• No results found

glass surface

Detachment of polymicrobial biofilms on glass surface treated with surface modifiers containing fluorocarbon chain

Detachment of polymicrobial biofilms on glass surface treated with surface modifiers containing fluorocarbon chain

... cover glass washing withCPW, WI: modified with 10F2S-3I cover glass washing CPW, WF: modified with FF01 cover glass washing with CPW, NC: cover glass without 3I cover glass without ...

5

Beer foam decay: effect of glass surface quality and CO2 content

Beer foam decay: effect of glass surface quality and CO2 content

... The quality of beer foam (volume, structure, stability, colour etc.) is a determining factor in the appearance of a good beer, especially for pilsner style beers. The pilsner style beers (i,e. beers produced by ...

9

Optical Properties of Gold Nanoparticle Assemblies on a Glass Surface

Optical Properties of Gold Nanoparticle Assemblies on a Glass Surface

... A similar experimental studies of the spectral characteris- tic of polarization difference were performed for different incident angles θ that allowed to summarize the evolution of peak positions (Fig. 6a) and values of ...

10

Separation of Surface Hardened Glass with Non-ablation Laser Technique

Separation of Surface Hardened Glass with Non-ablation Laser Technique

... laser surface scribing followed with post force breaking [2], laser cleavage with coolant-assistance [3], laser internal scribing [4] and pulsed laser ablation ...strengthened glass, it has been reported ...

9

Effect of surface roughness on adhesion strength in 
		ultrasonic soldering of glass

Effect of surface roughness on adhesion strength in ultrasonic soldering of glass

... lime glass through ultrasonic soldering ...of glass surface roughness on shear separation strength and shear separation energy between glass and ...the surface of the ...allows ...

8

Performance Analysis of Single Slope Solar Still

Performance Analysis of Single Slope Solar Still

... inner glass surface with different glass cover inclination at difrent depth of water is illustrated its variation is similar for both still and higher value is also same for all depth of watereither ...

7

Vibrio fischeri and Escherichia coli adhesion tendencies towards photolithographically modified nanosmooth poly (tert-butyl methacrylate) polymer surfaces

<em>Vibrio fischeri</em> and <em>Escherichia coli</em> adhesion tendencies towards photolithographically modified nanosmooth poly (<em>tert</em>-butyl methacrylate) polymer surfaces

... polymer surface characteristics have been modifi ed, it was important to consider whether a particular parameter or a combination of all three parameters might positively infl uence attachment of ...high ...

12

Impact of solar radiation and environmental temperature on Art Nouveau glass windows

Impact of solar radiation and environmental temperature on Art Nouveau glass windows

... the glass transmittance for radiations with wavelengths between ...material’s surface reacts to this rise in temperature by emitting long-wave heat ...indoor glass surface, which will be ...

11

Structural and surface properties of zinc-tellurite glass doped with silicon dioxide

Structural and surface properties of zinc-tellurite glass doped with silicon dioxide

... the glass composition. Glass morphologies were characterized using atomic force microscopy and WCA ...measurements. Glass surface roughness as much as 10 nm was attained which is higher than ...

47

The Mechanism by Which Aphids Adhere to Smooth Surfaces

The Mechanism by Which Aphids Adhere to Smooth Surfaces

... The logarithmw of the vertical force mg resisted y in relation to the logarithm^ of the body weight mg x for vetch aphids Megoura viciae on a glass and a silanized glass surface A and th[r] ...

11

Immobilization of His Tagged Proteins on Various Solid Surfaces Using NTA Modified Chitosan

Immobilization of His Tagged Proteins on Various Solid Surfaces Using NTA Modified Chitosan

... the surface of a glass slide and then ac- tivating the BSA with N,N,disuccinimidyl carbonate ...a surface through a cross-linking reaction in which epoxy groups on a modified glass ...

5

Designing Antifouling Surfaces for Medical Application

Designing Antifouling Surfaces for Medical Application

... modify surface of glass slides and then dipped into CTAB solutions with the above ...modified glass surface and observed the wetting properties of the water drop on glass surface ...

6

Determination of Total Internal Heat Transfer Coefficient of Single Slope Solar Still with Different Depth of Water Jyoti Raikwar 1, Mukesh Pandey2 , Anurag Gour 3

Determination of Total Internal Heat Transfer Coefficient of Single Slope Solar Still with Different Depth of Water Jyoti Raikwar 1, Mukesh Pandey2 , Anurag Gour 3

... outer glass surface with different glass cover inclination at difrent depth of water is illustrated its variation is similar for both still and higher value is also same for all depth of watereither ...

8

Investigation of chemical and physical surface changes of thermally conditioned glass fibres

Investigation of chemical and physical surface changes of thermally conditioned glass fibres

... the surface concentration of Ca might have on the strength of glass ...a glass blend slightly reduces strength, and the increases modulus of the product fibre [18] but this relates to the total ...

20

Antireflective grassy surface on glass substrates with self masked dry etching

Antireflective grassy surface on glass substrates with self masked dry etching

... The glass with flat surface has a transmittance of approximately 93%, which increases monotonically due to the mater- ial ...grassy surface with 1-min etch time has very similar curves with that of ...

5

Gold nanoparticles deposited on glass: physicochemical characterization and cytocompatibility

Gold nanoparticles deposited on glass: physicochemical characterization and cytocompatibility

... number and the morphology of initially adhered cells were evaluated 24 h after seeding. The cell proliferation activity was estimated from the increase in the cell numbers achieved on the 3rd and 6th days after seeding ...

8

Influence of Glass Fiber wt% and Silanization on Mechanical Flexural Strength of Reinforced Acrylics

Influence of Glass Fiber wt% and Silanization on Mechanical Flexural Strength of Reinforced Acrylics

... The acrylic resin was then manipulated following manufacturer´s powder/liquid ratio. The specimen mold was covered with a clean glass slab to remove excess resin and kept at room temperature for 20 minutes under ...

5

Download
			
			
				Download PDF

Download Download PDF

... The stone and glass are ascribed qualities, which are tangible and tactile––they are ‘cool’ and ‘smooth’. These people’s lives in and with the building during the 120 days of their occupancy constitutes a very ...

18

slides on light good pictures.docx

slides on light good pictures.docx

... curved surface of the glass on the convex lens bends light such that it causes the light rays originating from an object to converge on a focal ...curved surface of the glass on the concave ...

19

Design and Performance Evaluation of Structural Double Glazing Facade Technology

Design and Performance Evaluation of Structural Double Glazing Facade Technology

... ABSTRACT: Glass has evolved as one of the primary structural material used all over in ...of glass in construction has become a trend with many Indian architects with manifold of technical advancements and ...

9

Show all 10000 documents...

Related subjects