.helvar.com

Helvar’s LED drivers have been developed based on our expertise and knowledge of the key LED applications in the lighting market. Following look-up table provides an easy LED driver summary. The table links each LED driver to its typical application area. In addition it lists it control interface and maximum power rating. More detail can be found on the product pages.

To download the Helvar LEDesign calculator go to:

http://www.helvar.com/downloads/ledesign-standalone Driver type Switching 1 - 10 V DALI DMX Max.output Power

Page

Home

(6)

4

LL1x20-E-DA *

NL

Itot = 350 / 500 / 700 mA (+)

(-)

I1

I2

In

Ifv = I1 + I2 + ... + In

= 350 / 500 / 700 mA +/- 5%

DALI Switch-Control

1x20 W Dimmable DALI LED driver

Connections

20 W 220 - 240 V, 50 - 60 Hz

Mains Characteristics

Voltage range 198 - 264 VAC

DC range 176 - 280 VDC,

starting voltage > 190 VDC Max mains current at full load 0.09 - 0.12 A

Frequency 0 / 50 - 60 Hz

u-OuTmax (abnormal) 80 V Stand-by power 0.3 W

Load Output

Output current 350 / 500 / 700 mA Max output power 20 W

Efficiency, at full load, typical ≥ 0.86

I-OuT 350 mA 500 mA 700 mA

P-out (max) 20 W 20 W 19.6 W

u-OuT 10-57 V 10-40 V 10-28 V

λ 0.89c 0.92c 0.92c

η @ max 0.86 0.86 0.86

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h, at TC max

(90 % survival rate)

Connections and Mechanical Data

Wire size 0.5 - 1.5 mm²

Wire type solid core and fine-stranded

Maximum driver to LED wire length 5m

Weight 110 g

IP rating IP20

Conformity & Standards

General and safety requirements EN 61347-1 Particular safety requirements for d.c. or a.c. supplied

electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN61347, C5e Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 Immunity standard, acc. to EN 61547 Performance requirements, acc to EN 62384 Digital adressing lighting interface (DALI) ** EN62386-207

Compliant with relevant Eu directives ENEC, CE & SELV marked

** with additional extensions

Note: See page 22 for dimensions, (no. 2)

• Selectable constant current output: 350 / 500 / 700 mA

• Maximum 20 W load

• DALI control input, 1 %-100 % dimming range

• Low stand-by power 0.3 W

• Protected up to 4 kV power network fast transients

• High efficiency, ≥ 0.86

Alternative

parallel connection

Note: Not suitable for load side switching operation.

* Preliminary information. For availability please check with your sales representative

Home

(7)

5

LC1x30-E-DA

NL

NTC

DALI Switch-Control

(+) (-)

Ifv = 350 / 500 / 700 mA

I1

I2

In

I_fv I_fv = I₁+ I₂+ ... + I_n

= 350 / 500 / 700 mA +/- 5%

17.04.2013 1/1 Helvar | Data is subject to change without notice. More information at: www.helvar.com

1x30 W Dimmable DALI LED driver

Connections

• Selectable constant current output: 350 / 500 / 700 mA (custom currents on request)

• Maximum 30 W load

• DALI control input, 1 %-100 % dimming range

• Low stand-by power 0.3 W

• Protected up to 4 kV power network fast transients

• High efficiency, 0.86

• Optional click-on strain relief for independent use

• External NTC thermal input

• iDim compatible

30 W 220-240 VAC, 50-60 Hz

Mains Characteristics

starting voltage > 190 VDC Max mains current at full load 0.14-0.18 A

u-OuT_max (abnormal) 80 V Stand-by power 0.3 W

Load Output

Output current (I-OuT) 350 / 500 / 700 mA (custom output currents 245-700 mA on request) Max output power 30 W

I-OuT 350 mA 500 mA 700 mA

P-out (max) 21 W 30 W 30 W

u-OuT 10 - 60 V 10 - 60 V 10 - 43 V

λ 0.90c 0.94c 0.94c

η @ max 0.86 0.86 0.86

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C *

(* Independent use t_{a max} = +45 °C) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h, at TC max

Connections and Mechanical Data

Maximum driver to LED wire length 5m (1 m with NTC)

Weight 123 g

(+17 g, strain relief LC1x30-SR) Thermal sensor input Input for external

NTC thermal sensor

NTC trigger point 8.2 kΩ

IP rating IP20

Conformity & Standards

Note: See page 22 for dimensions, (no. 3 & 4)

Alternative

parallel connection

Home

(8)

6

LC1x30-E-AN

NL

NTC

(+) (-)

