• No results found

[PDF] Top 20 Printed Drop Shaped Monopole Antenna

Has 10000 "Printed Drop Shaped Monopole Antenna" found on our website. Below are the top 20 most common "Printed Drop Shaped Monopole Antenna".

Printed Drop Shaped Monopole Antenna

Printed Drop Shaped Monopole Antenna

... the antenna that would operate in an UWB device must be highly efficient so as to minimize the ...the antenna unit in these devices must be small and ... See full document

5

A Novel Maple-Leaf Shaped UWB Antenna with a 5.0-6.0 GHz
 Band-Notch Characteristic

A Novel Maple-Leaf Shaped UWB Antenna with a 5.0-6.0 GHz Band-Notch Characteristic

... maple-leaf shaped printed monopole antenna for UWB applications has been designed and ...The antenna impedance bandwidth with reflection coefficient less than −10 dB is more than 10 GHz ... See full document

11

A Penta-Band Printed Monopole Antenna for MIMO Applications

A Penta-Band Printed Monopole Antenna for MIMO Applications

... MIMO antenna composed of two closely arranged symmetric monopole antennas with edge-to-edge distance of ...E-shaped printed monopole antenna loaded with two U-shaped ... See full document

14

Compact Microstrip-Fed Antenna for Ultra-Wideband Applications

Compact Microstrip-Fed Antenna for Ultra-Wideband Applications

... novel printed monopole antenna for ultra-wideband (UWB) applications is presented, which is composed of wide slot and Y-shaped microstrip feed line with a pair of inverted-L-shaped ... See full document

6

Gamma shaped monopole patch antenna for tablet PC

Gamma shaped monopole patch antenna for tablet PC

... (monopole shaped liked Gamma) shaped monopole improved antenna and presented in ...Gamma shaped monopole antenna having internal printed matching circuit for ... See full document

5

A Novel Tri-Band Printed Monopole Antenna with an Etched ∩-Shaped Slot and a Parasitic Ring Resonator for WLAN and WiMAX
 Applications

A Novel Tri-Band Printed Monopole Antenna with an Etched ∩-Shaped Slot and a Parasitic Ring Resonator for WLAN and WiMAX Applications

... tri-band printed monopole antenna with an etched ∩-shaped slot on the radiation patch and a parasitic ring resonator on the back- side of the radiation patch for WLAN/WiMAX applications has ... See full document

8

Numerical and Experimental Investigation of a Novel Ultrawideband Butterfly Shaped Printed Monopole Antenna with Bandstop Function

Numerical and Experimental Investigation of a Novel Ultrawideband Butterfly Shaped Printed Monopole Antenna with Bandstop Function

... the antenna radiation ...the antenna operating ...of antenna parameters on its performance, parametric studies have been numerically calculated for annular slot rings inner and outer radii r 1 and r ... See full document

11

Design of Compact Dual-band and Tri-band Microstrip Patch Antennas

Design of Compact Dual-band and Tri-band Microstrip Patch Antennas

... fork-shaped monopole antenna and are namely mender fork-shaped antenna (MFA), spiral fork-shaped antenna (SFA) and double SFA ...are printed on FR4 substrate and ... See full document

9

Inkjet Printing of a 20 GHz
 Coplanar Waveguide Monopole Antenna Using Copper Oxide Nanoparticles on Flexible Substrates: Effect of DROP Spacing on Antenna Performance

Inkjet Printing of a 20 GHz Coplanar Waveguide Monopole Antenna Using Copper Oxide Nanoparticles on Flexible Substrates: Effect of DROP Spacing on Antenna Performance

... feed monopole antennas printed on the flexible substrates Polyethylene Terephthalate (PET) and on Epson paper were designed for operating at 20 ...with drop spacings from 15 µ m to 35 µ m was ... See full document

