metal and ceramic brackets
<p>Enamel demineralization around metal and ceramic brackets: an in vitro study</p>
... between metal and ceramic bracket materials in the aspect of enamel demineralization under ...with ceramic and metal brackets using ...and ceramic brackets with regard to ...
7
Comparison of Bond Strength of Metal and Ceramic Brackets Bonded with Conventional and High-Power LED Light Curing Units
... metal brackets and three seconds for ceramic brackets by high-power LED unit were ...for ceramic brackets was in the required range for both LED units; while the bond strength of ...
8
Comparison of Shear Bond Strength of Orthodontic Metal and Ceramic Brackets Bonded Using Monowave and Polywave Light Emitting Diode Curing Units: An Invitro study
... orthodontic brackets has reduced patient chairside time, reduced the band space that needed to be closed at finishing, improved the esthetics and aided in the improvement of oral ...
66
Comparison of shear bond strength of two orthodontic bonding systems used for bonding ceramic brackets (Polycrystalline) to zirconia surfaces: An Invitro study
... of metal and ceramic brackets and found that the universal primer (Monobond plus) generated high bond strengths of both metal and ceramic brackets on all the six restorative ...
80
Assessment of Enamel Loss after Debonding of Ceramic, Composite and Metal Bracketsan: An In Vitro Study.
... of metal and ceramic orthodontic brackets to enamel used three types of orthodontic brackets (metal, ceramic with chemical retention, and ceramic with mechanical ...
91
<p>Adult Perceptions of Different Orthodontic Appliances</p>
... (hybrid) brackets; (5) ceramic brackets; (6) self-ligating ceramic brackets; (7) shaped brackets (heart-shaped and superman logo-shaped); (8) Clear aligner trays; and (9) no ...
10
Shear Bond Strength of Rebonded Ceramic Brackets Using Four Different Methods of Adhesive Removal
... of metal brackets by CO2 laser, Er:YAG laser, sandblasting and direct flame, sandblasting yielded the maximum amount of SBS, which was inconsistent with our study ...
9
A comparative study of frictional resistance of different orthodontic Archwires on ceramic brackets: an in vitro study
... without metal slot bracket, SS wire combination to ± ...steel, ceramic bracket with conventional slot, ceramic bracket with metal reinforced slot and self-ligating ceramic ...Ligating ...
5
Effects of at-home and in-office bleaching on the shear bond strength of metal, ceramic and composite brackets to enamel: An In vitro study
... available ceramic brackets rely solely on mechanical retention, using standard light or chemically cure adhesives, without the need for additional special bonding ...in ceramic brackets bonded ...
111
Evaluation of kinetic friction in monocrystalline ceramic, polycrystalline ceramic and composite brackets in dry and wet field
... orthodontics brackets although these offer little in terms of ...of ceramic brackets, superior esthetics are the only the advantage of the ceramic brackets and short comings include a ...
5
Frictional Resistance of Three Types of Ceramic Brackets
... conventional ceramic bracket had the highest frictional force at both wire ...of ceramic material provides a rougher surface impeding movement of the wire through the bracket ...a ceramic slot, would ...
7
Nonlinear axisymmetric response of thin FGM shallow spherical shells with ceramic-metal-ceramic layers under uniform external pressure and temperature
... This paper presents an analytical approach to investigate the nonlinear axisymmetric response of thin FGM shallow spherical shells with ceramic – metal – ceramic layers under uniform external ...
15
Evaluation of stresses developed in different bracket-cement-enamel systems using finite element analysis with in vitro bond strength tests
... A three-dimensional simplified FE model with the three loading modes (Figure 1) and the three different bracket materials of the bracket-cement-enamel systems was constructed using ANSYS 10.0 software (ANSYS Inc., ...
8
Comparison of Enamel Surfaces using Scanning Electron Microscope Following Debonding of Ceramic Brackets with Hard Tissue Laser (Erbium Doped Yttrium Aluminium Garnet) and Other Techniques: An Invitro study
... of ceramic brackets, a laser should be chosen that will directly affect the resin without conducting excessive ...for ceramic brackets 29 ...
123
Microstructural Characteristics and Mechanical Property of Aluminium Matrix Hybrid Composites Reinforced with Alumina and Graphite
... with ceramic particles are very promising materials for structural applications due to excellent combination of ...the ceramic reinforcements (high strength and high modulus) leading to a superior profile ...
6
Evaluation of shear bond strength of orthodontic brackets using trans-illumination technique with different curing profiles of LED light-curing unit in posterior teeth
... metallic brackets is limited to the edges of the bracket ...metallic brackets can be performed from mesial and distal aspects for 20 s each ...metallic brackets by Tavas and Watts in 1979 ...
5
Structural and Thermal Analysis of Metal Ceramic Disk Brake
... and metal-ceramic are carried ...the metal-ceramic is best as far as stiffness is concerned compared to the other material, grey cast ...
5
Effect of two different primers on the shear bond strength of metallic brackets to zirconia ceramic
... orthodontic brackets and dental zirconia ceramics using a new primer (Monobond Etch & Prime, Ivoclar Vivadent, Schaan, Principality of Liechtenstein) actually made for use in ceramic ...the ...
8
A Study on Knowledge, Perceptions and Attitudes about Screening and Diagnosis of Diabetes in Saudi Population
... Electronic search was performed in PubMed, Scopus and Ovid to identify in vitro studies that investigated zirconia-based Restorations. The search was carried out by the first two authors of this manuscript (A-S & ...
8
An Investigation of Ceramic-Metal Composite Using By Powder Metallurgy
... electrodeposited metal and micrometer-sized particles, has been of interest upto ...Generally, ceramic-metal composites are produced by conventional sintering methods, which are productive and ...
6