Ifv = 350 / 500 / 700 mA

I1

I₂ I_n

Ifv

I_fv = I₁+ I₂+ ... + I_n

= 350 / 500 / 700 mA +/- 5%

1-10 V

1x30 W Dimmable 1-10 V LED driver

Connections

• Selectable constant current output: 350 / 500 / 700 mA

• Maximum 30 W load

• 1-10 V control input, 1 %-100 % dimming range

• Protected up to 4 kV power network fast transients

• High efficiency, 0.86

• Optional click-on strain relief for independent use

• External NTc thermal input

• MIMO3 and μDim sensor compatible

30 W 220-240 VAC, 50-60 Hz

Mains Characteristics

Voltage range 198 - 264 VAc Dc range 176 - 280 VDc,

starting voltage > 190 VDc Max mains current at full load 0.14-0.18 A

Frequency 0 / 50 - 60 Hz u-OuT_max (abnormal) 80 V

Load Output

Output current (I-OuT) 350 / 500 / 700 mA Max output power 30 W

I-OuT 350 mA 500 mA 700 mA

P-out (max) 21 W 30 W 30 W

u-OuT 10 - 60 V 10 - 60 V 10 - 43 V

λ 0.90c 0.94c 0.94c

η @ max 0.86 0.86 0.86

Operating Conditions and Characteristics

Max.temperature at tc point 75 °c Ambient temperature range -20…+50 °c *

(* Independent use t_{a max} = +45 °c) Storage temperature range -40…+80 °c Maximum relative humidity no condensation Life time 50 000 h, at Tc max

Connections and Mechanical Data

Wire type solid core and fine-stranded Maximum driver to LED wire length 5m (1 m with NTc)

Weight 126 g

(+17 g, strain relief Lc1x30-SR) Thermal sensor input Input for external

NTc thermal sensor

NTc trigger point 8.2 kΩ

IP rating IP20

Conformity & Standards

electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN61347, c5e Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 Immunity standard, acc. to EN 61547 Performance requirements, acc to EN 62384

1-10 V control acc. to EN 60929

compliant with relevant Eu directives ENEc, cE & SELV marked

Note: See page 22 for dimensions, (no. 3 & 4) Alternative parallel connection

Home

(9)

7

LL1x40-E-DA *

LN DALI Switch-Control

NTC R

I1 I2 In

Ifv = I1 + I2 + ... + In Ifv = 350 - 1050 mA

1x40 W Dimmable DALI LED driver

Connections

• Adjustable constant current output: 350 mA (default) - 1050 mA

• DALI control input 1 % - 100 % dimming range

• Low standby power 0.4 W

• Protected up to 4 kV power network fast transients

• High efficiency, 0.89

• Overload, open & short circuit protection

• Suitable for Class I, II or SELV luminaire

• External NTC thermal input

• Current setting resistor input

• Optional click-on strain relief for independent use

Mains Characteristics

Load Output

Output current (I-OuT) 350 mA (default) - 1050 mA Max output power 40 W

I-OUT 350 mA 1050 mA

P-out (max) 28 W 40 W U-OUT 20 - 80 V 20 - 38 V

λ 0.95 0.97

η @ max 0.89 0.86

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C * Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h, at TC max

Connections and Mechanical Data

Weight 150 g

(+10 g, strain relief LL1x40-SR) Thermal sensor input Input for external

NTC thermal sensor

IP rating IP20

Conformity & Standards

* with additional extensions

Alternative parallel connection

Current setting (p.21) Resistor R output I_fv

open 350 mA

3.9 kΩ 500 mA 1.0 kΩ 700 mA

0 Ω 1050 mA

40 W 220-240 VAC, 50-60 Hz

Home

(10)

8

LL1x70-E-DA

Ifv = 350 - 700 mA NL

DA

R Switch-Control

1x70 W Dimmable DALI LED driver

Connections

• Adjustable constant current output: 350 mA (default) - 700 mA

• Dali control input 1 %-100 % dimming range

• Low standby power 0,4 W

• Protected up to 4 kV power network fast transients

• Overload, short & open circuit protection

• Accept DC mains in case of central emergency battery

• High efficiency, > 0.91

• Suitable for class I luminaires

• Current setting resistor input

70 W 220-240 VAC 50-60 Hz

Mains Characteristics

starting voltage > 195 VDC Max mains current at full load 0.33- 0.42 A

Load Output

Efficiency, at full load, typical ≥ 0.91 I-OuT 350 mA 700 mA P-out (max) 70 W 70 W

u-OuT 50 - 200 V 50 - 100 V

λ 0.98 0.98

η @ max 0.91 0.91

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C * Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h, at TC max

Connections and Mechanical Data

Maximum driver to LED wire length 5 m

Weight 242 g

IP rating IP20

Conformity & Standards

electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN61347, C5e Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 Immunity standard, acc. to EN 61547 Performance requirements, acc to EN 62384 Digital adressing lighting interface (DALI) *

EN62386-207

Compliant with relevant Eu directives ENEC & CE marked

* with additional extensions

Current setting (p. 21) Resistor R output I_fv

open 350mA

8.2 kΩ 500mA

0 Ω 700mA

Note:

• Not suitable for load side switching operation.

