• No results found

Maximum indoor temperatures for all combinations

Meta-analysis of indoor temperatures in new-build housing

Meta-analysis of indoor temperatures in new-build housing

... recommended maximum of 26°C for more than 30% of summer night time hours, during a generally cool ...comfortable temperatures as anticipated by the BS EN 15251 standard (albeit at low temperatures), ...

35

Meta-analysis of indoor temperatures in new-build housing

Meta-analysis of indoor temperatures in new-build housing

... summertime temperatures in 268 typical dwellings in Leicester found approximately 15% of bedrooms exceeded the recommended maximum of 26°C for more than 30% of summer night time hours, during a generally ...

38

Forecasting indoor temperatures during heatwaves using time series models

Forecasting indoor temperatures during heatwaves using time series models

... for all three dwellings and for all of the forecasting horizons up to 72 ...internal temperatures tended to be under-predicted for two dwellings, MBE up to ...elevated temperatures during the ...

13

Forecasting Monthly Maximum Temperatures in Kerbala Using Seasonal ARIMA Models.

Forecasting Monthly Maximum Temperatures in Kerbala Using Seasonal ARIMA Models.

... To test the forecasting skill of the remaining models, they were applied to forecast the max. monthly temperature for the year 2016. The most significant criterion for selecting a forecast model is its accuracy i.e. how ...

10

Last interglacial model–data mismatch of thermal maximum temperatures partially explained

Last interglacial model–data mismatch of thermal maximum temperatures partially explained

... edge all groups for providing the simulated LIG temperature time series, in particular Sylvie Charbit, Matthias Gröger, Uta Krebs- Kanzow, Madlene Pfeiffer, Steven Phipps, Stefan Ritz, Emma Stone and Vidya ...

12

Phenomenon of Maximum and Minimum in the Resistivity of Cu-Mn Kondo Alloys at Low Temperatures

Phenomenon of Maximum and Minimum in the Resistivity of Cu-Mn Kondo Alloys at Low Temperatures

... has all kind of magnetic interaction mechanisms and matches with all theoretical expressions, where, for example, the first two terms consistent with Kondo effect and the task of the theoretical physics is ...

5

Spatial-temporal trends of rainfall, maximum and minimum temperatures over west Africa

Spatial-temporal trends of rainfall, maximum and minimum temperatures over west Africa

... Abstract—This article investigates the magnitude and signifi- cance of spatial-temporal trends of 37 years’ time series of the gridded data for rainfall, maximum (Tmax) and minimum (Tmin) temperature for West ...

14

Meta-analysis of summertime indoor temperatures in newly-built, retrofitted and existing UK dwellings

Meta-analysis of summertime indoor temperatures in newly-built, retrofitted and existing UK dwellings

... 6. Conclusion This study, based on data collected during the summer of 2013 in nine different locations across the UK assessed the prevalence of summertime overheating in bedrooms and living rooms in existing, ...

22

Trends in 1970-2010 Southern California Surface Maximum Temperatures: Extremes and Heat Waves

Trends in 1970-2010 Southern California Surface Maximum Temperatures: Extremes and Heat Waves

... 2 these two highly populated urban air basins. The results from the rapid post-1970 warming period for all sites together showed asymmetric warming, as minimum temperature (T min ) values increased faster than T ...

60

Comparison of two calculation methods used to estimate cooling energy demand and indoor summer temperatures

Comparison of two calculation methods used to estimate cooling energy demand and indoor summer temperatures

... Results for the space cooling energy demand during the period June, July and August for the different calculation methods, zones and building constructions are shown in Table 3. In case of the single office rooms Table 3 ...

8

Two Stage Maximum Likelihood Estimation (TSMLE) for MT CDMA Signals in the Indoor Environment

Two Stage Maximum Likelihood Estimation (TSMLE) for MT CDMA Signals in the Indoor Environment

... and maximum likelihood (ML) estimates of the quadrature channel gains are com- ...Here, all channel amplitudes and phase variations are lumped into the quadrature gains, which are considered to be Gaussian ...

12

Multiple shRNA combinations for near-complete coverage of all HIV-1 strains

Multiple shRNA combinations for near-complete coverage of all HIV-1 strains

... select combinations of highly-conserved anti-HIV shRNAs to target a maximum number of viral variants whilst minimizing the risk of selecting for escape ...26 combinations of 2 to 7 shRNA with some ...

15

Calibrating historic building energy models to hourly indoor air and surface temperatures: Methodology and case study

Calibrating historic building energy models to hourly indoor air and surface temperatures: Methodology and case study

... for all stone walls, thus neglecting the variability of the mortar, and by using only one sample to measure the specific heat, we obtained a rather bad approximation of the real ...air temperatures averaged ...

8

Multiscale Variability in North American Summer Maximum Temperatures and Modulations from the North Atlantic Simulated by an AGCM

Multiscale Variability in North American Summer Maximum Temperatures and Modulations from the North Atlantic Simulated by an AGCM

... daily maximum temperature simulated by ECHAM5 forced by his- torical SSTs for 1930–2013 and validated using NCEP–DOE AMIP-II reanalysis over the 1980–2009 ...into maximum warming transiting ...average ...

14

Hyperoxia increases maximum oxygen consumption and aerobic scope of intertidal fish facing acutely high temperatures

Hyperoxia increases maximum oxygen consumption and aerobic scope of intertidal fish facing acutely high temperatures

... elevated temperatures such as those observed in rock pools ...under all conditions), the observed expansion of MS at 29°C under hyperoxia could potentially benefit the aerobic performance, and hence the ...

9

Maximum torque of combinations threat for spur gear based on AGMA standard

Maximum torque of combinations threat for spur gear based on AGMA standard

... Two gear materials with high value of allowable contact stress compared to its allowable bending stress was chosen for the study as they are predicted to have g transformation curve f[r] ...

5

Case Study of The Relationship between Heat-Resistant Paint and Comfortable Indoor Temperatures

Case Study of The Relationship between Heat-Resistant Paint and Comfortable Indoor Temperatures

... Higher temperatures can cause health problems such as heat stroke, and the number of cases increases sharply in people over 65 years ...controlling indoor temperatures using heat-resistant ...

5

0150511194-A-130708 All Indoor User Manual

0150511194-A-130708 All Indoor User Manual

... Your air conditioner may be subject to any change owing to the improvement of JCI products. VRF series multiple air conditioning systems adopt the consistent running mode, by which, all indoor units can ...

28

Downscaling probability of  long heatwaves based on seasonal mean daily maximum temperatures

Downscaling probability of long heatwaves based on seasonal mean daily maximum temperatures

... 3 Universidade Federal de Viçosa, Department of Agricultural Engineering, Viçosa, MG, Brazil 4 Department of Geosciences, University of Oslo, P.O. Box 1047 Blindern, 0316 Oslo, Norway Correspondence: Rasmus E. Benestad ...

16

On maximum-likelihood estimation in the all-or-nothing regime

On maximum-likelihood estimation in the all-or-nothing regime

... While this paper sets a first step in understanding a wider range of optimal estimators in sparse high-dimensional infer- ence problems, a general theory of the all-or-nothing statistical transition is still ...

9

Show all 10000 documents...

Related subjects