• No results found

Glass substrates

Growth of Well Aligned InN Nanorods on Amorphous Glass Substrates

Growth of Well Aligned InN Nanorods on Amorphous Glass Substrates

... Si substrates, it cannot lead to a conclusion that vertically aligned GaN nanowires can be spontaneously formed on bulk metal or glass ...amorphous substrates, it is facile to obtain well-aligned GaN ...

7

Residual Stress in Cu Sputtered Films on Glass Substrates at Different Substrate Temperatures

Residual Stress in Cu Sputtered Films on Glass Substrates at Different Substrate Temperatures

... (strain/stress) of copper (fcc) films sputter deposited onto glass substrates is reported, and the relation between stress in these films and the microstructure of the films proposed by SZM is explained. Cu ...

6

Formation of Poly Si Films on Glass Substrates by Using Microwave Plasma Heating and Fabrication of TFT’s on the Films

Formation of Poly Si Films on Glass Substrates by Using Microwave Plasma Heating and Fabrication of TFT’s on the Films

... microwave power of 1000 W, and a hydrogen gas flow rate of 5 sccm. We confirmed that the temperatures of tungsten films increased to above 1000˚C within 5 s when they were exposed to hydrogen plasma formed using the ap- ...

6

Preparation and characterization of alkyl thiols monolayer on glass 
		substrates by
		
		microcontact printing

Preparation and characterization of alkyl thiols monolayer on glass substrates by microcontact printing

... (3-Mercaptopropyl) trimethoxysilane (MPTMS) 95%, anhydrous toluene 99.8% and fluorescein-5- maleimide diacetate were purchased from Sigma-Aldrich and used as supplied. Sylgard-184 elastomer was obtained from Dow Corning. ...

6

Antireflective grassy surface on glass substrates with self masked dry etching

Antireflective grassy surface on glass substrates with self masked dry etching

... According to theoretical analysis, the subwavelength structures (SWSs) with high aspect ratio (i.e., fine period and tall height) and continuous tapered shape from the air to the substrate show the widest bandwidth and ...

5

Strength Improvement of Glass Substrates by Using Surface Nanostructures

Strength Improvement of Glass Substrates by Using Surface Nanostructures

... properties could be consistently compared between the different sample areas. The obtained pit count per unit area was 5.26, 12.94, and 18.2 for fused silica, alumino- silicate, and borosilicate glasses, respectively ...

7

Formation of Nanoporous Anodic Alumina by Anodization of Aluminum Films on Glass Substrates

Formation of Nanoporous Anodic Alumina by Anodization of Aluminum Films on Glass Substrates

... thickness of the film. We saw that under anodization in 0.3 M aqueous oxalic acid solution at a voltage of 40 V, the PAA film with a disordered array of pores was formed on aluminum films 200 – 600 nm thick, which were ...

11

Sensing Performance of EGFET pH Sensors with CZTSe Nanoparticles Fabricated on Glass Substrates

Sensing Performance of EGFET pH Sensors with CZTSe Nanoparticles Fabricated on Glass Substrates

... The as-prepared CZTSe microparticles were dispersed in isopropanol (IP) (95 wt% liquid and 5 wt% microparticles), and the mixture was stirred for 6 h. This part of the product was named solution A. Separately, ethyl ...

10

Deposition of Lu-Fe-O thin films on silica glass substrates by MOCVD

Deposition of Lu-Fe-O thin films on silica glass substrates by MOCVD

... Fe(tmhd)3, were synthesized from tmhd (2,2,6,6-tetramethyl-3,5-heptanedione) using the method described by Eisentraut and Severs [10] and purified by sublimation. These precursors were dissolved in ...

6

Forming nanoparticles of water soluble ionic molecules and embedding them into polymer and glass substrates

Forming nanoparticles of water soluble ionic molecules and embedding them into polymer and glass substrates

... collapse occurs, the absorbed ions are exposed to extreme, localized conditions of temperature and pressure. As a result, these ions impact one another and nanoparticles of the inor- ganic salt are produced as a result ...