• Driver output and current setting circuit are not isolated from mains

Home

(11)

9

LL2x35-E-DA *

Ifv = 350 - 700 mA NL

DA ^R

Switch-Control NTC

2x35 W Dimmable DALI LED driver

Connections

• Adjustable constant current output: 350 mA (default) - 700 mA

• Two independent SELV rated output channels

• DALI control input 1 % - 100 % dimming range

• Low standby power 0,5 W

• Protected up to 4kV power network fast transients

• High efficiency, 0.9

• Overload, open & short circuit protection

• Suitable for Class I or II luminaire

• External NTC thermal input

• Current setting resistor input

2x35 W 220-240 VAC 50-60 Hz

Mains Characteristics

Load Output

Output current (I-OuT) 350 mA (default) - 700 mA Max output power 35 W / channel

Efficiency, at full load, typical 0.9

I-OuT 350 mA 700 mA P-out (max) / channel 35 W / ch 35 W / ch

u-OuT 25-100 V 25-50 V λ (both channels loaded) 0.98 0.98 η (both ch loaded @ max) 0.9 0.87

Operating Conditions and Characteristics

Max.temperature at tc point 80 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h, at TC max

Connections and Mechanical Data

Weight 365 g

IP rating IP20

Conformity & Standards

Compliant with relevant Eu directives ENEC,CE & SELV marked

open 350mA

0 Ω 700mA

Note:

• Wrong wiring will serious damage the product

• PE needs not to be connected in class II luminaires if they are suitably designed

Home

(12)

10

LC50-U-DX3

NTC

N L NTC

DMX in DMX in (+)

DMX in (-) DMX in (shield)

L N Ch1

Ch2 Ch3

(+) (-) (+) (-)

(+) (-)

GND (-) (+) (+) (-) (shield)

3 channel DMX LED driver 50 W

Connections

• Max. total output power 50 W

• Smooth dimming range 0.1 % - 100 %

• Default output current 350 mA

• Programmable output current (350 – 1050 mA)

• Programmable DMX512 start address

• Optional DMX programming dongle (LC50-PR)

• High efficiency, 0.89 (at full load, 230 VAC)

• High power factor > 0.97c (at full load, 230 VAC)

50 W 120 - 250 V, 50-60 Hz

Mains Characteristics

Max mains current at full load 0.30 - 0.60 A

Frequency 50 / 60 Hz

u-OuT_max (abnormal) 60 V

Load Output

Output current (default) 350 mA Output current range (programmable) 350-1050 mA

Max. total output power 50 W Max. individual channel power 50 W Efficiency, at full load, typical 0.89

I-OuT 350 mA 350 - 1050 mA P-out (max) 50 W 50 W

u-OuT 10 - 55 V 10 - 55 V λ > 0.9c > 0.9c

η @ max 0.89 0.89

Operating Conditions and Characteristics

Max.temperature at tc point 85 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation

Life time 30 000 h, at tc max.

Connections and Mechanical Data

Weight 350 g

IP rating 20

Conformity & Standards

electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN 61347, C5e Mains current harmonics, acc. to EN 61000-3-2 Radio Frequency Interference, acc. to EN 55015 Immunity standard, acc. to EN 61547 Performance requirements, acc to EN 62384

Compliant with relevant Eu directives CE, uL pending, VDE & ENEC pending, SELV

Optional

uSB to DMX programming dongle LC50-PR

Note: See page 22 for dimensions, (no. 5) Note: Not suitable for load side switching operation.

