05122 105247 The storage system is in internal process, or some other user is changing the
configuration. Wait, then retry the operation.
If the same problem occurs again, close the windows, and retry the operation after the internal processing or the configuration change has been completed. If the internal processing or the configuration change takes much time to complete, please call the Support Center.
E
05122 105254 No more graph items can be added because the number of graph items that can be displayed in one graph panel has reached the maximum.
Set the number of graph items per one graph panel to 8 or less. W
05122 107001 The processing cannot continue due to an internal logic
contradiction.
Refresh the window, and then retry the operation. If this problem persists, call the Support Center.
E
05122 107002 The processing cannot continue due to an internal logic
contradiction.
Refresh the window, and then retry the operation. If this problem persists, call the Support Center.
E
05122 107003 The processing cannot continue due to an internal logic
contradiction.
Refresh the window, and then retry the operation. If this problem persists, call the Support Center.
E
05122 107004 The processing cannot continue due to an internal logic
contradiction.
Retry the operation. If the same problem occurs again, close the windows, refresh it, then retry again. If the same problem persists despite retrying, please call the Support Center.
E
05122 107005 The processing cannot continue due to an internal logic
contradiction.
Retry the operation. If the same problem occurs again, close the windows, refresh it, then retry again. If the same problem persists despite retrying, please call the Support Center.
E
05122 107015 The processing cannot continue due to an internal logic
contradiction.
Refresh the window, and then retry the operation. If this problem persists, call the Support Center.
E
Part Code
Error Numbe
r Error Message Recommended Action Severity
Level 05205 001076 The specified volume(s) are
already used by ShadowImage for Mainframe or
ShadowImage.
Specify another volume. W
Code r Level
05205 001077 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
The volume used by ShadowImage for Mainframe, or ShadowImage cannot be used. Specify another volume.
W
05205 001078 The volume is a LUSE volume.
Cannot change to reserve volume.
Check the setting. W
05205 001079 The volume specified as the reserved volume has the Cache Residency Manager setting.
Release the Cache Residency Manager
setting. W
05205 001080 The command was rejected due to one of the following reasons.
• The specified volume was blocked.
• The specified volume was used as a system disk.
Recover the blocked volume, then retry the operation. Also, the system disk cannot be used as P-VOL. Specify another volume.
W
05205 001081 The specified volume(s) are used as a command device.
Release the command device, or select another volume.
W
05205 001082 The reserved volume(s) is not
equipped. Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001083 The specified volume is already reserved. The configuration information on such as a volume (LDEV) displayed on the window might be out of date.
Click [Refresh All] on the [File] menu, then retry the operation. If the same problem persists despite retrying, please call the Support Center.
W
05205 001084 The number of reserved volume that can be set in the storage system exceeds the maximum.
The configuration information on such as a volume (LDEV) displayed on the window might be out of date.
Click [Refresh All] on the [File] menu, then retry the operation. If the same problem persists despite retrying, please call the Support Center.
W
05205 001085 The volume(s) are already used by Volume Migration.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001086 The RAID level of the target volume is not supported.
Check the microcode version, and please call the Support Center.
W
05205 001087 The volume specified as a migration target is being formatted.
Retry the operation after the format is
completed. W
05205 001088 The volume specified as a migration source cannot be migrated, because it is already used as a reserved volume of ShadowImage for Mainframe, ShadowImage, or Volume Migration.
Specify another volume. W
Code r Level
05205 001094 The specified volume is not a reserved volume. The
configuration information on such as a volume (LDEV) displayed on the window might be out of date.
Click [Refresh All] on the [File] menu, then retry the operation. If the same problem persists despite retrying, please call the Support Center.
W
05205 001095 The number of the reserved volumes exceeds the maximum number that can be assigned.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001096 The command has been rejected, because the volume specified as a target volume or a reserved volume is used by the host.
Execute the vary offline command to disable the volume from the
mainframe host, then retry the operation.
W
05205 001109 Volume Migration does not
support the volume(s). Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001117 The volume specified as a migration source is already used as a volume of Concurrent Copy.
Specify another volume. W
05205 001118 The volume specified as a migration target is already used as a volume of Concurrent Copy.
Specify another volume. W
05205 001119 The volume(s) is already being
used by Concurrent Copy. Specify another volume. W 05205 001120 The volume specified as a
migration source is already used as a volume of Compatible XRC.
Specify another volume. W
05205 001121 The volume specified as a migration target is already used as a volume of Compatible XRC.
Specify another volume. W
05205 001122 The volume(s) is already being
used by Compatible XRC. Specify another volume. W 05205 001207 The volume types do not
match.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001208 Volume Migration does not support the volume(s).
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001209 Volume Migration does not support the volume(s).
