pulsed laser deposition
Pulsed laser deposition of single crystalline Cu7In3/CuIn0 8Ga0 2Se2 core/shell nanowires
... the pulsed-laser deposition (PLD) is a more proper alternative to prepare multiple ...the pulsed laser will migrate on the substrate surface and make the low temperature of bulk ...
6
Investigation of the Dependence of Thickness and Roughness of TiO2 Thin Films Fabricated Using Pulsed Laser Deposition on the Laser Energy
... vapor deposition techniques (CVD/PVD), sol-gel methods, photo- deposition, pulsed laser deposition (PLD) and e-beam evaporation [14-16], PLD used in this work represents one of the ...
5
Superconducting MgB2 thin films by pulsed laser deposition
... by pulsed laser deposition were annealed at 900 °C with excess ...multilayer deposition involving interposed Mg layers were examined and ...
6
Growth of nanolaminate structure of tetragonal zirconia by pulsed laser deposition
... Pulsed laser deposition (PLD) is quite easy to produce multilayer films composed of two or more materials. One of the major advantages is that the stoichiometry of the target can be retained in the ...
7
Design and Fabrication of Anti Reflection Coating by Pulsed Laser Deposition
... In this work design and fabricated antireflection coating with single layer is discussed. The fabrication of antireflection coating is achieved using pulsed laser deposition technique (PLD) which ...
12
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
... vapour deposition (CVD), molecular beam epitaxy (MBE), magnetron plasma sputtering, and pulsed laser deposition (PLD) have all successfully been applied to fab- ricate ZnO fi lms with ...
8
Pulsed laser deposition of thick multilayer garnet crystal films for waveguide laser devices
... of pulsed laser deposition (PLD) to fabricate thick multilayered garnet crystal planar waveguides with rare-earth ion doped cores for use as planar waveguide laser ...diode laser ...
213
Electrochemical Properties of LiNi0.50Co0.25Mn0.25O2 Thin Film Cathodes Prepared by Pulsed Laser Deposition
... Keywords: LiNi0.50Co0.25Mn0.25O2, Thin film electrode, Lithium ion batteries, Electrochemical performance, Pulsed laser deposition 1.. INTRODUCTION LiCoO2 cathode material has been widel[r] ...
8
Fabrication of carbon thin films by pulsed laser deposition in different ambient environments
... The carbon thin films are successfully grown under different ambient environment (Air, He and Ar) and different ambient pressures (60, 160 500 and 1000mbar) by pulsed laser deposition technique. The ...
6
Characterization of Ferroelectric NaxK1 xNbO3 System Films Prepared by Pulsed Laser Deposition
... Pulsed laser deposition has been widely applied for preparation of many kinds of thin films due to several advantages, i.e., stoichiometric transfer of compositions from source to film, growth from a ...
6
Spectroscopic Study of Titanium Dioxide Thin Films Prepared by Pulsed Laser Deposition
... Many deposition methods have been used to prepare titanium ...[18], Pulsed Laser Deposition (PLD)[17], and chemical methods (such as spin coating sol-gel precursors [15], and Chemical Vapour ...
6
The Influence of the Number of Laser Pulses on the Thickness and Roughness of TiO2 Thin Films Fabricated Using Pulsed Laser Deposition
... by pulsed laser deposition technique (PLD) using a Q- switched Nd: YAG ...of laser pulses (5, 10 and 15 pulses) with the same pulse energy (150 mJ) and same Repetition rate (10 ...of ...
6
Review of Graphene Growth From a Solid Carbon Source by Pulsed Laser Deposition (PLD)
... vapor deposition (CVD), mechanical exfoliation, decomposition of SiC, liquid-phase exfoliation, pulsed laser deposition ...including deposition processes and ...
18
A Nanocrystalline Fe2O3 Film Anode Prepared by Pulsed Laser Deposition for Lithium Ion Batteries
... by pulsed laser deposition or sputtering can also exhibit an excellent electrochemical performance due to the enhanced electrical contact between the substrates and active materials, the short- ened ...
7
Investigation of nanosecond and femtosecond pulsed laser deposition and application of some metal nanoparticle films
... EXPERIMENTAL SETUP AND CHARACTERIZATION TECHNIQUES 63 3.1 Laser and vacuum system for nanosecond and femtosecond pulsed laser deposition 63 3.1.1 Nanosecond PLD setup 64 3.1.2 Femtosecon[r] ...
278
Growth of a multilayer garnet crystal double clad waveguide structure by pulsed laser deposition
... A double-clad waveguide structure has been fabricated by sequential pulsed laser deposition of YGG, Nd,Cr:GSGG, YGG and YAG on a YAG substrate. The layers, all of around 1 µm in thickness, were found ...
22
Thermoelectric Properties of Amorphous Zinc Oxide Thin Films Fabricated by Pulsed Laser Deposition
... Thermoelectric properties of non-doped amorphous zinc oxide (ZnO) thin film were studied at between room temperature and around 673 K, where the samples were prepared by pulsed laser deposition at ...
6
Study on Fabrication of Titanium Oxide Films by Oxygen Pressure Controlled Pulsed Laser Deposition
... atmosphere-controlled pulsed laser deposition (ACPLD) technique for producing titanium compound films has been successfully demonstrated in the present ...
5
Selective detection of naphthalene with nanostructured WO 3gas sensors prepared by pulsed laser deposition
... Pulsed laser deposition is a method for depositing a vari- ety of materials ranging from epitaxial thin films (Hussain et ...other deposition methods, for example easily controllable film ...
10
Structure and composition of layers of Ni-Co-Mn-In Heusler alloys obtained by pulsed laser deposition
... Abstract. In present work we were analysing thin layers of Ni-Co-Mn-In alloys, grown by pulsed laser deposition method (PLD) on Si, NaCl and glass substrates. For target ablation the second harmonics ...
7