Home

(13)

11

LL6-U-CC

Itot = 350 / 700 mA L N

(+) (-)

I1

I2

In

Ifv

Ifv = I1 + I2 + ... + In

= 350 / 700 mA +/- 5%

1x6 W Constant Current LED driver

Connections

• Selectable constant current output: 350 / 700 mA

• universal supply voltage range

• Short circuit protection

• Protected up to 4 kV power network fast transients

• High efficiency, 0.80

• Linear enclosure with strain relief for independent use

• Accepts DC mains in case of central emergency battery

6 W 100 - 240 V, 50 - 60 Hz

Mains Characteristics

100 - 264 VDC Max mains current at full load 50 mA (at 240 VAC)

140 mA (at 100 VAC)

Maximum circuit power 9 W u-OuT_max (abnormal) 25 V

Load Output

Output current 350 / 700 mA

Max output power 7.0 W

I-OuT 350 mA 700 mA P-out (max) 5.6 W 7.0 W

u-OuT 7…16 7…10

λ 82 85

η @ max 80 80

Operating Conditions and Characteristics

Life time 50 000h, at tc max

Connections and Mechanical Data

Weight 65 g

IP rating 20

Conformity & Standards

electronic controlgear for LED modules, acc. to EN 61347-2-13 Thermal protection class EN61347, C5e Mains current harmonics, acc. to EN 61000-3-2 Limits for Voltage Fluctuations and Flicker, acc to EN 61000-3-3 Radio Frequency Interference, acc. to EN 55015 Immunity standard, acc. to EN 61547 Performance requirements, acc to EN 62384

Note: See page 22 for dimensions, (no. 1) Alternative parallel connection

Home

(14)

12

LL20-U-CC

LN

Itot = 350 / 700 mA (+)

(-)

I1

I2

In

Ifv = I1 + I2 + ... + In

= 350 / 700 mA +/- 5%

2 A max

1x20 W Constant Current LED driver

Connections

20 W 100 - 240 V, 50 - 60 Hz

Mains Characteristics

100 - 264 VDC Max mains current at full load 100 mA (at 240 VAC)

230 mA (at 100 VAC)

Maximum circuit power 23 W u-OuT_max(abnormal) 50 V

Load Output

Output current 350 / 700 mA

Max output power 20 W

I-OuT 350 mA 700 mA P-out (max) 15 W 20.3 W

u-OuT 12…43 12…29

λ 86 87

η @ max 85 86

Operating Conditions and Characteristics

Life time 50 000h, at TC max

Connections and Mechanical Data

Maximum driver to LED wire length 5m

Weight 110 g

IP rating 20

Conformity & Standards

Note: See page 22 for dimensions (no.2)

• Selectable constant current output: 350 / 700 mA

• universal supply voltage range

• Short circuit protection

• Protected up to 4 kV power network fast transients

• High efficiency, 0.86

• Linear enclosure with strain relief for independent use

• Accepts DC mains in case of central emergency battery

Supply Voltage Chaining* (only LL20-u-CC)

* max number of converters depends on supply voltage and load (7 pcs. max at full load)

Alternative

parallel connection Home

(15)

13

LC1x30-E-CC

NL

NTC

(+) (-)

Ifv = 350 / 500 / 700 mA

I1

I2

In

I_fv I_fv = I₁+ I₂+ ... + I_n

= 350 / 500 / 700 mA +/- 5%

1x30 W Constant Current LED driver

Connections

• Selectable constant current output: 350 / 500 / 700 mA (fixed)

• Maximum 30 W load

• Short circuit protection

• High efficiency, 0.86

• Optional click-on strain relief for independent use

• External NTC thermal input

• Protected up to 4 kV power network fast transients

30 W 220-240 VAC, 50-60 Hz

Mains Characteristics

starting voltage > 190 VDC Max mains current at full load0.14-0.18 A

Load Output

I-OuT 350 mA 500 mA 700 mA

P-out (max) 21 W 30 W 30 W

u-OuT 10 - 60 V 10 - 60 V 10 - 43 V

λ 0.93c 0.96 0.96

η @ max 0.86 0.86 0.86

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C *

(* Independent use t_{a max} = +45 °C) Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000h, at TC max

Connections and Mechanical Data

Weight 115 g

(+17 g, strain relief LC1x30-SR) Thermal sensor input Input for external

NTC thermal sensor

IP rating IP20

Conformity & Standards

Note: See page 22 for dimensions (no. 3 & 4) Alternative parallel connection

Home

(16)

14

LL1x40-E-CC *

NL

NTC R

I1 I2 In

Ifv = I1 + I2 + ... + In Ifv = 350 - 1050 mA

1x40 W Constant Current LED driver

• Adjustable constant current output: 350 mA (default) - 1050 mA

• Protected up to 4kV power network fast transients

• High efficiency, 0.89

• Overload, open & short circuit protection

• Suitable for Class I, II or SELV luminaire

• External NTC thermal input

• Current setting resistor input

40 W 220-240 VAC 50-60 Hz

Connections

Mains Characteristics

Load Output

u-OuT 20 - 80 V 20 - 38 V

λ 0.95 0.97

η @ max 0.89 0.86

Operating Conditions and Characteristics

Connections and Mechanical Data

Weight 150 g

(+17 g, strain relief LL1x40-SR) Thermal sensor input Input for external

NTC thermal sensor

IP rating IP20

Conformity & Standards

Note: See page 22 for dimensions, (no.6)

