Cooling, Particle
Quasi One Dimensional Analysis of the Effects of Pipe Friction, Cooling and Nozzle Geometry on Gas/Particle Flows in HVOF Thermal Spray Gun
... the particle velocity and temperature, which depend on the gas flow in the HVOF ...and cooling along the inner wall of the long ...friction, cooling and nozzle ...and cooling are selected based ...
7
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
... Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasi- bility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or ...
23
Influence of Water Cooling on Orthogonal Cutting Process of Ti-6Al-4V Using Smooth-Particle Hydrodynamics Method
... water cooling is essential to decrease the cutting force, increase the life of the cutting tool and decrease the machined surface temperature of ...smooth particle hydrodynamics (SPH) method. The effects of ...
8
Influence of Cooling Rate on Primary Particle and Solute Distribution in High Speed Twin Roll Cast Al Mn Based Alloy Strip
... constituent particle detached during sample preperation such as ...high cooling rate showed rela- tively higher solute concentration in Al ...high cooling rate of HSTRC during ...
7
Multiple scattering and particle identification in the Muon Ionisation Cooling Experiment
... Ionisation cooling is influenced by two processes as the muon passes through material; energy loss, which contributes to the cooling of the beam, and multiple Coulomb scattering, which causes heating of the ...
244
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
... Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or ...
15
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
... Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or ...
16
Study of flow around model of cooling tower by means of 2D Particle Image Velocimetry measurement
... The model of hyperboloid shaped object was measured by means of 2D Particle Image Velocimetry in the Wind Tunnel with simulated atmospheric boundary layer. The model was tested in subcritical range of Reynolds ...
5
Beam instrumentation and investigations into muon cooling at MICE
... A particle is required to induce hits in both the virtual detectors producing the MC information, and be likely to produce two five point tracks in the trackers, although no recon- struction is performed to verify ...
189
Rate-equation approach to cavity-mediated laser cooling
... the cooling of a weakly confined particle inside a strongly coupled cavity is of practical interest for the cooling of ...trapped particle and the field inside an optical cavity is in principle ...
14
Estimation of cooling rates during close-coupled gas atomization using secondary dendrite arm spacing measurement
... the particle and the gas, via ...of Particle Image Velocimetry (PIV) techniques to gas atomization [24] has revealed complex recirculation patterns both within the melt plume and in the adjacent ...
15
Electron-muon ranger : performance in the MICE muon beam
... Ionization Cooling Experiment (MICE) [10] collaboration intends to demonstrate the feasibility of an ionization-cooling cell suitable for cooling muon beams at a Neutrino ...of cooling ...
22
Strong Pinned Spin Mediated Memory Effect in NiO Nanoparticles
... to particle size and distribution effects, other magnetic coupling parameters such as inter- and intra-coupling strength, exchange bias, interfacial pinned spins, and the crystallinity of the nanoparticles also ...
8
Journal of Applied Pharmaceutical Science
... its particle size distribution, nanoemulsifying properties, robustness to dilution, self-emulsification time, turbidity measurement, drug content and in-vitro ...heating cooling cycle, centrifugation ...
12
Computational Study on Melting Process Using Smoothed Particle Hydrodynamics
... smoothed particle hydrodynamics (SPH) method has become popular in computational fluid dynamic and heat transfer ...surface particle heat transfer governed by convectional heat ...local particle ...
5
Integrated approach in building design for passive cooling in hot and dry climates of India
... evaporative cooling strategy ...evaporative cooling system as a promising approach to achieve thermal comfort in buildings ...on cooling process ...efficient cooling and ventilation in hot and ...
6
Development Of Smart Temperature Monitoring System Using Ubidots
... and cooling structure is being arranged, the possibility of the kind of control system must be consolidated into a showing ...the cooling operation depending upon room temperature ...
24
A magnetic resonance (MR) compatible selective brain temperature manipulation system for preclinical study
... systemic cooling method could lead to multiple side effects, while the incompatibility with magnetic resonance imaging of the present selective cooling methods highly limit their application in preclinical ...
10
Membrane Cooling Technique for Cooling of Air
... Various cooling methods have been currently used to cool the inlet air, such as evaporative cooling, chiller cooling and absorption ...for cooling of air, known as membrane ...above ...
5
The Effect of Pre Exercise Cooling on Performance Characteristics: A Systematic Review and Meta Analysis
... of cooling different body parts [27]. Internal pre-cooling aims to reduce core temperature and can be performed by ingesting cold water [28] or crushed ice [29] while mixed-method pre-cooling usually ...
25