[PDF] Top 20 MERLIN LEGEND Communications System Direct-Line Consoles Operator’s Guide

... The telephone can be hazardous if immersed in water. To avoid the possibility of electrical shock, do not use it when you are wet. If you accidentally drop it into water, do not retrieve it until you have first unplugged ... See full document

... Forward and Follow Me send your calls to another phone. Use Forward at your own extension and Follow Me at another extension where you want to receive calls. Both can be canceled at either phone. If Delayed Call ... See full document

... The Agent Status Control feature uses three buttons on the CMS supervisor’s telephone to let the CMS supervisor change the status of CMS agent tele- phones. The three buttons are Make Available (Operator ESS2), ... See full document

... Must be programmed on a button. To program: See Programming Buttons & Settings, p. 20. This feature prevents calls from ringing at your extension, although outside calls cause the green lights at line buttons ... See full document

... the system can be set up so that calling group calls waiting in queue can be sent to another calling group or to the system operator in systems with ... See full document

... the MERLIN LEGEND system Group Page feature to ask the agents in some splits to touch the Available button on their telephones to signal they are available to begin answering ...a line group ... See full document

... the MERLIN Attendant should be done from a single-line Touch-Tone ...a MERLIN LEGEND system ‘voice terminal) that is connected to the MERLIN LEGEND system control ... See full document

... data communications, and Group IV (G4) fax machines are supported through digital Basic Rate Interface (BRI), T1 Switched 56, or Primary Rate Interface (PRI) lines (see “Modules Supporting Lines/Trunks” on page ... See full document

... (outside line) to access PRI services, your dial-out code would be a DSO channel number (for example, 801, 802, ...your system manager for your dial-out code or the appropriate channel number to use in ... See full document

... data communications, and Group IV (G4) fax machines are supported through digital Basic Rate Interface (BRI), T1 Switched 56, or Primary Rate Interface (PRI) lines (see “Modules Supporting Lines/Trunks” on page ... See full document

... your MERLIN LEGEND system is in PBX ...automatic line selection to an Intercom button or an SA button, you have the ability to make both internal and external calls via ...The System ... See full document

... telephone system, you should be aware that there exists an increasing problem of telephone toll ...else’s line, and breaking into someone else’s telephone equipment physically or ... See full document

... an operator, and cancel the operator message delivered to a display ...a MERLIN II System Display Console, you can make sure you do not turn off a message light that was turned on by another ... See full document

... Your system might have a few line buttons programmed as operator feature ...These operator-specific features are used to turn on a co-worker’s message light, leave a message on a display ... See full document

... The MERLIN Attendant will not answer calls while it is out of ...The line will continue to ring until the receptionist answers or the caller hangs ... See full document

... a system that includes a CTI link; using the calling party number as a database key code, information about a caller automatically appears on the user’s computer screen when the call arrives at the ...on ... See full document

... telecommunications system by an unauthorized party—for example, persons other than your company’s employees, agents, subcontractors, or persons working on your company’s ...telecommunications system, and, ... See full document

... only, MERLIN LEGEND Communications Systems can be networked with one another or with DEFINITY ® Enterprise Communications Server (ECS) and ProLogix ™ Communications Systems in private ... See full document

... Communications System to the central office. Technically, a line is a loop-start facility or a communications path that does not connect two switches (for example, an intercom line or a ... See full document

... This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful ... See full document