Current setting (p.21) Resistor R output I_fv

open 350 mA

3.9 kΩ 500 mA 1.0 kΩ 700 mA

0 Ω 1050 mA

Home

(17)

15

LL1x70-E-CC

NL

Ifv = 350 - 700 mA

R

1x70 W Constant Current LED driver

Connections

• Overload, short & open circuit protection

• Suitable for class I luminaires

• Adjustable constant current output: 350 (default) to 700 mA

• Maximum 70 W load

• Accept DC mains in case of central emergency battery

• High efficiency > 0.91

• Protected up to 4 kV power network fast transients

• Suitable for Class I luminaires

• Current setting resistor input

70 W 220-240 VAC 50-60 Hz

Mains Characteristics

starting voltage > 195 VDC Max mains current at full load 0.32 - 0.41 A

Load Output

Output current (I-OuT) 350 (default) to 700 mA Max output power 70 W

Efficiency, at full load, typical > 0.91 I-OuT 350 mA 700 mA P-out (max) 70 W 70 W

u-OuT 50 - 200 V 50 - 100 V

λ 0.98 0.98

η @ max 0.91 0.89

Operating Conditions and Characteristics

Max.temperature at tc point 75 °C Ambient temperature range -20…+50 °C Storage temperature range -40…+80 °C Maximum relative humidity no condensation Life time 50 000 h, at TC max

Connections and Mechanical Data

Weight 227 g

IP rating IP20

Conformity & Standards

Note:

Not suitable for load side switching operation.

Driver output and current setting circuit are not isolated from mains

Note: See page 23 for dimensions (no.7)

open 350mA

8.2 kΩ 500mA

0 Ω 700mA

Home

(18)

16

LL2x35-E-CC *

Ifv = 350 - 700 mA NL

R

NTC

2x35 W Constant Current LED driver

Connections

• Adjustable constant current output: 350 mA (default) - 700 mA

• Two independent SELV rated output channels

• Protected up to 4 kV power network fast transients

• High efficiency ≥ 0.91

• overload open & short circuit protection

• Suitable for Class I or II luminaire

• External NTC thermal input

• Current setting resistor input

2x35 W 220-240 VAC, 50-60 Hz

Mains Characteristics

Load Output

Output current (I-OuT) 350 mA (default) - 700 mA Max output power 35 W / channel

I-OuT 350 mA 700 mA P-out (max) / channel 35 W / ch 35 W / ch

u-OuT 25-100 V 25-50 V λ (both channels loaded) 0.98 0.98 η (both ch loaded @ max) 0.91 0.88

Operating Conditions and Characteristics

Connections and Mechanical Data

Weight 365 g

IP rating IP20

Conformity & Standards

Compliant with relevant Eu directives ENEC,CE & SELV marked

* Preliminary information. For availability please check with your sales representative.

open 350mA

0 Ω 700mA

Note:

• Wrong wiring will serious damage the product

• PE needs not to be connected in class II luminaires if they are suitably designed

Home

(19)

17

OL1x60-E-CC

NL E

Itot = 350 / 700 / 1400 mA (+)

(-)

I1

I2

In

Ifv

Ifv = I1 + I2 + ... + In

= 350 / 700 / 1400 mA +/- 5%

17

1x60 W Constant Current LED driver

Connections

• Selectable constant current output: 350 / 700 / 1400 mA

• Maximum 63 W load

• Short circuit protection

• Open circuit protection

• Protected up to 4 kV power network fast transients

• High efficiency > 0.90

• Suitable for outdoor use IP65

• Double insulated enclosure

60 W 220-240 VAC, 50-60 Hz

Mains Characteristics

Voltage range 198 - 264 VAC Max mains current at full load 0.25 - 0.34 A

Frequency 50 - 60 Hz

Load Output

I-OuT 350 mA 700 mA 1400 mA

P-out (max) 31.5 W 63 W 58.8 W

u-OuT 60 - 90 V 35 - 90 V 35 - 42 V

λ 0.94c 0.97 0.98

η @ max 0.86 0.9 0.9

Operating Conditions and Characteristics

Max.temperature at tc point 85 °C Ambient temperature range -30…+60 °C Storage temperature range -40…+80 °C Maximum relative humidity 100 %

Life time: 50 000 h, at 75 °C TC 30 000 h, at 85 °C TC (90 % survival rate)