Retry the same operation. If nothing changes, please call the Support Center.
W
Code r Level
05205 001210 The shared memory to set a plan is insufficient.
Install the shared memory if it is possible.
If it is impossible to install the shared memory, the plan cannot be set any further.
See the section about the
computational methods of the number of movement plans described in the Volume Migration User Guide for the relation between the number of plans that can be made and the shared memory.
W
05205 001211 The number of volume pairs
exceeds the maximum. Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001212 The source volume(s) is not
equipped. Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001213 The command was rejected due to one of the following reasons.
• The volume specified as a migration source was blocked.
• The volume specified as a migration source was used as a system disk.
Recover the blocked volume, then retry the operation. Also, the system disk cannot be used as P-VOL. Specify another volume.
W
05205 001214 The volume specified as a migration source is being formatted.
Retry the operation after the format is completed.
W
05205 001215 The volume specified as a migration source is a command device.
The command device cannot be used for Volume Migration. Specify another volume.
W
05205 001216 The target volume(s) is not equipped.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001217 The command was rejected due to one of the following reasons.
• The volume specified as a migration target was blocked.
• The volume specified as a migration target was used as a system disk.
Recover the blocked volume, then retry the operation. Also, the system disk cannot be used as P-VOL. Specify another volume.
W
05205 001218 The volume specified as a migration target is being formatted.
Retry the operation after the format is
completed. W
05205 001219 The volume specified as a migration target is a command device.
The command device cannot be used for Volume Migration. Specify another volume.
W
Code r Level
05205 001220 The volume is not a reserved volume.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001221 The volume(s) are already used by Volume Migration.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001222 The number of the
ShadowImage for Mainframe or ShadowImage pair volumes has reached the maximum.
See Supported and prohibited source and target volumes" in the
Performance Guide if the volumes of ShadowImage for Mainframe or ShadowImage can be migrated.
W
05205 001223 The volume(s) are already used by Volume Migration.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001224 The volume(s) are already used by Volume Migration.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001225 The selected source volume and destination volume are the same volume.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001226 The volume(s) is already being used by Remote Copy.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001227 The volume(s) is already being used by Remote Copy.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001228 The RAID level of the target volume is not supported.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001229 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
See "Supported and prohibited source and target volumes" in the
Performance Guide if the volumes of ShadowImage for Mainframe or ShadowImage can be migrated.
W
05205 001230 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
See "Supported and prohibited source and target volumes" in the
Performance Guide if the volumes of ShadowImage for Mainframe or ShadowImage can be migrated.
W
05205 001231 The volume(s) is already being used by Data Migration.
Release the Data Migration. W
05205 001232 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
Specify another volume. W
05205 001233 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
Specify another volume. W
Code r Level
05205 001234 The volume specified as a migration target cannot be migrated because it is used as P-VOL of TrueCopy, TrueCopy for Mainframe, or High Availability Manager.
Specify another volume. W
05205 001235 The volume specified as a migration target cannot be migrated because it is used as S-VOL or R-VOL of TrueCopy, TrueCopy for Mainframe, or High Availability Manager.
Specify another volume. W
05205 001236 The RAID level of the target volume is not supported.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001237 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
Specify another volume. W
05205 001238 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
Specify another volume. W
05205 001239 The volume(s) is already being used by Data Migration.
Release the Data Migration. W
05205 001240 The specified volume(s) are already used by ShadowImage for Mainframe or
ShadowImage.
Check the status of the selected
volume. W
05205 001241 The volume specified as the migration source has the Cache Residency Manager setting.
Specify another volume. W
05205 001242 The volume specified as the migration target has the Cache Residency Manager setting.
Specify another volume. W
05205 001243 The specified volume is not a source volume.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001246 The number of plans that could be executed at once exceeds the maximum.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001247 The volume is already a source volume.
Retry the same operation. If nothing changes, please call the Support Center.
W
05205 001606 The program product of Volume Migration is not installed.
Install the Volume Migration program product.
W
05205 001607 Volume Security settings exist
on the specified volume. Release the Volume Security settings. W
Code r Level
05205 001608 Volume Security settings exist on the specified volume.
Release the Volume Security settings. W
05205 001609 Volume Retention Manager settings exist on the specified volume.
Release the Volume Retention Manager
settings. W
05205 001610 Volume Retention Manager settings exist on the specified volume.
Release the Volume Retention Manager
settings. W
05205 001611 The specified volume has Read Only/Protect/SVOL Disable setting of Data Retention Utility.
Release the Read Only/Protect/S-VOL Disable setting of Data Retention Utility.
W
05205 001612 The specified volume has Read Only/Protect/SVOL Disable setting of Data Retention Utility.
Release the Read Only/Protect/S-VOL Disable setting of Data Retention Utility.
