FEATURE DATA (0/1)
BASIC SERVICE: 101-199
: Default
BASIC SERVICE SETTING DATA
101 When CM08>102: 0 for Single Line Telephone (Related command: CM35 Y=148)
0
1
The call with STA-B is disconnected, and STA-A returns to STA-C
Three Party Conference 102 When the station A), after holding the other station
(STA-C), has made a switch hook flash while talking with another sta-tion (STA-B)
(Related command: CM35 Y=148)
NOTE: This data is applied to single line telephone station.
0 1
As per CM08>101
STA-B is held, and STA-A returns to the connection with STA-C
(Broker’s Call)
103 When the station (STA-A), after holding a C.O. call, has made a switch hook flash while talking with another station (STA-B) (Related command: CM35 Y=148)
NOTE: This data is applied to single line telephone station.
0 1
As per CM08>104
STA-B is held, and STA-A returns to the connection with C.O. line (Bro-ker’s Call)
104 When CM08>103: 0
(Related command: CM35 Y=148)
0
1
The call with STA-B is disconnected, and STA-A returns to the C.O. line Three Party Conference
109 Periodic record tone on live record 0
1
To send Not sent 110 1000-Slot Memory Block number “03” for Station Speed
Dial-ing is used as the Memory Block for System Speed DialDial-ing
0
1
Available
See CM20 Y=0-3: A150 Not available
111 1000-Slot Memory Block number “01” for Station Speed Dial-ing is used as the Memory Block for System Speed DialDial-ing
0
1
Available
See CM20 Y=0-3: A151 Not available
112 1000-Slot Memory Block number “00” for Station Speed Dial-ing is used as the Memory Block for System Speed DialDial-ing
0
1
Available
See CM20 Y=0-3: A152 Not available
113 Outgoing C.O. line call from Station-to-Station connection 0 1
Restricted Allowed 114 Answer preference for enhanced Trunk Line Appearance
(Trunk Direct Appearances)
0
1
Display 2-digit trunk ID code (last two digits assigned by CM30 Y=19) Display 4-digit trunk ID code (four digits assigned by CM30 Y=19)
See CM30 Y=19 Continued on next page
JANUARY/31/2012
3-38 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
115 A station user is allowed to break into a call between a C.O. line party and another station by Executive Right of Way (Executive Override)
0 1
Restricted Allowed
116 Answer Key rings on TAS and Pooled Line 0
1
To provide Not provided
See CM90 Y=00: F40XX 117 While the station A) is talking with another station
(STA-B) after consultation hold with a C.O. call, when STA-B has hung up
0
1
STA-A returns to the call with C.O.
line
STA-A hears ROT 119 Toll Diversion
When the station dials restricted area code after C.O. trunk access code
0 1
Diversion to attendant “ICPT”
Station receives ROT
120 Name Display (Guest Name Display)
Time to go back to Date and Time display after the call answered
0 1
10 seconds later 6 seconds later
121 Name Display (Guest Name Display) after the call answered 0 1
Until call finished As per CM08>120 123 When a station has originated a call to C.O. line via the trunk
route assigned to 1 by CM35 Y=004, and answer signal has not been detected within the preprogrammed time after dialing, a pseudo-answer signal is generated
See CM41 Y=0>03 0 1
To send Not sent
[Australia Only]
0 1
Not sent To send
[Other than Australia]
124 Multiple connections of Voice Response System on Announce-ment Service
0 1
Available
Not available (Single connection) 125 Unsupervised transfer
After holding an incoming C.O. call, an attendant dials a sta-tion. After connection with the attendant, if the called station goes on-hook, the attendant returns to the held call.