Connections and Mechanical Data

Connection wires length 0.3 m Maximum driver to LED wire length 5 m

Weight 490 g

IP rating IP65

Conformity & Standards

Note: See page 23 for dimensions(no. 9) Alternative parallel connection

Home

(20)

18

OL1x100-E-CC1

LN E

Itot = 700 / 1050 mA (+)

(-)

I1

I2

In

Ifv

Ifv = I1 + I2 + ... + In

= 700 / 1050 mA +/- 5%

18

1x100 W Constant Current LED driver

Connections

• Selectable constant current output: 700 / 1050 mA

• Maximum 105 W load

• Short circuit protection

• Open circuit protection

• Protected up to 4 kV power network fast transients

• High efficiency > 0.91

• Suitable for outdoor use IP65

• Double insulated enclosure

100 W 220-240 VAC, 50-60 Hz

Mains Characteristics

Load Output

Output current (I-OuT) 700 / 1050 mA Max output power 105 W Efficiency, at full load, typical ≥ 0.91

I-OuT 700 mA 1050 mA P-out (max) 84 W 105 W

u-OuT 70 - 120 V 70 - 100 V

λ 0.98 0.98

η @ max 0.91 0.91

Operating Conditions and Characteristics

Connections and Mechanical Data

Connection wires length 0.3 m

Weight 750 g

IP rating IP65

Conformity & Standards

Note: See page 22 for dimensions (no. 10) Alternative parallel connection

Home

(21)

19

OL1x100-E-CC2

LN E

Itot = 1400 / 2100 mA (+)

(-)

I1

I2

In

Ifv

Ifv = I1 + I2 + ... + In

= 1400 / 2100 mA +/- 5%

18

1x100 W Constant Current LED driver

Connections

• Selectable constant current output: 1400 / 2100 mA

• Maximum 101 W load

• Short circuit protection

• Open circuit protection

• Protected up to 4 kV power network fast transients

• High efficiency > 0.91

• Suitable for outdoor use IP65

• Double insulated enclosure

100 W 220-240 VAC, 50-60 Hz

Mains Characteristics

Load Output

Output current (I-OuT) 1400 / 2100 mA Max output power 101 W

u-OuT 30 - 72 V 30 - 48 V

λ 0.98 0.98

η @ max 0.91 0.90

Operating Conditions and Characteristics

Connections and Mechanical Data

Connection wires length 0.3 m

Weight 750 g

IP rating IP65

Conformity & Standards

Note: See page 22 for dimensions (no. 10) Alternative parallel connection

Home

(22)

20

LED

LN Switch-Control

LED wiring & connectivity

Helvar have a range of LED drivers suited for either in-built and independent luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED drivers from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Specifications of the LED drivers may never exceed the operating conditions as per the product datasheets.

Wiring considerations

Wire type and cross section

• Please refer to datasheets connections & mechanical data

Wiring insulation

• According to recommendations in EN 60598 Maximum wire lengths

• Please refer to datasheets connections & mechanical data

Wire connections

• Please refer to datasheets connections diagram

Miniature Circuit Breakers (MCB)

• Type-C MCB’s with trip characteristics in according to EN 60898 are recommended. Please refer to page 102 for the exact maximum number of LED drivers per MCB.

LED driver earthing

• LED drivers are designed to support different luminaire classifications, like Class I or Class II fittings (no earth required).

Please check the individual LED driver type for its exact safety class rating.

• For Helvar LED drivers to have a reliable operation and EMC performance, the luminaires are expected to have an earth connection.

• When using a SELV-rated LED driver, then the SELV driver output has to be insulated from the luminaire earth connection (ref.

EN60598-1 luminaire standard).

Installation & operational considerations

Maximum tc temperature

• Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use.

Strain Relief for independent use

• Some of the Helvar LED drivers allow use both inside the luminaire and outside the luminaire, via a strain relief. The strain relief provides reliable fastening method for the mains and LED output wiring.

• Ensure that the LED driver does not exceed temperature higher than specified on the product datasheets.

• The general preferred installation position of LED drivers is to have the top cover facing upwards.

Switch-Control

• The Helvar DALI dimmable LED drivers feature Switch-Control.

This feature provides basic On/Off and up/Down dimming functionality through a standard momentary switch.

• Switch-Control and DALI controls may not be connected simultaneously.