W
05205 002003 An internal process is being executed, or maintenance is in progress.
Confirm that maintenance operation is not in progress, and retry after a while. W
05205 002004 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 002011 The storage system is busy.
Please wait for a while, and then retry the operation.
Release the Remote Copy Pair. E
05205 002024 The controller detected the blockade location.
Please call the Support Center. E
05205 002025 The controller detected the
blockade location. Please call the Support Center. E 05205 002026 The controller detected the
blockade location.
Please call the Support Center. E
05205 002027 The controller detected the
blockade location. Please call the Support Center. E 05205 002028 The controller detected the
blockade location.
Please call the Support Center. E
05205 002029 A data transfer failure was
detected. Please call the Support Center. E
05205 002030 A data transfer failure was detected.
Please call the Support Center. E
05205 003002 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 003003 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
05205 005013 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 005099 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
Code r Level
05205 005203 This functionality is not available because Volume Migration is not installed.
Install the required program product. W
05205 005504 The specified volume cannot be migrated because it is used as S-VOL in the following status.
• A volume of TrueCopy, TrueCopy for Mainframe, or High Availability Manager in the Pending status.
For the relation between TrueCopy, TrueCopy for Mainframe, or High Availability Manager and Volume Migration, see the description of Volume Migration with TrueCopy and Universal Replicator DP-VOLs in the Volume Migration User Guide.
W
05205 005505 The volume(s) is already being used by Remote Copy.
Please Release the Remote Copy Pair. W
05205 005506 The specified volume cannot be migrated because it is used as P-VOL in the following status.
• A volume of TrueCopy, TrueCopy for Mainframe, or High Availability Manager in the Pending status.
For the relation between TrueCopy, TrueCopy for Mainframe, or High Availability Manager and Volume Migration, see the description of Volume Migration with TrueCopy and Universal Replicator DP-VOLs in the Volume Migration User Guide.
W
05205 005507 The specified volume is not defined as the target volume of Volume Migration.
Retry the operation. W
05205 005510 This function has already
executed. Wait for a moment and retry. E
05205 006000 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
05205 006001 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 006012 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
05205 006022 The system failed to access the
file. If this problem persists despite
retrying, please call the Support Center.
E
05205 006023 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 006036 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
05205 006050 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 006501 There is no monitoring data. Change the monitor switch to ON, and accumulate the data.
W
05205 006502 Processing in progress. Please wait for a while, and then retry the operation.
Retry the same operation several times. If the same error occurs, please call the Support Center.
i
05205 006510 The storage system is busy.
Please wait for a while, and then retry the operation.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
Code r Level
05205 006511 Please check pair status. If this problem persists, please call the Support Center.
W
05205 006512 Please check pair status. If this problem persists, please call the
Support Center. W
05205 006531 The SVP is busy. Please wait for a while, and then retry the operation.
If the same problem persists despite retrying, please call the Support Center.
W
05205 006532 The SVP is now updating the statistics data.
Please retry after a while. If the problem persists despite retrying, please call the Support Center.
W
05205 007060 An error occurred during SVP processing.
If this problem persists, please call the Support Center.
E
05205 007111 An error occurred during SVP
processing. If this problem persists, please call the
Support Center. E
05205 007400 Failed to get information from hihsmatm.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007401 Failed to get information from hihsmpln.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007402 Failed to get information from hihsmfpg.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007403 Failed to get information from hihsmcls.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007404 Failed to get information from hihsmpgr.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007405 Failed to get information from hihsmldv.ini. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007406 Failed to get configuration information. The file may not exist in the specified directory.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007407 Cannot make proper migration plan for this function.
Retry the same operation several times. If the same error occurs, please call the Support Center.
W
05205 007408 There is not enough valid monitoring data in the specified term.
Retry the same operation several times. If the same error occurs, please call the Support Center.
W
05205 007409 Failed to write to the plan file (hihsmpln.ini).
Retry the same operation several times. If the same error occurs, please call the Support Center.
W
05205 007410 Failed to write to the plan file (hihsmpgr.ini).
Retry the same operation several times. If the same error occurs, please call the Support Center.
W
Code r Level
05205 007411 Failed to write to the plan file (hihsmldv.ini).
Retry the same operation several times. If the same error occurs, please call the Support Center.
W
05205 007412 The file contains invalid data. Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007413 The file (hihsmpin.ini) contains invalid data.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007414 The file (hihsmpgr.ini) contains invalid data.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007415 The file (hihsmcls.ini) contains invalid data.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007416 The file (hihsmpgr.ini) contains invalid data.
Retry the same operation several times. If the same error occurs, please call the Support Center.
E
05205 007417 The file (hihsmldv.ini) contains invalid data.
Retry the same operation several
Retry the same operation several