FALL 07-08 COMP100 MIDTERM-2 EXAM /FACULTY OF ECON. AND ADMINISTRATIVE SCIENCES OF EUL Student Registration No:___________________________________ Instructor: Prof.Dr.Hüseyin Oğuz
Student Name-Surname:___________________________________ Dept. of Computer Information Systems Date: 15.12.2007/14:00-16:00(Surname:J-Z)/AS209
1) Which input/output bus is used by new PCs and Macs? 1) _______ A) AGP B) Rambus C) PCI D) PDQ
2) What is the name of the temporary microprocessor storage locations used by the control unit?
2) _______ A) Apartments B) Registers
C) Accumulators D) Receptacles
3) An electronically identified interface for getting information into and out of a computer is called a(n):
3) _______ A) interface. B) port.
C) expansion card. D) bay.
4) How many peripheral devices can be connected to a single SCSI port? 4) _______ A) 8 B) 32 C) 1 D) 100
5) Universal Serial Bus ports: 5) _______
A) will probably be replaced by serial port technology. B) can accommodate any number of devices.
C) allow you to connect and disconnect devices without shutting down your computer.
D) do not allow hot swapping.
6) FireWire 6) _______
A) is used primarily for peripherals that do not need any high-speed data transmission.
B) is similar to USB except that it does not support plug and play. C) offers high-speed connections for up to 63 devices.
D) was originally created for non-Apple systems.
7) Since a computer uses direct current (DC) and wall outlets use alternating current (AC), a(n) ________ is needed to convert the current.
7) _____________
8) The _________ character code is the most widely used code on IBM mainframe computers.
8) _____________
9) The amount of room that a system unit needs to fit on the desk is called the _________.
9) _____________
10) A superscalar CPU: 10) ______
A) can execute more than one instruction per clock cycle. B) can execute thousands of instructions per clock tick. C) does not depend on pipelining to increase microprocessor
performance.
D) is still in the testing stage and not available to the general public.
11) The ________ step in the machine cycle interprets what action the program is telling the computer to perform.
11) _____________
12) The _________ of a data bus determines how many bits can be transferred simultaneously.
12) _____________
13) A(n) ________ is used to connect a sound card or a modem card into a computer system.
13) _____________
14) The _________ is the large printed circuit board that holds the computer's important components such as the microprocessor.
14) _____________
15) Notebook computers use _________ in order to use modems, networking, and other functions.
15) _____________
16) When text moves down to the next line in a document automatically, it is called:
16) ______ A) word wrap. B) word placement.
C) moving text. D) formatting text.
17) A purple dotted underline beneath text indicates a: 17) ______ A) Smart Tag. B) spelling error.
C) formatting error. D) grammar error.
18) A wavy ________ underline beneath a word indicates that the word is not in Microsoft's main dictionary.
18) ______ A) orange B) red C) green D) purple
19) Before printing a document, you should ________ it to make sure it looks exactly how you want it to look.
19) _____________
20) What characters are allowed in filenames? 20) ______
A) Text B) Numbers
C) Spaces D) All of these choices
21) By default, Word saves documents in the ________ on the hard drive. 21) ______ A) My Computer folder B) My Documents folder
C) user's folder D) My Network Place
22) Which window allows the user to search for and select clip art? 22) ______ A) Clip Art task pane B) Clip Art Search box
C) Insert Graphics D) Insert Graphics dialog box
23) When combining text with an image, you can have text appear: 23) ______ A) wrap tightly around the outer edges.
B) wrap above or below the image. C) on top of or behind an image. D) all of the above.
24) If you wish to apply a border line style to a text box or image, display the Picture toolbar and click:
24) ______ A) Borders and Lines. B) Line style.
C) Options. D) Border style.
25) To correct a spelling error, ________ on the word. 25) _____________
26) If you wish to insert an image from a scanner or camera, which option should you choose from the dialog box?
26) ______ A) Choose the resolution
B) Choose the options for inserting C) Choose the device
D) All of the above
27) The WordArt toolbar allows the user to: 27) ______ A) choose a different shape.
B) select a different style from the gallery. C) rotate an object.
D) all of these
28) If you wish to convert a document to a Web page, you should display it in:
28) ______ A) the Web Layout View. B) colored format.
C) a browser. D) a 600 X 480 resolution.
29) ________ shape(s) text into designs. 29) ______ A) Clip art B) WordArt
C) Text boxes D) Borders and Shading 30) If you wish to draw attention to text in a document, insert a ________ so
you can set the size, wrapping, style, and horizontal alignment.
30) ______ A) graphic B) text box
C) Word Art object D) clip art object
31) The ________ option wraps text around the edge of the image itself, contouring around the image, instead of the square boundary of the image.
31) ______
A) word wrap B) tight wrap C) text alignment D) text box
32) Where will an image be inserted in a document? 32) ______ A) After the last word of text
B) Where there is room available C) In a defined table
33) ________ refers to the way text wraps around an image. 33) ______ A) Text box B) Word wrap
C) Text wrapping D) Wrapping style
34) If you wish to make changes to a Web page saved in Word, open up ________ to make the revisions.
