• No results found

Table 2-19 Error codes (part code 00405)

In document Hitachi Virtual Storage Platform (Page 59-65)

00310 065687 Specify a value between 0 to 256 in each field for IPv4.

Specify a value between 0 to FFFF in each field for IPv6.

Correct the settings, then retry the operation.

W

00310 065710 The information being set has not been applied to the device yet. Apply the information to the device, then retry the operation.

Click [Apply] and apply the setting information, or [Cancel] and discard the setting information, and retry the operation.

i

00310 069059 Test Trap will be sent to the registered community. Do you want to continue the operation?

Click [OK] to continue the operation. W

00310 069060 Trap transmission completed.

Please wait for a while and check the reception of the Trap.

Confirm that the Trap has been

received. i

Part

Code Error

Number Error Message Recommended Action Severity

Level 00405 005013 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 005047 An error occurred when installing or removing the program product. Please select the program product and select [Detail] to check the details of the error.

If the same error occurs despite retrying, please call the Support Center.

W

00405 005070 The product name is different.

Select the correct program product name.

Check the product name of the selected

program product. W

00405 005071 Unable to install the license key.

Temporary key installed. Purchase the official license to use this

software. W

00405 005072 The existing capacity of the licensed program product is invalid.

Order the appropriate license that meets the requirement.

W

00405 005073 To install/remove this program product, you must install/

remove another program product first.

• Program Product Name

>>>>> Preamble

---• Universal Replicator for Mainframe >>>>>

TrueCopy for Mainframe

• Universal Replicator

>>>>> TrueCopy

• High Availability Manager

>>>>> TrueCopy

• Copy-on-Write Snapshot

>>>>> ShadowImage

• Server Priority Manager

>>>>> Performance Monitor

• Volume Migration >>>>>

Performance Monitor

• Disaster Recovery Extended

>>>>> Universal Replicator for Mainframe

• Disaster Recovery Extended

>>>>> Universal Replicator

• Compatible Hyper PAV

>>>>> Compatible PAV

• Dynamic Tiering >>>>>

Dynamic Provisioning

• Dynamic Provisioning for Mainframe >>>>>

Dynamic Provisioning

• Dynamic Tiering for Mainframe >>>>>

Dynamic Tiering

• Dynamic Tiering for Mainframe >>>>>

Dynamic Provisioning for Mainframe

• Thin Image >>>>>

Dynamic Provisioning

Install or remove the related program product first.

W

00405 005074 The specified PP ID is invalid. Retry again. If it occurred again, call the Support Center.

W

00405 005075 This key code is invalid. Any of the following is thought to be the problem. Reissue the key code.

• Key code character is incorrect.

• Key code length is incorrect.

• Key code issue order is incorrect.

W

00405 005076 The serial number is incorrect.

Please correct.

Check the DKC Serial Number. W

00405 005077 To remove this program product, you must remove another program product first.

• Program Product Name

>>>>> Preamble

---• Universal Replicator for Mainframe >>>>>

TrueCopy for Mainframe

• Universal Replicator

>>>>> TrueCopy

• High Availability Manager

>>>>> TrueCopy

• Copy-on-Write Snapshot

>>>>> ShadowImage

• Server Priority Manager

>>>>> Performance Monitor

• Volume Migration >>>>>

Performance Monitor

• Disaster Recovery Extended

>>>>> Universal Replicator for Mainframe

• Disaster Recovery Extended

>>>>> Universal Replicator

• Compatible Hyper PAV

>>>>> Compatible PAV

• Dynamic Tiering >>>>>

Dynamic Provisioning

• Dynamic Provisioning for Mainframe >>>>>

Dynamic Provisioning

• Dynamic Tiering for Mainframe >>>>>

Dynamic Tiering

• Dynamic Tiering for Mainframe >>>>>

Dynamic Provisioning for Mainframe

• Thin Image >>>>>

Dynamic Provisioning

Remove the related program product

first. W

00405 005078 To remove this program product, you must remove another program product first.

• Program Product Name

>>>>> Preamble

---• Universal Replicator for Mainframe >>>>>

TrueCopy for Mainframe

• Universal Replicator

>>>>> TrueCopy

• High Availability Manager

>>>>> TrueCopy

• Copy-on-Write Snapshot

>>>>> ShadowImage

• Server Priority Manager

>>>>> Performance Monitor

• Volume Migration >>>>>

Performance Monitor

• Disaster Recovery Extended

>>>>> Universal Replicator for Mainframe

• Disaster Recovery Extended

>>>>> Universal Replicator

• Compatible Hyper PAV

>>>>> Compatible PAV

• Dynamic Tiering >>>>>

Dynamic Provisioning

• Dynamic Provisioning for Mainframe >>>>>

Dynamic Provisioning

• Dynamic Tiering for Mainframe >>>>>

Dynamic Tiering

• Dynamic Tiering for Mainframe >>>>>

Dynamic Provisioning for Mainframe

• Thin Image >>>>>

Dynamic Provisioning

Remove the related program product first.

W

00405 005079 This program product needs

another DKC type. Please call the Support Center. W 00405 005080 You cannot change this program

product.

Please call the Support Center. W

00405 005501 The trial days have exceeded

the specified extended days. Please confirm the installation status of

the program product. W

00405 005502 The program product will be removed because the licensed capacity is insufficient.

Please increase the licensed capacity. W

00405 005524 The specified license key cannot be installed, because the environment required for the program product (license key) is not prepared.

Please call the Support Center. E

00405 005525 You cannot remove Data Retention Utility, because "S-Vol disable" or "Reserve" setting remains.

Remove the "S-Vol disable" setting. W

00405 006012 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 006022 The SVP is busy. Please wait for a while, and then retry the operation.

If the same problem persists despite retrying, please call the Support Center.

W

00405 006023 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 006517 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007060 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007061 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007062 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007063 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007064 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007101 The program product has

already been installed. Check the setting. W

00405 007111 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007201 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007202 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007203 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007204 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007205 An error occurred during SVP

processing. If this problem persists, please call the

Support Center. E

00405 007206 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 007207 An error occurred during SVP processing.

If this problem persists, please call the Support Center.

E

00405 008002 An error occurred during SVP

processing. Isolate the abnormal section following the procedure below:

Rebooting the PC

Checking the LAN card/LAN cable Checking the IP address of the PC Replacing the PC

Turning on, then off the DKC (care should be taken.)

E

00405 008003 The storage system status is invalid.

Isolate the abnormal section following the procedure below:

Rebooting the PC. If this does not fix the problem:

Checking the LAN card/LAN cable. If this does not fix the problem:

Checking the IP address of the PC. If this does not fix the problem:

Replacing the PC. If a new PC does not fix the problem:

Turn the DKC on, then off (care should be taken.

E

00405 008202 The DKCMAIN microcode does not support this program product.

Contact the Support Center for the plans of the program product to be supported by DKCMAIN.

E

00405 008203 This program product needs a later version of hardware.

Please call the Support Center.

Please call the Support Center. E

00405 008204 To use this program product, it is required to enable the program product by allocating additional shared memory. Add cache memory in case of need.

Allocate additional shared memory, and enable the program product. E

00405 008205 This program product remains in the configuration. Please call the Support Center.

Please call the Support Center. E

00405 008206 This program product is in use, you cannot remove this

program.

Stop using this program product

function. W

00405 008301 The storage system status is

invalid. Retry this operation. E

00405 055263 The specified program product cannot be removed, because the license for it is allocated to the SLPR.

If the same problem persists despite retrying, please call the Support Center.

E

In document Hitachi Virtual Storage Platform (Page 59-65)