• For more accurate Switch-Control operational information please refer to page 35 (EB section)

T22 015 1A 17.04.2013 1/2

Home

(23)

21

LL1x70- & LL2x35-

R (Ω) 0 1k 1k2 1k5 1k8 2k2 2k7 3k3 3k9 4k7 5k6 6k8 8k2 10k 12k 15k 22k 27k 33k 39k 47k 56k 68k 82k 100k 150k 330k 1M ∞ I_out

(mA) 700 650 640 630 620 610 600 580 570 550 530 520 500 480 470 450 430 420 410 400 390 385 380 375 370 365 360 355 350

Current setting resistor

The Helvar LL1x40, LL1x70 and LL2x35 driver platforms feature an adjustable constant current output.

• An external resistor can be inserted in to the current setting terminal, allowing the user to adjust the LED driver output current.

• When no external resistor is connected, then the LED drivers will operate at their default lowest current level.

• A standard through-hole resistor can be used for the current setting. To achieve the most accurate output current it is recommended to select a quality low tolerance resistor.

• When bending the external resistor, then please handle carefully to avoid damaging the component (see picture right).

• For the resistor / current value selection, please refer to the enclosed tables below.

T22 015 1A 17.04.2013 2/2

Home

(24)

22

2 1

5

6 3 4

106

57.567

10393.5

127

57.5

4.2

130 30

119

76 66.5

175

184 165

4025.2 4.4

118 100 110

4021.2 4.4

184 225

36.5

168

46.528 36.5

Dimensions

With strain relief (LL1x40-SR)

T22 014 1A 17.04.2013 1/2

Home

(25)

23

7

8

9

10

1 LL6-u-CC

2 LL20-u-CC, LL1x20-E-DA

3 LC1x30-E-CC, LC1x30-E-DA, LC1x30-E-AN

4 LC1x30-E-CC, LC1x30-E-DA, LC1x30-E-AN (+ LC1x30-SR) 5 LC50-u-DX3

6 LL1x40-E-CC, LL1x40-E-DA (+ LL1x40-SR) 7 LL1x70-E-CC, LL1x70-E-DA

8 LL2x35-E-CC, LL2x35-E-DA 9 OL1x60-E-CC

10 OL1x100-E-CC1, OL1x100-E-CC2 210

234 220

300 ± 20 300 ± 20

53

35 137

125

300 ± 20 300 ± 20

149

53

35 380

370

3521

Helvar | Data is subject to change without notice. More information at: www.helvar.com T22 014 1A 17.04.2013 2/2

Home

(26)

24

LED

LED driver accessories

LC1x30-SR

• Easy to assemble click-on strain relief for LC1x30 series

• Allows independent driver usage

• Screws for internal cable clamps included

• Cable clamps allowing different cable thicknesses

LL1x40-SR

• Easy to assemble click-on strain relief for LL1x40 series

• Allows independent driver usage

• Screws for internal cable clamps included

• Cable clamps allowing different cable thicknesses

• Each pack includes 2 x strain reliefs

LC50-PR

• uSB to DMX programming dongle for the LC50-u-DX3

• Configuring the LED driver parameters

• Setting the LED driver DMX start address

• Helvar DMX LED configurator Software downloadable from:

www.helvar.com/downloads/tools

For more information please see Technical note LED-TN-005 “LC50-u-DX3 Operational & Configuration information”

Home

(27)

Home

(28)

freedom in lighting

One of the first companies to develop and manufacture electronic ballasts, Helvar’s history in these products extends back to the early 1980s.

Since that time, Helvar has remained at the forefront, offering a comprehensive range of innovative electronic ballasts covering all relevant applications with T5, T8 and compact fluorescent lamps. The tables below show lamp categories where ballast combinations are found.

ELECTRONIC BALLASTS

PAGE

For T5 lamps For T8 lamps For c ompact lamps For HID lamps

DIGITAL DALI ELECTRONIC BALLASTS

EL-iDim 28 30 31 -

EL-iDim-c 32 - 32 -

ANALOGuE CONTROLLABLE ELECTRONIC BALLASTS

EL-sc 38 40 41 -

STANDARD ELECTRONIC BALLASTS

EL-s 48 53 61 -

EL-su 50 53 61 -

EL-ngn - 52 - -

EL-ngn5 46 - 55 -

EL-es - 54 - -

EL-TCs 57 57 55 -

EP-h - - - 66

Home

(29)

EL-iDim / EL-iDim-c DALI ballasts are designed for a broad range of applications from the smallest intelligent luminaires to major lighting installations in large building complexes. What’s more, they offer the important advantage of enabling everything to be achieved with the same ballasts. EL-iDim / EL-iDim-c DALI ballasts are also fully compatible with Helvar iDim sensors, the combination creating the latest high-tech innovation available to the lighting market. With out-of-box functionality, the Helvar system is moreover, easy to install and use, and maintenance costs are always kept to a minimum.

