• No results found

POLY VINYL ALCOHOL PARTICLES

Effect of Poly Vinyl Acetate and Poly Vinyl Alcohol as Cement Admixture on Strength of Concrete

Effect of Poly Vinyl Acetate and Poly Vinyl Alcohol as Cement Admixture on Strength of Concrete

... e) Water flow between cement particles is restricted. f) Workability increased due to action of air bubbles as ball bearing which assist movement of particles each other E. Set-Accelerating Admixtures They ...

9

Poly(Vinyl Alcohol) Infiltrated Carbon Nanotube Carpets

Poly(Vinyl Alcohol) Infiltrated Carbon Nanotube Carpets

... the carbon source, camphor, are introduced into the reactor in a common gas mixture so that, in the presence of fresh catalyst particles, carbon decomposition remains active for longer periods of time. The ...

6

Preparation and characterisation of poly(ethylene terephthalate) and poly(vinyl alcohol)/clay nanocomposites

Preparation and characterisation of poly(ethylene terephthalate) and poly(vinyl alcohol)/clay nanocomposites

... Figure 3-59 Thermograms for PVOH/ Li+ MCBP (heated at 210 °C) nanocomposites with various clay loadings 3.5.3.2.2.4.3 Summary PVOH and Li+ MCBP (fired at 210 °C) could not be mixed as well as the clays with higher ...

341

Development Of Carbonated

Hydroxyapatite/ Poly(L-Lactide)/

Poly(Vinyl Alcohol) Biocomposites

Development Of Carbonated Hydroxyapatite/ Poly(L-Lactide)/ Poly(Vinyl Alcohol) Biocomposites

... Another biodegradable polymer which has been frequently studied and applied in several biomedical applications is poly(vinyl alcohol) (PVA). It is relatively low cost biodegradable polymer with good ...

43

Design and evaluation of nano-hydroxyapatite/poly(vinyl alcohol) hydrogels coated with poly(lactic-co-glycolic acid)/nano-hydroxyapatite/poly(vinyl alcohol) scaffolds for cartilage repair

Design and evaluation of nano-hydroxyapatite/poly(vinyl alcohol) hydrogels coated with poly(lactic-co-glycolic acid)/nano-hydroxyapatite/poly(vinyl alcohol) scaffolds for cartilage repair

... The results of cellular adhesion are shown in Fig. 2. The adhesion in the experimental groups was signifi- cantly higher than that in the control group (P < 0.05), while there were no statistical differences among the ...

9

Electrochemical synthesis of silver nanoparticles in poly(vinyl alcohol) solution

Electrochemical synthesis of silver nanoparticles in poly(vinyl alcohol) solution

... CONCLUSIONS In this work, an electrochemical procedure was employed for the production of Ag/PVA colloidal dispersions with different concentrations of PVA. It was found using UV–Vis spectroscopy, that increasing PVA ...

12

Thermoresponsive, well defined, poly(vinyl alcohol) co polymers

Thermoresponsive, well defined, poly(vinyl alcohol) co polymers

... the blood stream, but lipophilic to engage with and permeate though cellular membranes. Chilkoti et al. showed that LCST thermoresponsive polymers better penetrate tissues. 14 Gibson et al. have studied the interactions ...

10

Composite Gels Based on Poly (Vinyl alcohol) for Biomedical Uses

Composite Gels Based on Poly (Vinyl alcohol) for Biomedical Uses

... per hour) [Mi, F-L et al 2001]. Table 2 shows that the results obtained for PVA/bentonite hydrogels are in this range: in addition it is also possible to observe that the GF and M remain high, indicating the potentiality ...

8

The Use of Poly(vinyl alcohol)-based Hydrogels in Biomedical Applications

The Use of Poly(vinyl alcohol)-based Hydrogels in Biomedical Applications

... 37 the polymer. In a special case of drug delivery commonly known as “intelligent drug delivery”, the release of the drug into the bloodstream is triggered and controlled by various physiological stimuli. Currently, ...

58

Microrheology and microstructure of poly(vinyl alcohol)-based physical gels

Microrheology and microstructure of poly(vinyl alcohol)-based physical gels

... tracer particles in PVA solutions and PVA/PEG ...tracer particles over a wide range of time scales, while the use of video-based particle tracking allowed us to probe the inhomogeneity of the ...

