• No results found

transmission line parameters analysis

Computer Aided Analysis and Design of EHV-AC Transmission line

Computer Aided Analysis and Design of EHV-AC Transmission line

... of transmission line design involves tedious calculation and relies on the knowledge and experience of ...of transmission line gives faster result and wide vision of the probable ...design ...

7

Optimal Electric Wave Propagation Parameters on a Transmission Line --- Schottky Diode System

Optimal Electric Wave Propagation Parameters on a Transmission Line --- Schottky Diode System

... microstrip line. For purpose of wave propagation analysis the line is L = 10 cm long to highlight stationary waves in the [500 MHz–3 GHz] frequency ...

8

Analysis of six phase system for transmission line

Analysis of six phase system for transmission line

... III. Parameters for Test System III acquired from Tenaga Nasional Berhad (TNB), Johor Bahru Selatan, Malaysia which is Gelang Patah­Tanjung Kupang Johor's ...

8

Comparative Analysis of STATCOM and SVC Operation in Electric Transmission Line

Comparative Analysis of STATCOM and SVC Operation in Electric Transmission Line

... the parameters to improve system performance by using placement and coordination of multiple FACTS controllers in large-scale emerging power system networks to also show that the achieve significant improvements ...

7

Investigating the Impacts of Meteorological Parameters on Electromagnetic Environment of Overhead Transmission Line

Investigating the Impacts of Meteorological Parameters on Electromagnetic Environment of Overhead Transmission Line

... meteorological parameters along the lines are considered, and the analysis method of meteorological parameters impacting the electromagnetic environment is ...between line parameters ...

9

Transmission Line Fault Detection using BFONN

Transmission Line Fault Detection using BFONN

... on transmission line current and voltage ...Accurate transmission line parameters can build an accurate grid model which can be used in state estimation, fault analysis and relay ...

8

Optimization of Transmission Line Towers: P-Delta Analysis

Optimization of Transmission Line Towers: P-Delta Analysis

... circuit transmission line tower is considered, for optimizing the structure with respect to yield strength of the tower member as variable ...structural analysis software to obtain the optimum design ...

7

Transmission Line Theory and Thermal Analysis of Coaxial Coupler for TWTs

Transmission Line Theory and Thermal Analysis of Coaxial Coupler for TWTs

... or analysis of MSCC [7–9], different commercially available software packages, namely, CST microwave studio [10] and HFSS [11], take very long time and use fixed Z L ...

8

A Study On Analysis Of Transmission Line Tower And Design Of Foundation

A Study On Analysis Of Transmission Line Tower And Design Of Foundation

... The Transmission line towers are one of the important life line structures in the distribution of power from the source to the various places for several ...constant parameters such as height, ...

11

Analysis of Strain Clamp Failure on 500 kV Transmission Line

Analysis of Strain Clamp Failure on 500 kV Transmission Line

... DOI: 10.4236/msce.2018.64007 48 Journal of Materials Science and Chemical Engineering The primary aim of this study is to investigate the main reasons for the brea- kage of 500 kV transmission line. The ...

10

Stability Analysis of AC Transmission Line Using UPFC at Different Lengths of Transmission Line

Stability Analysis of AC Transmission Line Using UPFC at Different Lengths of Transmission Line

... calculation, line losses, reactive power and active power and power factor comparison Unified Power Flow Controller ...of transmission line using UPFC to improve the real and reactive power flow ...

7

Targeted mutagenesis: analysis of phenotype without germ line transmission

Targeted mutagenesis: analysis of phenotype without germ line transmission

... Although the use of compromised embryos as chimeric part- ners can be a powerful way of analyzing lineage-specific de- fects, the generation of chimeras between mutant ES cells and normal diploid wild-type embryos has ...

7

Three Phases Fault Analysis in Transmission Line Using UPFC

Three Phases Fault Analysis in Transmission Line Using UPFC

... In this paper analyse well regulated power flow between the Bus systems so as to maximize the power quality by minimizing the losses and improving the power transfer capability of system by use of FACTS devices. ...

10

The physical meaning of transmission-line parameters in a full-wave theory

The physical meaning of transmission-line parameters in a full-wave theory

... the line parameters lose their direct physical meaning and are gauge ...the parameters are composed of combinations of capacitances and induc- tances for forward and backward running ...

10

Analysis of Micro-Grid System during Faults on Transmission Line

Analysis of Micro-Grid System during Faults on Transmission Line

... Same as fault current supplied by the source and line current is also analysed, when phase A to Ground fault is created at F3 location for the both mode of operation.Change in fault current supplied by the DG-2 is ...

7

Development of a Fuzzy Controller with UPFC’s For Damping of Oscillation in Multi-machine Integrated Power System

Development of a Fuzzy Controller with UPFC’s For Damping of Oscillation in Multi-machine Integrated Power System

... AC Transmission Systems, is defined as “alternating current transmission systems incorporating power electronics based and other static controllers to enhance controllability and power transfer ...on ...

6

Develop A 5.8ghz Antenna Using Microstrip Technologies

Develop A 5.8ghz Antenna Using Microstrip Technologies

... lines of the antenna itself. This topic is more specific where it is only explain on the microstrip antenna. It is also shows on designing an antenna. The design is focus on the patch antenna and transmission ...

24

Power Cable Joint Model: Based on Lumped Components and Cascaded Transmission Line Approach

Power Cable Joint Model: Based on Lumped Components and Cascaded Transmission Line Approach

... correction parameters are obtained in such a way that maximum repetition of the S-parameters phase from -π to π is achieved, since the repetition phase indicates a cascaded transmission line ...

17

A Review Paper on Power Quality Improvement and Mitigation Case Study Using Distributed Power Flow Controller

A Review Paper on Power Quality Improvement and Mitigation Case Study Using Distributed Power Flow Controller

... According to growth of electricity demand and the increased number of non-linear loads in power grids, providing a high quality electrical power should be considered. In this paper, voltage sag and swell of the power ...

5

Transmission Line for Broadcast Applications

Transmission Line for Broadcast Applications

... The average power rating is determined by the amount of heat created due to line losses. The amount of heat, or temperature rise, is primarily limited by the safe, lifetime performance of the dielectric material ...

5

Show all 10000 documents...

Related subjects