M aterial characterisation methods for thin films
Electrochemical Synthesis and Characterisation of ZrSe2 Thin Films
... Fine Chemicals. Mumbai, India). The pH of electrolytic bath was maintained to 2. The films were deposited at potential -0.830 V with respect to saturated calomel electrode (SCE) as a reference electrode. Graphite ...
8
Deposition and characterisation of functional ITO thin films
... 2.2. Band structure and related electro-optical properties 10 are degenerately-doped, leading to a Fermi level position within the conduction band. Although this method had some success, it is also self-limiting. As the ...
239
Growth and characterisation of MnSb thin films and interfaces
... to reach a maximum at the average film c parameter of 5.791(1) ˚ A. This suggests that the optimum n-MnSb growth conditions are favourable for the formation of the polymorphs. However, the polymorph content appears to ...
213
Characterisation of Spray Deposited MnO2 Thin Films
... Abstract Manganese dioxide is a low band gap, high optical constant semiconductor that exhibits ferroelectric properties. This material has in recent years had a variety of applications, particularly as an electrode, in ...
7
Growth and characterisation of thin films of CuCl and related materials
... CuCl thin film samples were coated immediately upon completion of deposition when they were intended for XRD ...electrical methods of characterisation detailed in Chapters 4 and 5 require no barrier ...
203
Fabrication And Physical Characterisation Of Zinc Oxide Thin Films
... ZnO thin films can be fabricated using several techniques on many types of ...ZnO thin films can be fabricated using several techniques, some aspects such as associated defects and their ...
36
Fabrication and characterisation of electrodeposited and magnertron-sputtered thin films
... MnO–Zn thin film was deposited on glass substrate by RF magnetron sputtering ...required thin films have been achieved by using a mixture of high-purity ZnO with 36 ...
10
Fabrication and characterisation of electrodeposited and magnetron sputtered thin films
... MnO–Zn thin film was deposited on glass substrate by RF magnetron sputtering ...required thin films have been achieved by using a mixture of high-purity ZnO with 36 ...
10
Characterisation of Thin Films Using a Coherence Scanning Interferometry
... 2 films on Si substrate ranging from ~50 nm to ~2 ...photoresist films on Si by using the HCF approach and conventional methods (spec- trophotometry and ...
7
The synthesis, characterisation and functional testing of metal oxide thin films
... Further work is required to establish what the critical difference between the glass and steel substrate is, see Chapter 5 for possible strategies. 4.3.4 Mechanism of brookite formation These results presented in the ...
168
Preparation and Characterisation of ZnO Thin Films by Spray Pyrolysis Method
... the films was measured with an ultraviolet-visible-near infrared spectrophotometer, the thickness of the films was measured using a profilometer and the band gap energy was calculated from the thickness and ...
5
Growth, characterisation and surface structures of MnSb and NiSb thin films
... MnSb bulk to be observed using the TEY method. A J dependent MnSb(0001) growth study shows a series of interesting results. Firstly, in the XRD data a number of additional reflections have been seen. Some of these ...
161
Lithiation and Characterisation by Ion Beam Techniques of V2O5 Thin Films
... the thin films in the visible wavelength spectrum to obtain transmittance ...5 thin film took place at those ...the thin film, demonstrating the several oxidation states of ...
44
Preparation and Characterisation of Nickel Doped Zinc Oxide Thin Films in comparison to ZnO Thin Films by Sol Gel Method
... [Ni(CH 3 COO) 2 . 4H 2 O] were used to prepare Ni doped ZnO thin films. Mono-ethanolamine (MEA) [C 2 H 7 NO] was used as stabilizing agent. Appropriate quantity of ZAD and NAT were mixed in 25 ml of ethanol ...
9
Characterisation of interface spin clusters in polycrystalline exchange bias thin films
... Different calibration samples have different advantages. A Nickel sample easily reaches saturation magnetisation which then remains constant for a wide range of fields. The disadvantage is that the total moment is much ...
165
Characterisation of half metallic thin films using polarised neutron reflectometry
... Using a hybrid model, where by the SLD was rigidly fitted to other data obtained, then relaxed, was found the best method of modelling the data. It is important to note, that this was only confirmed when comparing this ...
202
Characterisation of lead barium zirconate thin films for utilisation of the electrocaloric effect
... Zirconate thin films deposited by a spin coating sol-gel process onto platinised silicon substrates has been undertaken to investigate a potential application utilising the reported electrocaloric ...
17
Synthesis and Characterisation of In2S3 Thin Films Deposited by Spray Pyrolysis Method
... in thin film solar cells, as absorber layer in nanostructured solar cells, and also counter electrode in dye sensitised solar ...the films were deposited on glass substrate using the spray pyrolysis method ...
5
Structural and Optical Dispersion Characterisation of Sprayed Nickel Oxide Thin Films
... chemical methods, such as sputtering [10], pulsed laser deposition [11], chemical bath deposi- tion [10,12] and sol-gel [13] have been used to obtain nickel oxide ...these methods offer different ad- ...
9
Optical Characterisation of ZnSe Thin Films by Using Electro Deposition Technique
... ZnSe thin film, by varying doping concentration of selenium oxide on ITO plate using a relatively simple and low cost traditional electrodeposistion ...ZnSe thin films for structural, optical ...
7