FEATURE DATA (0/1)
BASIC SERVICE: 502-599
: Default
BASIC SERVICE SETTING DATA
502 Name display on the called station when calling from Sub Line 0 1
Name display of My Line Name display of Sub Line Calling Party Name sending to ISDN when making an outgoing
call from Sub Line
0 1
Name of My Line Name of Sub Line
NOTE: In other than North America, this command is effective when using 8300R4 software or later.
503 Send RBT when the called PS is out of cell (zone) or the power is off/the called Standard SIP station is in off hook state, the power is off, or the cable is pulled out
0 1
Not sent To send
NOTE: Effective only for station-to-station call or originating office on WCS roaming.
504 PS/Standard SIP station No-Answer 0
1
Available Not available 507 Send calling station number to the analog telephone for Caller
ID-Station when an internal call is terminated.
0 1
Not sent To send NOTE: This command is effective only when CM08>603 is set to “0”.
508 Mask indication (*) for Station Authorization Code entry 0 1
To provide Not provided 509 Call Forwarding-Override when the Call Forwarding-All Calls
is set to the My Line of Multiline Terminal
0 1
Call Forwarding-Override As per CM08>268 510 Station Hunting-Not Available when the called PS is out of cell
(zone) or the power is off/Station Hunting-Standard SIP station Off Hook/Power Off/Cable Pulled Out
0 1
Available Not available
513 ID registration method for IP Station 0
1
Protected Login Mode for All IP Sta-tions
As per CM15 Y=480 514 Whether the system encodes the station number when IP
Sta-tions login to the network
0 1
To encode (NEC Original method) Not encoded
515 Whether the system encodes the password when IP Stations login to the network
0 1
Not encoded
To encode (As per CM08>517) Continued on next page
JANUARY/31/2012
3-64 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
516 Whether the system override IP Stations which have the same station number when the IP Stations login to the network NOTE: Set the second data to 0, when an IP Station user moves
to visitor unit without the logout operation in User Mo-bility feature.
0 1
To override Not overridden
517 Encoding method for the password
NOTE: Effective when CM08>515 is set to 1.
0 1
MD5
NEC Original method 519 Whether the system sends SPDT when entering the
name/num-ber for Dial by Name
0 1
Not sent To send 521 PS Location Indication on DESKCON display
[8300R2]
0 1
To provide Not provided 522 Provide the Privacy Release feature which does not use My line
of the third party
0 1
To provide Not provided 524 Send calling party name to the analog telephone for Caller
ID-Station when an internal call is terminated
NOTE: This data is effective only when the 2nd data of CM12 Y=20 is set to 1.
[North America Only]
0
1
To send
(Calling Party Name is sent) Not sent
(Calling Party Number is sent)
525 Sending Switch Hook Flash for Adjunct Analog System 0 1
To send Not sent 527 Provide the system with the voice communication between
ISDN telephone group and Single Line Telephone/Multiline Terminal/PS within the system
0 1
To provide Not provided
534 System operation after the C.O./Tie line (via TRK-B) is com-pleted when a station that has a C.O./Tie line call (via TRK-A) on consultation hold is talking with another C.O./Tie line call (via TRK-B)
0
1
Return to the original call (via TRK-A)
ROT
538 Duration of displaying the destination information (called num-ber/name) indicated on the Multiline Terminal/DESKCON when the outgoing call is answered by the destination (except CCIS)
NOTE: Set this data by CM08>580 when making a call via CCIS.
0 1
Until call is finished 6 seconds
Continued on next page
APRIL/16/2010
3-65 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
542 Type of Camp-On from DESKCON [8300R2]
0 1
Semi-Automatic Camp-On Automatic Camp-On 543 Whether the step call is to be restricted or not 0
1
Restricted Allow 548 Selection of the Guest information displayed on an
administra-tive station (Multiline Terminal/Attendant Console) for 8 char-acters display in left-side on upper line of LCD
0 1
Display PMS information A/B Display VIP/language
549 Whether the PMS information for 8 characters display in left-side on upper line of LCD is to be displayed on Attendant Con-sole or not
[8300R2]
0
1
Display information assigned by CM08>548
Not displayed
553 Inquiry Dial Tone sent to a station makes SHF on Consultation Hold
554 Displaying the calling information on PS when an Attendant Console calls a PS with consultation holding the other station/
trunk [8300R2]
0
1
Information of holding call (Station/Trunk information) Information of Attendant Console
555 Displaying the calling information on PS when a station calls a PS with consultation holding the other station/trunk
[8300R2]
0
1
Information of holding call (Station/Trunk information) Information of calling station assigned by CM60 Y=51 556 Displaying the calling information on PS when a call is
termi-nated from an individual signal line trunk [8300R2]
0
1
Trunk name assigned by CM77 Y=2/
CM77 Y=3 Not displayed 557 Operation of Group Feature Key on Multiline Terminal when
an incoming call/holding call cannot be seized with My line because it is used by the other Multiline Terminal on multiline
0
1
Group Feature Key is available by seizing Sub line
Group Feature Key is unavailable 558 Group Feature Key on Multiline Terminal with Line
Preselec-tion funcPreselec-tion
NOTE: Set the second data of CM08>199 to 0 when the second data of this Command is set to 0.
