• No results found

aerodynamic design

CFD analysis on aerodynamic design optimization of wind turbine rotor blade

CFD analysis on aerodynamic design optimization of wind turbine rotor blade

... R.S. Amano, R.J. Malloy (2009) had study on the optimization of aerodynamic design of wind turbine rotor blade by CFD with two cases one is Straight edge blade and second Swept edge blade. In this work they ...

5

Aerodynamic design optimization using flow feature parameterization

Aerodynamic design optimization using flow feature parameterization

... in aerodynamic design problems only began in earnest following the widespread use of the modern digital ...aerospace design context, such functions are rarely optimized per ...in design ...

240

Aerodynamic Design of High Performance Car.

Aerodynamic Design of High Performance Car.

... optimum design strategies has been ...a design optimization procedure appears as a critical point and, thus, a suitable strategy must give a good compromise between costs and effectiveness in reaching the ...

6

Aerodynamic Design Optimization Using Genetic Algorithm (RESEARCH NOTE)

Aerodynamic Design Optimization Using Genetic Algorithm (RESEARCH NOTE)

... Holst and Pulliam [14] proposed a method for aerodynamic shape optimization of airfoils and transonic wing using a real number encoding genetic algorithm. For the airfoil they used an Euler equation solver while ...

12

Robust aerodynamic design optimization of variable speed wind turbine rotors

Robust aerodynamic design optimization of variable speed wind turbine rotors

... Deterministic Design: 10th Aerodynamic Design Optimisation Seminar ADOS 2012 Background & Objectives Performance Assessment POWER CURVES ANNUAL ENERGY YIELD AT SELECTED WIND SPEEDS Simul[r] ...

28

Robust aerodynamic design of variable speed wind turbine rotors

Robust aerodynamic design of variable speed wind turbine rotors

... robust design optimization based on global search methods is appealing and promising, but so far the URQ uncertainty propa- gation technique has not been used in global design ...the aerodynamic ...

13

Aerodynamic design optimization of wind turbine rotors under geometric uncertainty

Aerodynamic design optimization of wind turbine rotors under geometric uncertainty

... HAWT design could be further improved is by accounting for the effects of environmental, operational and engineering uncertainty throughout the design ...HAWT design. Accounting for the impact of ...

23

Aerodynamic design optimization of wind turbine rotors under geometric uncertainty

Aerodynamic design optimization of wind turbine rotors under geometric uncertainty

... HAWT design could be further improved is by accounting for the effects of environmental, operational and engineering uncertainty throughout the design ...HAWT design. Accounting for the impact of ...

24

High resolution methods for the aerodynamic design of helicopter rotors

High resolution methods for the aerodynamic design of helicopter rotors

... the design of the blade is inevitably a compromise between hover and forward flight ...tip design may also have a beneficial effect on induced ...of design compromise may be ...detail design ...

369

An industrial view on numerical simulation for aircraft aerodynamic design

An industrial view on numerical simulation for aircraft aerodynamic design

... A typical example of what CFD can deliver is in providing the local air pres- sure distributions. Near the preferred point of aircraft operation, i.e. the design cruise Mach number and related cruise lift, the CFD ...

14

AERODYNAMIC DESIGN OF AXIAL FLOW COMPRESSOR

AERODYNAMIC DESIGN OF AXIAL FLOW COMPRESSOR

... of aerodynamic performance must be maintained over a wide range of speeds and ...mechanical design should be simple, so as to reduce manufacturing time and ...

6

Aerodynamic design of a multi point operational high speed inlet

Aerodynamic design of a multi point operational high speed inlet

... Fig. 3.2: Simplified sketch of a typical ramjet inlet at design Mach number, without depicted expansions and shock reflections. The inlet is comprised of 3 parts: a supersonic diffuser section between positions 0  ...

167

Design and structural analysis of missile nose cone using different materials

Design and structural analysis of missile nose cone using different materials

... the aerodynamic design of the nose cone section of any vehicle or body meant to travel through a compressible fluid medium (such as a rocket or aircraft missile or bullet), an important problem is the ...

6

Design Estimation of Aerodynamic Angles of High Speed Cars

Design Estimation of Aerodynamic Angles of High Speed Cars

... to aerodynamic considerations despite of surprisingly high ...cars aerodynamic aspects have been greatly ...to design vehicle shapes that produce desirable flow ...all aerodynamic ...

5

Development of a computer program for rocket aerodynmic coefficients estimation

Development of a computer program for rocket aerodynmic coefficients estimation

... Aerodynamics is required throughout the design process of any flight vehicle. These aerodynamics are used for flight performance estimates, including range, maneuverability, distance and stability analysis. In ...

16

A Review on “Reduction of Drag Force using ADD ON Devices”

A Review on “Reduction of Drag Force using ADD ON Devices”

... Two experimental approaches for the investigation of external aerodynamics of different car models were presented by different authors. Combining wind tunnel experiments and CFD computation, he has shown how integration ...

10

Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning

Development Of Aerodynamic Smoke Tunnel Unit For Teaching And Learning

... The two types of boundary layer flow (Figure 2.5 and Figure 2.6) have important differences in their properties and these can be exploited in aerodynamic design. The main practical effects are that the ...

24

New aerodynamic approaches to suction system design

New aerodynamic approaches to suction system design

... the aerodynamic design of Hybrid Laminar Flow Control suction systems is ...the design of a suction ...the aerodynamic drag benefit, yielding a more streamlined design ...

10

Paper 06-2016-1

Paper 06-2016-1

... blade aerodynamic load, such as lifting line theory combined with airfoil experimental data, given as a function of the local angle of attack and Mach ...helicopter aerodynamic load ...

14

Numerical Analysis of Savonius Wind Turbine Using Fluid Dynamics

Numerical Analysis of Savonius Wind Turbine Using Fluid Dynamics

... Figure 2 shows the design of the blade. In reality the blade is made up of fibre reinforced plastic (FRP) i.e. (POLY CARBONATE) This turbine works in a similar fashion as that of all turbine, as the air strikes ...

6

Show all 10000 documents...

Related subjects