• No results found

Self-etch adhesives

An Evaluation on the Effect of 2% Chlorhexidine Digluconate on Microtensile Bond Strength of Ultramild Self Etch Adhesives.

An Evaluation on the Effect of 2% Chlorhexidine Digluconate on Microtensile Bond Strength of Ultramild Self Etch Adhesives.

... the self-etch ...of self-etch adhesives and the major shortcomings of the most simple-to-use one-step (self-etch) ...the self etch ...these self ...

87

Shear Bond Strength of Two Self-Etch Adhesives to Permanent and Deciduous Dental Enamels: Effect of Acid Preconditioning

Shear Bond Strength of Two Self-Etch Adhesives to Permanent and Deciduous Dental Enamels: Effect of Acid Preconditioning

... standard” self-etch adhesive [14] and this is the reason why it has been used as the control adhesive in this ...two-step self-etch adhesives such as CSEB, because the resin layer is ...

8

Comparison of the Dentin Bond Strength of two Self-Etch Adhesives after Prolonged Air-Drying and Additional Light-Curing

Comparison of the Dentin Bond Strength of two Self-Etch Adhesives after Prolonged Air-Drying and Additional Light-Curing

... of self-etch adhesives results in an increase in the polymerization degree, decreased permeability, and improved mechanical properties of the adhesive layer, all of which can improve the ...

7

Effect of cleansing solutions on the bond strengths of self-etch adhesives to saliva-contaminated dentin

Effect of cleansing solutions on the bond strengths of self-etch adhesives to saliva-contaminated dentin

... of self-etch adhesives, although we were also unable to determine if chlorhexidine would improve the bond strengths of self-etch ...

44

Effect of Self-etch Adhesives on Self-sealing Ability of High-Copper Amalgams

Effect of Self-etch Adhesives on Self-sealing Ability of High-Copper Amalgams

... some self-etch adhesives as a liner beneath the high-copper amalgam restorations may in- crease interfacial corrosion potential and self-sealing ability of high-copper amalgams by increasing ...

8

The Effect of Epigallocatechin Gallate on the Dentin Bond Durability of Two Self-etch Adhesives

The Effect of Epigallocatechin Gallate on the Dentin Bond Durability of Two Self-etch Adhesives

... of water derived from water sorption by hydrophilic adhesives. [3] In this study, we used two types of two- step self-etch adhesives. Clearfil SE Bond was chosen because it had functioned well ...

7

Knoop Hardness of Self-Etch Adhesives Applied on Superficial and Deep Dentin

Knoop Hardness of Self-Etch Adhesives Applied on Superficial and Deep Dentin

... tioned interaction might proceed to a second step in the presence of external additives such as HAP. This com- pound decomposes amine-acid complex and releases amine co-initiator to trigger spontaneous polymerization ...

6

Influence of light-curing distance on degree of conversion and cytotoxicity of etch-and-rinse and self-etch adhesives

Influence of light-curing distance on degree of conversion and cytotoxicity of etch-and-rinse and self-etch adhesives

... respective adhesives where applied on dentin discs as this reflects the clinical situation as close as ...e.g. adhesives exposed cell culture media to the respective materials light-cured in vials [40, 41], ...

10

One step partial or complete caries removal and bonding with antibacterial or traditional self etch adhesives: study protocol for a randomized controlled trial

One step partial or complete caries removal and bonding with antibacterial or traditional self etch adhesives: study protocol for a randomized controlled trial

... AA, antibacterial adhesive; ANSM, Agence Nationale pour la Sécurité du médicament et des Produits de Santé (French National Agency for Medicines and Health Products Safety); C, complete excavation; CNIL, Comité National ...

10

Assessment of the Shear Bond Strength between Nanofilled Composite Bonded to Glass-ionomer Cement Using Self-etch Adhesive with Different pHs and Total-Etch Adhesive

Assessment of the Shear Bond Strength between Nanofilled Composite Bonded to Glass-ionomer Cement Using Self-etch Adhesive with Different pHs and Total-Etch Adhesive

... with self- etch system has been suggested. Since the self-etch sys- tem has less technique sensitivity, it can mostly meet the dentists’ need for using sandwich ...The self-etch ...

