pulsed laser ablation-deposition
The deposition and characterisation of metallic thin films and magnetic multilayers prepared by pulsed laser ablation deposition
... Initial work focuses on the effects of the laser wavelength and the laser pulse temporal profile on the deposition rates of nickel and silver and the droplet numbers deposited on to film[r] ...
213
Nanosize Particles of ZrVFe Alloy by Pulsed Laser Ablation in Ethanol
... Various ablation techniques have been utilized for small particle ...The Pulsed Laser ablation Deposition (PLD) is one of the major fields that applied laser ablation ...
5
Pulsed laser ablation and deposition of magnetic materials
... the deposition rate and substrate tem perature to the density o f ...increasing deposition rate or decreasing substrate temperature, are the same as those calculated and observed for three-dim ensional ...
186
Femtosecond pulsed laser deposition of silicon thin films
... the deposition parameters. A key obser- vation for the ablation of Si in either Ar or 4% H in Ar is that the addition of hydrogen to the argon gas consid- erably reduces the surface roughness and the ...
6
Modeling of pulsed laser ablation of aluminum under the action of infrared nanosecond laser pulses
... of pulsed laser ablation in production of nanomaterials and clusters, pulsed laser deposition, spectroscopy, laser micromachining, chemical analysis ...[1]–[3]. ...
6
Superconducting MgB2 thin films by pulsed laser deposition
... by pulsed laser deposition were annealed at 900 °C with excess ...involving ablation from a stoichiometric target under different growth conditions, as well as multilayer deposition ...
6
Hybrid Laser Technology for Creation of Doped Biomedical Layers
... the laser techniques such as laser ablation, surface modification, laser induced forward transportation (LIFT) and Laser chemical vapor deposition (LCVD) are ...the laser ...
7
Pulsed laser deposition of electronic materials
... optimum deposition parameters for the growth o f highly oriented films with smooth surfaces were found to be, a short laser wavelength (in the ...a deposition time corresponding to a film thickness o ...
192
Review of Graphene Growth From a Solid Carbon Source by Pulsed Laser Deposition (PLD)
... and is consequently not suitable for scaling up and for industrial production. Though large-area graphene can be achieved by epitaxial growth on SiC, synthesis and the subsequent transfer (Xu et al., 2014) of graphene to ...
18
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
... Adding a background atmosphere of oxygen gas has proven to allow additional control over the fi lm's oxygen content and also crystallisation structure [6,7]. The plasma plume from the laser ablation travels ...
8
Pulsed laser deposition of electronic ceramics and analysis of the ablation plume
... the ablation plume in an oxygen environment increases with distance from the target, (Amoruso et a! - 1995, Morrow et a! - 1994) and also that the gas phase ionisation occurs outside the area in which high energy ...
185
Pulsed laser ablation and deposition of electronic materials
... During ablation in vacuum, the oxygen atoms are supplied only by the ablated target, and there is little attenuation of the plume ...during ablation in an oxidising medium, as is the case for YBCO ...
232
Synthesize of crumb rubber using pulsed laser ablation in liquid
... teknologi laser diperkenalkan sebagai alternatif kepada teknik pemprosesan mekanikal pengisaran dan ...diterokai. Laser denyut Nd:YAG nano-saat dengan panjang gelombang 1064 nm digunakan sebagai sumber ...
38
Continuous trench, pulsed laser ablation for micro machining applications
... for pulsed laser ...the pulsed laser ablation process, a crucial first step on the path to support the generation of freeform ...
44
Pulsed laser deposition growth of bismuth oxide superconductors
... film deposition techniques Pulsed laser deposition (PLD) technique has overcome many of the challenges involved in depositing thin films of high temperature superconductors ...
221
Dynamics of the plume produced by nanosecond ultraviolet laser ablation of metals
... of deposition for a number of metals covering a wide range of volatility and atomic ...circular laser beam spot and a fluence of 2 J/cm 2 ...total ablation yield is strongly dependent on the ...the ...
5
Studies on Cu2SnS3 thin films: Review
... highlighted some important findings such as surface area (2.1 m 2 /g), morphology (spherical grains) and structure (formation of triclinic). The influence of annealing treatment was studied by Aykut (2017). The structure ...
8
Dielectric solid state planar waveguide lasers: a review
... and laser materials that suffer re-absorption at the emission wavelength, such as (quasi) three-level transitions, or similarly ones with weak stimulated emission cross-section ...the laser cavity may be ...
13
Nonstoichiometric Titanium Oxides via Pulsed Laser Ablation in Water
... nonstoichiometry when fabricated by specified laser parameters denoted as 1, 2, 3, and 4 (cf. Table 1). The phases remained unchanged despite a much higher assembly/sedimentation rate for samples 3 and 4 than 1 ...
14
Manuscript Title & Authors
... Phase Pulsed Laser Ablation [9], would affect the size dependent optical properties of the silicon ...Phase Pulsed Laser Ablation as a viable mean of upgrading the properties of ...
5