In the design of EL-iDim / EL-iDim-c, customer input played a crucial role – leading to superior features such as:

OCC

^TM

-

OPTIMuM CATHODE CONTROL

The proven OCC

^TM

- Optimum Cathode Control technol- ogy used in Helvar EL-s, EL-sc, EL-iDim and EL-TCs electronic ballast ranges.

OCC

^TM

ensures that the electrical parameters supplied to the lamp are always optimum, minimising system losses and maximising lamp lifetime. The achieved en- ergy saving is considerable compared to existing bal- lasts on the market.

DALI ELECTRONIC BALLASTS

• OCC technology, guaranteeing the highest possible:

EEI = A1 BAT

• Remarkable low stand-by power

• Smooth and stepless dimming from 100 % to 1 %

• Multi-lamp operation, allowing one ballast to drive all HE-T5 lamps

• Multi-lamp operation between several compact lamps

• EL-iDim-c ballast are suitable for use both in single and twin lamp operation

• The ballasts also have an in-built data register capable of storing information on running hours, energy consumption, mains voltage, lamp voltage etc. This can be very useful in large installations where the lighting management and maintenance is centralized in one monitoring room.

Home

(30)

28

EL-iDim

a

d d

b c T5

A1 BAT

Digital DALI electronic ballasts for T5 fluorescent lamps

Lamp type

Wattage No. of lamps

Ballast EEI Dimensions Connection Weight Circuit

power

Mains current

Lamp power

(p.33) (g) (W) (A) (W)

14 1 EL1x14-35iDim A1 BAT 1 1 250 17 0.08-0.07 13.7

14 2 EL2x14-35iDim A1 BAT 2 2 330 32.5 0.15-0.14 13.7

14 3 EL3x14iDim A1 BAT 2 3 310 47.5 0.22-0.20 13.7

14 4 EL4x14iDim A1 BAT 2 4 330 62 0.29-0.27 13.7

21 1 EL1x14-35iDim A1 BAT 1 1 250 23.5 0.11-0.10 20.7

21 2 EL2x14-35iDim A1 BAT 2 2 330 46 0.22-0.20 20.7

24 1 EL1x24iDim A1 BAT 1 1 250 25.5 0.12-0.10 22.5

24 2 EL2x24iDim A1 BAT 2 2 330 50.5 0.23-0.21 22.5

28 1 EL1x14-35iDim A1 BAT 1 1 250 32 0.15-0.14 27.8

28 2 EL2x14-35iDim A1 BAT 2 2 330 62 0.28-0.26 27.8

35 1 EL1x14-35iDim A1 BAT 1 1 250 39 0.18-0.17 34.7

35 2 EL2x14-35iDim A1 BAT 2 2 330 73.5 0.36-0.30 34.7

39 1 EL1x39iDim A1 BAT 1 1 250 42.5 0.20-0.18 38

39 2 EL2x39iDim A1 BAT 2 2 330 82.5 0.38-0.35 38

49 1 EL1x49iDim A1 BAT 1 1 250 55 0.25-0.23 49.3

49 2 EL2x49iDim A1 BAT 2 2 330 107.5 0.49-0.45 49.3

54 1 EL1x54iDim A1 BAT 1 1 250 59 0.27-0.25 53.8

54 2 EL2x54iDim A1 BAT 2 2 330 117 0.53-0.49 53.8

80 1 EL1x80iDim A1 BAT 1 1 250 86 0.39-0.36 80

80 2 EL2x80iDim A1 BAT 2 2 365 170 0.78-0.70 80

Note: See pages 33- 35 for connection diagrams and additional characteristics.

* Dimming range 3-100 % for EL3x14iDim & EL4x14iDim

• Digital DALI control

• Switch-Control

• Stand-by consumption 0.3 W

• Dimming range 1-100 % *)

• Only 21 mm high

• Microprocessor controlled

• Standard & sidemount possibilities

• user friendly, quick release connectors

Delivery information

Ballast unit package Transportation package Minimum

delivery amount

Plastic binding strip

EuR pallet 1200 x 800

Pallet weight

Pallet height

(pcs.) (kg) (cm)

EL1 x iDim 10 980 300 40

EL2 x iDim 10 840 325 43

EL3 x iDim 10 840 325 43

EL4 x iDim 10 840 325 43

T07 111 1F 26.03.2013 1/2 Right to use German patent DE19757295 of Tridonic Atco

14-80 W 220-240 V, 50-60 Hz

Dimensions 1 2 Length 'a' (mm) 360 430

Width 'b' (mm) 30 30 Height 'c' (mm) 21 21 'd' (mm) 350 420

Home