• No results found

Combustion and ignition properties

Ignition and combustion of future oxygenated fuels in compression-ignition engines

Ignition and combustion of future oxygenated fuels in compression-ignition engines

... compression ignition combustion with potential alternative fuels, which could be developed from environmentally friendly sources and combusted with low exhaust gas emissions and with high engine thermal ...

282

Modeling ignition and extinction in condensed phase combustion

Modeling ignition and extinction in condensed phase combustion

... material properties of the laminate/arrays ...average properties of the system, such as bulk temperature and reaction extent, or the self-propagation speed of a reactive front propagating along the axis of ...

132

Combustion in Compression Ignition Engine Using CFD

Combustion in Compression Ignition Engine Using CFD

... CFD, Combustion, k- ε model I. INTRODUCTION The compression ignition engine is an internal combustion engine which uses the increase in temperature during compression stroke to ignite fuel charge ...

5

Ignition and combustion of single particles of coal and biomass

Ignition and combustion of single particles of coal and biomass

... of combustion behaviour of El Cerrejón coal and white wood pellets ...step combustion, however the differences on chemical and physical properties led to differences in burning ...behaviour. ...

6

Conventional and Alternative Jet Fuels for Diesel Combustion: Surrogate Development and Insights into the Effect of Fuel Properties on Ignition.

Conventional and Alternative Jet Fuels for Diesel Combustion: Surrogate Development and Insights into the Effect of Fuel Properties on Ignition.

... and ignition delay time, since this property has not been previously considered as a target property for ...physical properties on the ignition ...

158

Modeling the combustion of light alcohols in spark-ignition engines

Modeling the combustion of light alcohols in spark-ignition engines

... Dilution changes the thermophysical properties of the reacting mixture and can also affect the oxidation reaction kinetics. A dilution process leads to changes in mixture heat capacity, exothermicity, heat and ...

449

Modeling of combustion in spray-guided spark-ignition engines

Modeling of combustion in spray-guided spark-ignition engines

... shape forms due to advected and merged flame kernels launched during multiple igni- tion events along the re-striking spark-channel in the high velocity flow field of SG-SIDI engines. The application of a single flame ...

168

Spark Ignition Combustion of Direct Injected Alternative Fuels

Spark Ignition Combustion of Direct Injected Alternative Fuels

... For both fuels the OH * chemiluminescence recurrently expanded to the left and ver- tically before continuing around the perimeter to the right of the combustion chamber volume. The void on the right was not due ...

130

The Review of Ignition and Combustion Processes for Water-Coal Fuels

The Review of Ignition and Combustion Processes for Water-Coal Fuels

... thermo-physical properties of coals with temperature growth or changes of particle shape and finally estimate the effect of all mentioned earlier onto the conditions and parameters of ...

13

Experimental Study of Oxidation, Ignition and Combustion of Aluminum Based Nanomaterials

Experimental Study of Oxidation, Ignition and Combustion of Aluminum Based Nanomaterials

... physiochemical properties of energetic particles such as the ignition temperature, the burn rate and the specific impulse depend heavily upon the technique of powder production and the final particle ...

196

Spark ignition internal combustion engine modelling using Matlab

Spark ignition internal combustion engine modelling using Matlab

... engines, combustion products remain within the cylinder when the exhaust valve ...These combustion products (also known as residual gases) are mixed with the fresh air-fuel mixture that enters the engine ...

41

A study of the ignition delay characteristics of combustion in a compression ignition engine operating on blended mixtures of diesel and gasoline

A study of the ignition delay characteristics of combustion in a compression ignition engine operating on blended mixtures of diesel and gasoline

... blends combustion in CI engine that could enhance the zero-dimensional theoretical study of diesel-gasoline ...gasoline combustion in CI engine, effect of engine parameters and fuel properties on ...

187

Numerical Accuracy of the Kiva4 Code under Different Ignition Timing on the Combustion Characteristics of Gasoline in a Spark Ignition Engine

Numerical Accuracy of the Kiva4 Code under Different Ignition Timing on the Combustion Characteristics of Gasoline in a Spark Ignition Engine

... and combustion events, too small and thin cells lead to long CPU times for the gas phase calculation and can be- come a possible cause of prediction inaccuracy [1] ...the properties of vertex or cell or ...

24

Investigation into fuel pre-treatments for combustion improvement on a compression ignition engine

Investigation into fuel pre-treatments for combustion improvement on a compression ignition engine

... fuel combustion are all done using the P-R ...fuel combustion is higher than that of spray combustion at most time after the ...gas-like properties, and thus results in more sufficient ...

203

Effect of biofuel E85 combustion on fuel consumption in spark-ignition engines

Effect of biofuel E85 combustion on fuel consumption in spark-ignition engines

... When combusting the biofuel E85, the reduced fuel consumption of 352 g.kW −1 .h −1 was recorded in the zone of the maximum torque. As compared with gasoline BA95, this fuel consumption was higher by 81 g.kW −1 .h −1 . ...

8

Diluted combustion of methanol in spark-ignition engines with on-board fuel reforming

Diluted combustion of methanol in spark-ignition engines with on-board fuel reforming

... E NGINE SIMULATION 159 averaged value of the gas temperature before and after the catalyst was used to represent the catalyst temperature. Three reaction rates in equations 7.1-7.3 were employed. The catalyst has a ...

254

Combustion and emissions performance of oxygenated fuels in a modern spark ignition engine

Combustion and emissions performance of oxygenated fuels in a modern spark ignition engine

... physicochemical properties are competitive to ...lubrication properties, so would help to reduce engine component wear (Felix-Moore, ...physicochemical properties make DMF a potentially viable ...

295

Numerical Analysis of Biodiesel Combustion in a Direct Injection Compression Ignition Engine

Numerical Analysis of Biodiesel Combustion in a Direct Injection Compression Ignition Engine

... the combustion reaction within an optical Sandia/Cummins N14 direct-injection compression ignition engine are ...a combustion model for ...biodiesel combustion model in the pertinent ...

119

Laser Ignition System for Internal Combustion Engine

Laser Ignition System for Internal Combustion Engine

... upon combustion, higher auto-ignition temperature, low ignition energy, higher diffusivity and higher upon combustion, higher auto-ignition temperature, low ignition energy, ...

6

Study on the ignition behavior and kinetics of combustion of biomass

Study on the ignition behavior and kinetics of combustion of biomass

... 3.1 Thermal characteristics of straw in air and N 2 environments using TGA The thermal characteristics of different sizes of straw under air and N 2 conditions are examined using TGA, the heating rate is 1200 ℃ h -1 . ...

6

Show all 10000 documents...

Related subjects