208

Development of Polycaprolactone/Poly(Vinyl Alcohol)/Clay Microparticles by Spray Drying

Development of Polycaprolactone/Poly(Vinyl Alcohol)/Clay Microparticles by Spray Drying

... 4. Conclusion In this study, we obtained innovative microparticles of PCL/PVAL and PCL/PVAL/ NT-25, using emulsification techniques followed by spray drying. The DSC analysis showed a small variation in the Tg, but it ...

18

Mechanical reinforcement of electrospun poly(vinyl alcohol) by α‐FeOOH nanowires

Mechanical reinforcement of electrospun poly(vinyl alcohol) by α‐FeOOH nanowires

... neighbor-ing particles does not ...a-FeOOH particles are tightly packed into the PVA matrix and can thus be taken as a sign of an interphase region, ...

8

Preparation and characterization of nanofibrillated cellulose/poly (vinyl alcohol) composite films

Preparation and characterization of nanofibrillated cellulose/poly (vinyl alcohol) composite films

... However, brittleness and other properties such as low thermal stability, high flammability, medium gas barrier properties and low solvent resistance (e.g., against water) of the pure PVA are often insufficient for its ...

10

Synergistic and competitive aspects of the adsorption of Poly(ethylene glycol) and Poly(vinyl alcohol) onto Na Bentonite

Synergistic and competitive aspects of the adsorption of Poly(ethylene glycol) and Poly(vinyl alcohol) onto Na Bentonite

... An explanation which is consistent with the observed behavior is that the smaller PEG molecules are more mobile and adsorb rapidly to the clay mineral surface. Nelson and Cosgrove 26 have shown that PEG is able to ...

39

Highly thermally resistant, hydrophobic poly(vinyl alcohol)–silica hybrid nanofibers

Highly thermally resistant, hydrophobic poly(vinyl alcohol)–silica hybrid nanofibers

... Finally, in comparison with neat PVA nanofibers presented in the literature, the resulting PVA/silica nanofiber mats provide considerable superiority, such as improved thermal resistance, fiber quality and ...

13

The Impact of Clay Loading on the Relative Intercalation of Poly(Vinyl Alcohol) Clay Composites

The Impact of Clay Loading on the Relative Intercalation of Poly(Vinyl Alcohol) Clay Composites

... inorganic particles are the individual layers of a lamellar compound like smectite clay or a nanocomposite of a polymer (such as nylon) embed- ded among layers of silicates exhibit different physical ...

13

Effect of aspect ratio of graphene oxide on properties of poly (vinyl alcohol) nanocomposites

Effect of aspect ratio of graphene oxide on properties of poly (vinyl alcohol) nanocomposites

... of particles in GO-S was three times larger than that in GO-L, GO-S, which could produce more crazes than GO-L, resulting in the effective release of the strain energy together with the crack pinning in the ...

12

Addition Effect of Poly(N-Vinyl Pyrrolidone) on the Miscibility of Cellulose Acetate/Poly(Vinyl Alcohol) Blends

Addition Effect of Poly(N-Vinyl Pyrrolidone) on the Miscibility of Cellulose Acetate/Poly(Vinyl Alcohol) Blends

... 8 Schematic representation of interfacial distribution of (a) PVP-L and (b) PVP-H chains in the ternary system of CA/PVA/PVP; the former represents an immiscible blend of CA/PVA/P[r] ...

8

The viscoelastic response of electrospun poly(vinyl alcohol) mats.

The viscoelastic response of electrospun poly(vinyl alcohol) mats.

... A B S T R A C T Native biological tissues are viscoelastic materials that undergo time-dependent loading in vivo. It is therefore crucial to ensure that biomedical materials have a suitable viscoelastic response for a ...

6

Functionalized Antimicrobial Electrospun Poly
(vinyl alcohol) Nanowebs

Functionalized Antimicrobial Electrospun Poly (vinyl alcohol) Nanowebs

... Reputex™ 20 is a 20% poly(hexamethylene biguanide)hydrochloride solution [21]. The objective of this study is to fabricate and characterize PVA nanofibers functionalized with Repute[r] ...

8

Show all 10000 documents...

Related subjects