• No results found

Comparison between experiment and simulation results

Virgin domain structures in mesoscopic Co patterns: Comparison between simulation and experiment

Virgin domain structures in mesoscopic Co patterns: Comparison between simulation and experiment

... direct comparison between theory and ex- ...the results of an XMCD- PEEM study of 20-nm-thick rectangular Co elements with aspect ratios of 1:1, 1:2, and 1:3 and widths of 200, 400, and 600 nm and ...

6

Comparison of Newton Correction Between Joule s Law Experiment and Ice Heat of Fusion Experiment

Comparison of Newton Correction Between Joule s Law Experiment and Ice Heat of Fusion Experiment

... thermophysical experiment results is largely determined by the accuracy of temperature ...the results of Newton Correction applications on two experiments using ...the experiment of converting ...

5

Multistatic SAR Imaging: Comparison of Simulation Results and Experimental Data

Multistatic SAR Imaging: Comparison of Simulation Results and Experimental Data

... This results in a theoretical AASR performance of about -15 dB for the reconstructed ...the results obtained from Figure 6 the simulated values have to be adjusted by -3 ...the simulation ...

5

Illumination simulation with Specter in aviation industry. - Uncertainty of simulation results from Specter in comparison with real measurement -

Illumination simulation with Specter in aviation industry. - Uncertainty of simulation results from Specter in comparison with real measurement -

... calculation results, a comparison of real existing measurements with calculation results from the simulation is ...of simulation results gives the reliability of the ...

5

Modelling and simulation of an inverted 
		pendulum system: comparison between experiment and cad physical model

Modelling and simulation of an inverted pendulum system: comparison between experiment and cad physical model

... LQR Controller is a special case of optimal control that can analytically solved when weighting matrices are selected correctly (Xiumin Diao, Dr. Ou Ma, 2006). The results of the SimMechanics are compared with the ...

6

Comparison between the classical theory predictions and molecular simulation results for heterogeneous nucleation of argon

Comparison between the classical theory predictions and molecular simulation results for heterogeneous nucleation of argon

... vapor simulation is that the cluster partition function in that case takes the cluster-monomer and cluster-cluster interactions into ...Comparisons between the prediction of the nucleation rate by methods ...

12

Results from the International Halocarbons in Air Comparison Experiment (IHALACE)

Results from the International Halocarbons in Air Comparison Experiment (IHALACE)

... CFC-12 results that differ significantly from the laboratories that developed the scales (scale origin, shown as circles for each scale color in ...communication between laboratories re- garding calibration ...

22

A comparison study between observations and simulation results of Barghouthi model for O and Houtflows in the polar wind

A comparison study between observations and simulation results of Barghouthi model for O and Houtflows in the polar wind

... a comparison between polar wind simulations obtained using Barghouthi model with corresponding observations obtained from dif- ferent ...the simulation tube due to wave-particle inter- actions that ...

19

Spacecraft potential during an active experiment: a comparison of experimental results with a simple model

Spacecraft potential during an active experiment: a comparison of experimental results with a simple model

... Since the only measurable quantity is the potential differ- ence between the probe and satellite, we plotted these differ- ences as a function of the plasma density in Fig. 4, curve a. We can see that calculated ...

8

Integrated optical networks of microring resonators : a comparison between theory and experiment

Integrated optical networks of microring resonators : a comparison between theory and experiment

... Chapter 8 Conclusion In the process of fabrication of a waveguide chip, there are certain errors of manufacture that have to be taken into account. Only the designed dimensions of a waveguide net- work are known when ...

56

Numerical simulation of flow over EPPLER 387 at low Reynolds number and comparison with experiment

Numerical simulation of flow over EPPLER 387 at low Reynolds number and comparison with experiment

... [1,2,3,4,5,6] Aerospace Department, International Institute For Aerospace Engineering And Management, Jain University DOI: 10.29322/IJSRP.9.01.2019.p8528 http://dx.doi.org/10.29322/IJSRP.9.01.2019.p8528 Abstract- This ...

16

Improving the Multi-Dimensional Comparison of Simulation Results: A Spatial Visualization Approach

Improving the Multi-Dimensional Comparison of Simulation Results: A Spatial Visualization Approach

... These results are usually displayed in tabular or line graph ...of results makes cross-graph comparisons easier than for tables, the constraint to three dimensions within a graph ...spatial ...

14

1H line width dependence on MAS speed in solid state NMR –
comparison of experiment and simulation

1H line width dependence on MAS speed in solid state NMR – comparison of experiment and simulation

... Subtle details of spectra were faithfully reproduced by simulation, validating our computational approach to a complicated many- spin and time-dependent problem. The 1 H homogeneous line broadening had been ...

17

A mathematical model of the evaporation of a thin sessile liquid droplet : comparison between experiment and theory

A mathematical model of the evaporation of a thin sessile liquid droplet : comparison between experiment and theory

... preliminary results indicate that this generalisation improves the quantitative agreement between the theoretical predictions and experimental results for acetone and methanol in air, but still leads ...

17

Numerical Simulation And Experiment Performance For Comparison Of Shell And Tube Heat Exchanger With Plain Tube And Corrugated Tube

Numerical Simulation And Experiment Performance For Comparison Of Shell And Tube Heat Exchanger With Plain Tube And Corrugated Tube

... prototype experiment model of shell and tube heat exchanger in which plain and corrugated tube is use one after one and take reading for thermal analysis calculation and then compare Experiment Result to ...

6

Computational Simulation as Theoretical Experiment

Computational Simulation as Theoretical Experiment

... with simulation models, how wide their scope ...of simulation results whether these results are particular or are more widely applicable, even when the algorithm of the simulation is ...

19

Electromagnetic Field Simulation for ICRF Antenna and Comparison with Experimental Results in LHD

Electromagnetic Field Simulation for ICRF Antenna and Comparison with Experimental Results in LHD

... heating experiment is now testing only one device in LHD ...calculated results of antenna coupling, heat load due to dissipated RF power, and electromagnetic field distribution are studied and compared with ...

5

Optimized FSI flow simulation using modern up to date software systems: 
		A direct comparison between simulated and tunnel results

Optimized FSI flow simulation using modern up to date software systems: A direct comparison between simulated and tunnel results

... FSI simulation is to verify that the data obtained with the software are ...the simulation, if the software is not able to take care of most of the ...a simulation was carried out on a relatively ...

9

The LEAPTech Experiment, Approach, Results, Recommendations

The LEAPTech Experiment, Approach, Results, Recommendations

... • For the unblown wing, CL and CD are essentially invariant with moderate changes in test airspeed • True because at our test condition (M = 0.1, Re = 10^6), we are not near any M or Re “boundaries” • So, if test dynamic ...

47

Additive manufacturing of an oxide ceramic by laser beam melting-comparison between finite element simulation and experimental results

Additive manufacturing of an oxide ceramic by laser beam melting-comparison between finite element simulation and experimental results

... 2. CEMEF – Centre de mise en forme des matériaux, CNRS UMR 7635, 1 rue Claude Daunesse, CS 10207, 06904 Sophia Antipolis Cedex, France Abstract: Recent progress in the application of Laser Beam Melting (LBM) of oxide ...

44

Show all 10000 documents...

Related subjects