11

Flexible glass substrates with via holes for TFT backplanes

Flexible glass substrates with via holes for TFT backplanes

... Tsukiji*****, Yamanashi Univ., Japan, *E.H.C, Japan, **Nissin Electric, Japan, ***Sumitomo Bakelite, Japan, ****Shintokogio, Japan and *****Uniopt, Japan 77 TFTpl: poly-Si TFT Technologi[r] ...

8

Capacitive Micromachined Ultrasonic Transducers (CMUTs) on Glass Substrates for Next-Generation Medical Imaging and Beyond

Capacitive Micromachined Ultrasonic Transducers (CMUTs) on Glass Substrates for Next-Generation Medical Imaging and Beyond

... smooth glass surface and a good copper-to-glass surface co-planarity are obtained [66], ...the glass substrate and AFM image of the via surface on the laser exit ...and glass are at the same ...

176

Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity

Colloidal graphite/graphene nanostructures using collagen showing enhanced thermal conductivity

... on glass substrates shows an average flake size of 350 nm, and the hexagonal diffraction pattern and thickness contours of the G flakes from transmission electron microscopy confirm # five layers of ...

12

A Study of the Initial Interactions of Osteoblast-like Cells to Titanium and Zirconium Surfaces In Vitro

A Study of the Initial Interactions of Osteoblast-like Cells to Titanium and Zirconium Surfaces In Vitro

... metallic substrates, and in addition cultured in the presence of cycloheximide throughout the incubation period, the cells still attached and ...metallic substrates was not affected by the presence of serum ...

228

Effect of Thermal and Chemical Treatment on Electrodeposited CdTe Thin Films for Solar Cell Applications

Effect of Thermal and Chemical Treatment on Electrodeposited CdTe Thin Films for Solar Cell Applications

... lime glass substrates coated with 650 nm Indium-Tin Oxide (ITO) layer deposited by sputtering technique were used ...The substrates had a high transparency and a sheet resistance of approximately 15 ...

14

Surface microstructuring to modify wettability for 3D printing of nano filled inks

Surface microstructuring to modify wettability for 3D printing of nano filled inks

... of glass slides: A 95% ethanol 5% water solution was adjusted to PH ...Palmer) glass substrates were dipped into the solution, agitated gently, and removed after 1-2 ...

16

Field Electron Emission from a CNx:H Films Formed on Al Films Using Supermagnetron Plasma CVD

Field Electron Emission from a CNx:H Films Formed on Al Films Using Supermagnetron Plasma CVD

... Abstract Hydrogenated amorphous carbon nitride a-CNx:H films were formed on p-Si, Al films deposited on n-Si Al/n-Si and glass SiO2 Al/glass substrates, using pulsed rf supermagnetron pl[r] ...

7

Bridging the gap between cell culture and live tissue

Bridging the gap between cell culture and live tissue

... or glass substrates, typically provides a static environment, which, however is the base of the present understanding of many biological processes, tissue homeostasis as well as ...

10

Physical Properties of Chemical Spray Deposited Al doped CdO Thin Films

Physical Properties of Chemical Spray Deposited Al doped CdO Thin Films

... amorphous glass substrates supplied by Blue Star Mumbai, were used to deposit the CdO thin ...films, glass slides were cleaned with detergent and distilled water, then boiled in chromic acid ...the ...

6

Fabrication of transparent composites for non-invasive Surface Enhanced Raman Scattering (SERS) analysis of modern art works

Fabrication of transparent composites for non-invasive Surface Enhanced Raman Scattering (SERS) analysis of modern art works

... nanoparticle/PDMS substrates were repetitively placed for few minutes on marked areas of commercial white paper ...cle/glass substrates and the analytical white paper sheet was obtained by placing ...

10

Show all 6108 documents...

Related subjects