9

A Modified Avian Egg Shaped CPW Fed Printed Monopole for SWB Applications

A Modified Avian Egg Shaped CPW Fed Printed Monopole for SWB Applications

... patch antenna with coplanar waveguide (CPW) feed is ...egg shaped antenna has been designed and implemented on FR4 substrate with the dimensions 30mm x ...1.6mm.The antenna with geometry ... See full document

7

Design of an 868 MHz Printed S Shape Monopole Antenna

Design of an 868 MHz Printed S Shape Monopole Antenna

... s-shaped printed circuit board (PCB) mono- pole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz; acceptable in 915 MHz as ...normal monopole ... See full document

7

Wideband printed monopole antenna for application in
wireless communication systems

Wideband printed monopole antenna for application in wireless communication systems

... the antenna design concept. The initial antenna design starts from ...patches, Antenna#2 is formed to improve the radiation characteristics of ...the Antenna#2, then three split-ring ... See full document

11

A Compact Printed Seven-Band Monopole Antenna for Vehicle-Mounted T-Box

A Compact Printed Seven-Band Monopole Antenna for Vehicle-Mounted T-Box

... C-shape monopole branch with an L-shaped ...C-shape monopole nearly covers three-quarter of the none-ground’s margin, and an L-shaped slot is also embedded in the monopole to extend ... See full document

7

A PRINTED MIMO/DIVERSITY MONOPOLE ANTENNA FOR UWB APPLICATIONS

A PRINTED MIMO/DIVERSITY MONOPOLE ANTENNA FOR UWB APPLICATIONS

... The simulated and measured far-field radiation patterns are as shown in Figure 3. The comparison between simulated and measured radiation patterns is shown at 2 different frequencies falling in the bandwidth of the ... See full document

8

ACS-Fed Wide Band Antenna with L-Shaped Ground Plane for 5.5 GHz
 WLAN Application

ACS-Fed Wide Band Antenna with L-Shaped Ground Plane for 5.5 GHz WLAN Application

... wide-band monopole antenna with modified L- shaped ground plane for WLAN applications is ...proposed antenna operates at ...The antenna has an overall dimension of only 21 × 7.35 mm 2 ... See full document

6

A Compact Flexible Printed Monopole Antenna with Embedded Periodic h
-Shaped Slots for WLAN Applications

A Compact Flexible Printed Monopole Antenna with Embedded Periodic h -Shaped Slots for WLAN Applications

... Recently, metamaterial has been widely used to design compact antennas [18–20]. In [21], transmission line metamaterial (TL-MTM) provides a design method for realizing compact antennas. However, the bandwidth of a ... See full document

7

Design & Analysis of Miniaturized Asymmetric Coplanar Strip Fed Antenna for Multi-Band WLAN/WiMAX
 Applications

Design & Analysis of Miniaturized Asymmetric Coplanar Strip Fed Antenna for Multi-Band WLAN/WiMAX Applications

... an antenna element in all modern communication devices (like mobile phones, portable laptops and handheld electronic ...an antenna that supports ...of printed multi-band antennas have been reported, ... See full document

13

Broadbanding of Printed Bell-Shaped Monopole Antenna by Using Short Stub for UWB Applications

Broadbanding of Printed Bell-Shaped Monopole Antenna by Using Short Stub for UWB Applications

... proposed antenna acquires a broadband characteristic that satisfies the required frequency band of the UWB ...proposed antenna can improve the impedance matching in the low frequency band ... See full document

11

Printed Leaf Shaped Monopole Antenna

Printed Leaf Shaped Monopole Antenna

... A printed antenna that has a shape of a leaf belonging to the class of printed monopole antenna was ...proposed antenna is compact (40mm×40mm) and hence can be incorporated into ... See full document

8

Compact Dual Band Printed 2.5-Shaped Monopole Antenna for WLAN Applications

Compact Dual Band Printed 2.5-Shaped Monopole Antenna for WLAN Applications

... (electrical) antenna size ...the antenna [30]. Thus, the design procedure of the antenna is a compromise between the above three conflicting ... See full document

12

Show all 10000 documents...