34) _____________
35) The address of the active cell is displayed in the ________ box. 35) ______ A) address B) name C) formula D) dialog
36) A(n) ________ box enables a user to input data or specify settings. 36) ______ A) tab B) active C) dialog D) option
37) If the Picture toolbar does not appear, you can display it by choosing View, Toolbars, ________.
37) ______ A) Borders and Shading B) Pictures
C) Clip art D) Graphics
38) If you wish to adjust the size of a picture, use the ________ to assist you. 38) ______ A) Picture size box B) Picture dialog box
C) sizing handles D) arrows
39) Which of the following is a VALID cell address in Excel? 39) ______ A) 89X B) 5XI C) AZ41 D) Z5A
40) To insert a clip from the Microsoft Clip Organizer into a document, click the arrow on the right side of an image and choose ________ from the shortcut menu.
40) ______
A) Cut B) Insert C) Move D) Copy
41) After assigning a name to a workbook, the new name will appear in the: 41) ______ A) title bar. B) status bar.
C) name box. D) address bar.
42) A specific cell can be identified or referenced by its: 42) ______ A) color. B) assigned number.
C) cell address. D) border.
43) You must use the ________ command sequence to save a previously named workbook with a different name.
43) ______ A) Save, Modify B) Save, File
C) File, Save D) File, Save As
44) If you click on cell B8 and it contains a formula, the ________ will be displayed in the active cell.
44) ______ A) value calculated by the formula
B) contents of the cells referenced by the formula C) formula itself
45) If the text entered into cell F4 exceeds the width of the cell, the excess text will be displayed in cell ________ as long as that cell is blank.
45) ______ A) G5 B) F3 C) E4 D) G4
46) Which of the following is an example of a label? 46) ______
A) 50 B) =A1*A3
C) =A5 D) Gross Pay
47) Press the ________ key to erase a character to the right of the insertion point.
47) ______
A) Insert B) Delete
C) Backspace D) Left arrow
48) To view another worksheet within the same workbook: 48) ______ A) double-click the tab at the bottom of the workbook containing the
name of the desired worksheet.
B) select File from the menu bar and then select the appropriate worksheet name from the listing at the bottom of the File menu. C) click the tab at the bottom of the workbook containing the name of
the desired worksheet.
D) select the File, Open command sequence from the menu bar.
49) When data is sorted in ________ order, the data is arranged in order from lowest to highest.
49) _____________
50) A flashing ________ indicates that you are in edit mode. 50) _____________
51) Sorting data refers to: 51) ______
A) limiting the data displayed to only the data meeting a specific condition.
B) switching the order of the columns displayed in the worksheet. C) displaying only specific columns.
D) displaying the data in ascending or descending order.
52) The most commonly used slide layout is: 52) ______ A) Text and Content. B) Title and Text.
C) Blank. D) Title.
53) Which type of chart shows a comparison of individual items? 53) ______ A) Pie B) Column C) Line D) Bar
54) What is the name of the program used to create data charts? 54) ______ A) PowerPoint Graph B) Peripheral Program
C) Microsoft Graph D) Microsoft Datasheet
55) What is the name of an item that is created by one program, but inserted into a document created by another program?
55) ______ A) Datasheet B) Object
56) Which toolbar would you use to add a chart to a PowerPoint slide? 56) ______ A) Formatting B) Microsoft Graph
C) Standard D) Chart
57) What is the default chart type PowerPoint automatically creates? 57) ______
A) Bar B) Column
C) Organization D) Line
58) To embed an existing Excel chart on a slide, which menu would you choose?
58) ______ A) Insert B) Tools C) File D) Edit
59) Which toolbar would you use to make formatting changes to a chart in a slide presentation?
59) ______ A) Microsoft Graph Formatting toolbar
B) PowerPoint Standard toolbar C) Microsoft Graph Standard toolbar D) PowerPoint Formatting toolbar
60) Use the following terms to identify the elements in the figure: A. scroll bar
B. Standard toolbar C. status bar D. sheet tabs
E. Formatting toolbar
COMP100 MID-TERM 2 ANSWERS (Gr.2: J-Z) 1) C
2) B 3) B 4) A 5) C 6) C
7) power supply 8) EBCDIC 9) footprint 10) A
11) decode 12) width
13) expansion slot 14) motherboard 15) PC cards 16) A
17) A 18) B 19) preview 20) D 21) B 22) A 23) D 24) B
25) right-click 26) B
27) D 28) A 29) B 30) B 31) B 32) D 33) D 34) Word 35) B 36) C 37) B 38) C 39) C 40) D 41) A 42) C 43) D 44) A 45) D 46) D 47) B 48) C
49) ascending 50) insertion point 51) D
52) B 53) D 54) C 55) C 56) C 57) B 58) A 59) C