6

Shear Bond Strength of Composite to Primary Enamel Treated with Casein Phosphopeptide Amorphous Calcium Phosphate Using Total-Etch and Self-Etch Bonding Systems

Shear Bond Strength of Composite to Primary Enamel Treated with Casein Phosphopeptide Amorphous Calcium Phosphate Using Total-Etch and Self-Etch Bonding Systems

... of self-etch adhesives after the use of GC Tooth Mousse ...and self- etch adhesives after bleaching and treatment with CPP-ACP and showed that self-etch ...

7

Effect of Dimethyl Sulfoxide on Bond Strength of a Self-Etch Primer and an Etch and Rinse Adhesive to Surface and Deep Dentin

Effect of Dimethyl Sulfoxide on Bond Strength of a Self-Etch Primer and an Etch and Rinse Adhesive to Surface and Deep Dentin

... and self-etch adhesives, with higher bond strength for either total-etch [39] or self-etch [40] adhe- ...to self-etch systems like ...

8

Effect of Amalgam Corroded Products on Quality of Hybrid Layer Using Etch and Rinse and Self-etch Adhesive Systems

Effect of Amalgam Corroded Products on Quality of Hybrid Layer Using Etch and Rinse and Self-etch Adhesive Systems

... between self-etch and total etch adhesives with regard to bonding to discolored dentin, these results were contradicted with our results, as in our study bonding with total etch ...

7

An in Vitro Comparison of Bonding Effectiveness of Different Adhesive Strategies on Erbium:Yttrium Alluminum Garnet Laser Irradiated Dentin

An in Vitro Comparison of Bonding Effectiveness of Different Adhesive Strategies on Erbium:Yttrium Alluminum Garnet Laser Irradiated Dentin

... with etch and rinse adhesive systems or self-etch adhesive systems, glass-ionomer cement and self-adhesive resin ...the etch and rinse system, Er:YAG laser ablation creates a smear ...

11

Microshear Bond Strength of Scotchbond Universal Adhesive to Primary and Permanent Dentin: A Six-Month In Vitro Study

Microshear Bond Strength of Scotchbond Universal Adhesive to Primary and Permanent Dentin: A Six-Month In Vitro Study

... non-rinsing adhesives, commonly known as self-etch or etch-and-dry systems, have simplified the concept of dentin ...bonding. Self-etch systems, compared to etch- ...

8

Strength and Durability of a New Adhesive Bond to Superficial 
Dentin Using Etch and Rinse and Self-Etch Systems: 
An In Vitro Study

Strength and Durability of a New Adhesive Bond to Superficial Dentin Using Etch and Rinse and Self-Etch Systems: An In Vitro Study

... of etch and rinse adhesive systems [7]. In self-etch adhesives, depth of dentin demineralization and penetration depth of resin monomers may not match, which is due to the simultaneous ...

6

Effect of Lactic Acid on Microleakage of Class V Low-Shrinkage Composite Restorations

Effect of Lactic Acid on Microleakage of Class V Low-Shrinkage Composite Restorations

... two-step self-etch adhesives, phosphate or carboxylate groups present in monomers form a chemical bond with the residual hydroxyapatite crystals in dentin collagen network, reinforcing long-term ...

8

Marginal Micro-leakage of Self-etch and All-in One Adhesives to Primary Teeth, with Mechanical or Chemo-Mechanical Caries Removal

Marginal Micro-leakage of Self-etch and All-in One Adhesives to Primary Teeth, with Mechanical or Chemo-Mechanical Caries Removal

... Based on the limitation of this study, the results showed that the use of Carisolv doesn’t adversely affect the micro-leakage of composite restorations while using self-etch adhesives. The ...

6

Effect of Chlorhexidine and Cystatin Incorporated Adhesives on MMPs and Cysteine Cathepsin-An In-vitro Zymographic Analysis

Click here to download PDF version of the article !

... for self-etch adhesives because of the concurrent demineralization and infiltration ...total etch and self-etch adhesives to evaluate the presence of MMPs and cysteine ...

5

Comparative evaluation of degree of conversion of Etch-and-Rinse and Self-etch adhesive systems using QTH and led light curing units: An In vitro study

Comparative evaluation of degree of conversion of Etch-and-Rinse and Self-etch adhesive systems using QTH and led light curing units: An In vitro study

... step self-etch adhesive ...the self-etch adhesives, the acid base resistant zone is formed which is mechanically, biologically and chemically more resistant than normal dentin, referred ...

97

Show all 10000 documents...

Related subjects