0 1
To provide Not provided
Continued on next page
APRIL/16/2010
3-66 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
560 Action of monitoring station after the hold/hooking key is pressed in the monitored station or the monitored station becomes idle
0 1
Keep monitoring Stop monitoring
563 Information to display on the middle line of the Multiline Ter-minal/DESKCON LCD when forwarding a trunk call to the Multiline Terminal/DESKCON by Call Forwarding-All Calls/
No Answer/Busy Line/Not Available
0 1
Forwarding station name Caller ID
(Calling number/Calling name)
564 Display the first forwarding station number via CCIS or the second forwarding station number of own office on LCD of for-warding destination Multiline Terminal
0 1
The first forwarding number via CCIS The second forwarding number of own office
567 Automatic Idle Return in case the PBR time out occurs after the Redial/Speaker key is pressed with the Multiline Terminal in on-hook condition
0 1
Not available Available
NOTE: This command is effective only when CM08>172 is set to “1”.
570 Whether the Single Digit Feature Access Code is fixed or not 0
1
Programmable Access Code assigned by CM20 Y=4, 5
Fixed Access Code 576 Attendant/Station Night Transfer when a station/trunk call is
terminated to Attendant Position/station that Night mode is set 0 1
To provide Not provided 577 Changing the ringing tone depend on Day Mode/Night Mode
Change
0 1
To provide Not provided 578 Use of Record key assigned by CM90 Y=00: F5026 for Voice
Mail Live Record-CCIS [8300R5]
0 1
Used as Record key and End key Used as Record key
579 Sending of confirmation tone from VMS to the calling and called party while Voice Mail Live Record-CCIS is executed [8300R5]
0 1
To send Not sent
580 Duration of displaying the caller information (calling number/
name) indicated on Multiline Terminal/DESKCON when the incoming call is answered (effective for all trunks)
0 1
6 seconds
Until call is finished
NOTE: When making a call via CCIS, the duration of displaying the destination information when the outgoing call is answered, is selected by this command.
Continued on next page
JANUARY/14/2011
3-67 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
581 Number display on the called PS when calling from Sub Line [8300R3.5]
0 1
My Line Number As per CM08>502 NOTE: The number displayed on the called PS is as follows when this command is set to “1”.
- My Line Number is displayed when CM08>502 is set to “0”.
- Sub Line Number is displayed when CM08>502 is set to “1”.
583 Whether the calling number is automatically stored or not for the station call via CCIS
0 1
To store Not stored 584 Caller ID sent to ISDN telephone when terminating a call from
Single Line Telephone/Multiline Terminal to ISDN telephone 0
1
Calling number assigned by CM12 Y=12, 13/CM50 Y=05
Originating station number 585 Whether the service which is set to a group member station is
effective when the group members are called by Group Feature Key
0 1
Effective Ineffective
NOTE: When the second data of CM08>585 is set to 0, the following services are effective.
Call Forwarding-All Calls/Split Call Forwarding-All Calls/Call Forwarding-All Calls of Mobility Access/Do Not Disturb/Transfer the call to station set Do Not Disturb (CM51 Y=10)/Call Forwarding-Logout
588 CID Call Back when an incoming call is forwarded, when a station to which a call terminated is busy, or when a station to which a call terminated is set Do Not Disturb
0 1
To provide Not provided
NOTE: CID Call back by this command is available under the following conditions.
• The Multiline Terminal station line is set to Call Forwarding-All Calls/Call Forwarding-Busy Line/
Call Forwarding-No answer/Call Forwarding-IP Station logout when a trunk call is terminated.
• The Multiline Terminal station line is set to Do Not Disturb when a trunk call is terminated.
• The Multiline Terminal station line received the incoming call is busy when a trunk call is termi-nated.
591 Extension state (Idle/Busy) is displayed immediately to Busy lamp Field on DESKCON
[8300R2]
0 1
To display Not displayed
592 Setting of the Caller ID information sending format 0
1
CCITT V.23 modem (Data Format:
ETSI)
Bell 202 modem NOTE: A system reset is required after setting this command.
Continued on next page
RESET
JANUARY/14/2011
3-68 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
593 Call termination to My Line while the station user makes a call with a Sub line or a trunk line on a Multiline Terminal
0
1
To activate the service (Call Forward-ing/Station Hunting) that set an incoming call
As per CM08>268 (the calling station hears RBT, or performs a Voice Call) 594 The LED of Attendant LOOP-Key for Camp-on recall (for
IAC) [8300R2]
0 1
Flashing red in short interval Flash red
599 Part lowercase letter from capital letter when searching name by Scroll directory
[8300R3]
0 1
To part Not parted
Continued on next page
JUNE/15/2011
3-69 NWA-033623-001 Rev.8.1 91ch3001.fm