[8300R2]
0 1
Return to held call Attendant hears ROT
Continued on next page
JANUARY/14/2011
3-39 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
126 Timing of Call Forwarding-No Answer for trunk incoming call 0
1
As per timing for internal call or an assisted call
(As per CM41 Y=0>15/CM41 Y=0>101/CME6 Y=08)
As per timing for trunk incoming call (As per CM41 Y=0>01/CM41 Y=0>100/CME6 Y=07)
130 Exclusive Hold on Multiline Terminal 0
1
Not available Available 133 A trunk line placed in Consultation Hold by Call Park-System/
Tenant, can be retrieved by pressing trunk line appearance key on Multiline Terminal
0 1
Not available Available
135 Periodic Time Indication Tone sending for C.O. Line
connec-tion See CM41 Y=0>09
0 1
To send Not sent 136 Periodic Time Indication Tone sending for Tie Line connection
when CM08>135: 0 See CM08>135: 1 0 1
To send Not sent 137 Ringing signal for station/attendant calls with trunk lines placed
in Consultation Hold
0
1
Change from Internal to External Ringing when caller goes on-hook or presses RLS key
SeeCM08>138 CM15 Y=083, 084 External Ringing
SeeCM35 Y=033, 034 Continued on next page
JANUARY/14/2011
3-40 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
138 Multiline Terminal ringing signal for Station-to-Station connec-tion
0 1
External Ringing Internal Ringing Multiline Terminal ringing signal for calls from station through
CCIS
0 1
External Ringing Internal Ringing Multiline Terminal ringing signal for calls from C.O./Tie Line
through CCIS
0 1
Internal Ringing External Ringing Multiline Terminal ringing signal for calls from station through
CCIS
[North America Only]
0 1
2 seconds ON-4 seconds OFF 1 second ON-2 seconds OFF
Multiline Terminal ringing signal for calls from C.O./Tie Line through CCIS
[North America Only]
0 1
1 second ON-2 seconds OFF 2 seconds ON-4 seconds OFF
Single Line Telephone ringing signal for Station-to-Station connection
0 1
As per CM04 Y=00>06 As per CM04 Y=00>05 140 Message Waiting indication on both My Line and Sub Line of
Multiline Terminal
0 1
Available
Not available (My Line Only) 141 Recording Station-to-Station calls automatically
See CM13 Y=23 CM76 Y=13 0 1
Start automatically Not available 142 Attendant access capability from the stations belonging to a
tenant with no Attendant Console
[8300R2] See CM62
0 1
To allow Not allowed
143 Individual attendant access from a station within another tenant
[8300R2] See CM20 Y=0-3: A095
0 1
Restricted Allowed
(Recall transferring station) 144 Lamp color on Multiline Terminal when Message Waiting is set
NOTE: When the second data is set to “0” (Green), the Icon to be displayed on Multiline Terminal normally is not dis-played.
0 1
Green Red
145 Outgoing call preset and call answer preset of Multiline Termi-nal Not available
Continued on next page Feature OG
Feature Answer
JUNE/15/2011
3-41 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
146 Transferred C.O. call to a busy station is automatically Camped-on when transferring station goes on-hook
0 1
Available Not available
(Recall transferring station) 147 When a station transfers a C.O. call to a busy station, and
per-forms a switch hook flash
0
1
The station hears Special Dial Tone and use of Camp-On access code is allowed
The station returns to C.O. line call 148 When a station user, upon encountering the called station busy,
has dialed the same last digit again while hearing busy tone NOTE: Effective only when CM08>069: 1.
See CM08>069 0 1
Hearing busy tone Ineffective
149 In delay-type paging, when the paged party encounters a busy paging circuit, Call Back is automatically set
(Applicable to both Radio Paging and Speaker Paging)
0 1
Available Not available
150 Restriction of a station-to-station call between tenants by CM63 Y=1 is temporarily cancelled by means of external key
0 1
To cancel Not canceled 151 Dialing 1 for switch hook flash (DP telephone)/switch hook
flash (DTMF/DP telephone)
0 1
Not available Available
153 Howler Tone sent to locked-out stations 0
1
Not sent To send 155 Whether dialing digit “1” upon encountering trunk busy is
effective as switch hook flash. (For DP telephone) NOTE: Effective only when CM08>151: 1.
0 1
Effective as switch hook flash Ineffective
Continued on next page
JUNE/15/2011
3-42 NWA-033623-001 Rev.8.1 91ch3001.fm
COMMAND CODE TITLE:
BASIC SERVICES 08
: Default
BASIC SERVICE SETTING DATA
156 Dialing of a Single Digit Feature Access Code while the calling station hears RBT, or performs a Voice Call
0 1
Available Not available
The table below shows the available features and its access codes for Single Digit Feature Access Code, while the calling station hears RBT.
NOTE 1: While the Multiline Terminal or DP telephone is holding the other call, this feature is not available.
NOTE 2: While the DTMF telephone is holding the other call, this feature is not available.
157 Paging answer by PGD(2)-U10 Station Dialing (only in the case of Delay and Non-delay answer)
NOTE: The Paging Answer by the following methods is applied depending on the setting of this command.
- When the second data is set to “0”: PGD(2)-U10 station number assigned by CM10 Y=00.
- When the second data is set to “1”: Paging Answer Zone 0-9 assigned by CM20 Y=0-3: A070-A079.
0 1
Available Not available
158 All Zone Internal Paging
See CM56 Y=00-07 CM20 Y=0-3: A164 0 1
Not available Available 161 Transfer a trunk line placed in Consultation Hold by
Trunk-Direct Appearances (Hold Transfer)
0 1
Available (Hold Transfer) Not available (Consultation Hold) 162 Multiple Radio Paging access after accessing a Radio Paging
trunk with delay type Radio Paging
NOTE: This is ineffective when CM08>157: 0.
0 1
Not available Available
Continued on next page Access
Code Service
Calling Station Kind Attendant
Console Multiline
Terminal DP
Telephone DTMF Telephone 1 Voice Call Available Available Available Available after Hooking
NOTE 2