Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
Thin film
Metal foil
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
82
CONDUCTIVE T
APES & SHEETS
CONDUCTIVE TAPES
/
SHEETS
THIN FILM
Thin film
REMILESS
Super-thin conductive film with thickness of 35 µm.
P88
CONDUCTIVE FABRIC
Conductive fabric
CONDUCTIVE FABRIC TAPE CONDUCTIVE FABRIC TAPE
Conductive fabric tape
P83 P84
METAL FOIL
Metal foil (embossed)
COPPER EMBOSSING TAPE
Low-resistivity type using embossed metal foil and conductive adhesive material.
Metal foil
CONDUCTIVE TAPE
Embossed type Standard type
P83 P85
CLEAR CONDUCTIVE FILM
Clear Conductive Film
CLEAR CONDUCTIVE FILM
ITO, Indium Tin Oxide, conductive film has superior optical transparency.
Metal foil
Thin film
Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
●Rolled copper foil
Embossed parts of the metal foil make direct contact with the object
●Embossed parts are bent to provide direct contact with the object. ●Large contact area provides stable contact.
Feature
Material
COPPER EMBOSSING TAPE
/
CCTE-C
■Standard length:20m
Part No. (mm)Width Thickness(mm) adhesive strength Resistivity CCTE-10-C 10 0.13 N/20mm/Width10.1 Ω/□ 20mm0.01 CCTE-20-C 20 CCTE-A4-C※ 1 (A4) ※ 1)Sheet type Metal foil Adhesive material Adhered body Contact points
※The values are measured data for reference, not guaranteed.
OConductive woven fabric / Cu-Ni plated woven fabric with carbon-coating (UL510FR)
Thin and durable carbon-coated type
OCarbon-coating protects from the galvanic corrosion suffered by metal foils.
OCarbon-coated special knitting provides no yarn-loosening or fuzz on the surface.
OCarbon-coated tape with low resistivity, effective against electrostatic discharge.
Feature
Material
CONDUCTIVE FABRIC TAPE
/
CSTK
The values are measured, but not guaranteed. Part No. Width(mm) (mm) Thickness adhesive strength Resistivity
CSTK-008 8 0.1 8.53 N/25mm Width 0.04 1/20mm CSTK-010 10 CSTK-015 15 CSTK-020 20 CSTK-025 25 CSTK-030 30 CSTK-040 40 CSTK-060 60 CSTK-250 250 CSTK-300 300 QStandard length: 20m Conductive fabric Adhesive material Conductive filler Adhered body Contact points
83
CONDUCTIVE T
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
Thin film
Metal foil
Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
84
CONDUCTIVE T
APES & SHEETS
Various width are available
OConductive adhesive is made of mixed metal pastes with the normal adhesive to improve conductivity. This material has very good effectiveness for EMI shielding and electric to objects needed conductivity. Non-dioxin type flame retardent.
Feature
CONDUCTIVE FABRIC TAPE
/
CNT
width (mm) 10 20 25 50 Part No. CNT-10H CNT-20H CNT-25H CNT-50H Backing Adhesive Conductive Filler Liner Thickness Adhesion Ball tack Shielding Effectiveness Holding Power Surface Resistance Electric Resistance Conductive Acrylic Adhesive (non-Dioxin) Conductive Fabric Release Liner Color Overall Backing Adhesive Release Liner mm mm mm mm -gf/25mm No. dB mm 1/cm2 1/cm2 0.14±0.02 0.1 0.04 0.076 Gray 1000+100 7~9 60~70 No Creep Less than 0.05 Less than 0.03 Dial gage Dial gage Dial gage Dial gage JIS Z 0237 JIS Z 0237 ASTM D 4935-89 JIS Z 0237 ISL 2000A HIOKI 3540 CF-235 (Rip-Stop)
Conductive Acrylic Adhesive Nickel Powder Release Liner Paper
Ni+Cu+Ni Non-Dioxin type FR roll (m) 50 50 50 50
Material
Standard sizes & Appearance
General Properties
Metal foil
Thin film
Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
85
CONDUCTIVE T
APES & SHEETS
Technical Data
Colour original silver silver
Thickness without adhesive (mm) 0,030 ± 10% 0,050 ± 10% 0,035 ± 10% Total Thickness (mm) 0,060 ± 10% 0,080 ± 10% 0,065 ± 10% Adhesive Properties
Type of adhesive Acrylic, electrically conductive
Adhesive strength (N/10 mm) >2 *2 *2
Thermal Properties
Temperature performance (°C) -40 to +130 -40 to +130 -40 to +130 Short term Temperature performance (°C) 180 180 180 Flammability according to IEC 60454-2 flame retardant Electric Properties
Electrical resistance according to PV 1006-14
(internal, measured at ambient temperature) )11 )201 )11 Mechanical Properties
Tensil strength (N/10 mm) 30–35 40–50 30–45
Elongation at break in % 10–20 10–15 10–20
Liner silicon paper
Storage conditions cool and dry (15 – 25°C, <65% rel. humidity)
Electrical properties will generally stay in tact up to 80°C, however they depend on the application/type of assembly. Customer specific tests are strongly recommended.
Thin and flexible metal foil tape backed by a conductive
filler adhesive
OEasy application same uses as a transparent tape.
OHigh shielding effectiveness due to highly conductive adhesive tape.
OEasy cutout or configuration for optimum shielding effectiveness.
Customer demands special parts made of all foils and laminates:
Feature
CONDUCTIVE TAPE
/
CCT
Custom Parts
Dimension Supporting Base
10 33 CCT-10-C CCT-10-A CCT-10-CS
15 33 CCT-15-C CCT-15-A CCT-15-CS
20 33 CCT-20-C CCT-20-A CCT-20-CS
25 33 CCT-25-C CCT-25-A CCT-25-CS
50 33 CCT-50-C CCT-50-A CCT-50-CS
Other width available upon request
width (mm) length (mm) Soft – Copper Soft – Aluminium Soft – Copper doublesided tin-coated
Thin film
Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
Metal foil
87
CONDUCTIVE T
APES & SHEETS
OBase material: PET film (75µm)
OSurface protection film (green)
Conductive layer (ITO film)
Surface protection film (clear)
Usable for EMC measures around liquid crystal displays and as
various kinds of electrodes
OITO, Indium Tin Oxide, conductive film has superior optical transparency.
OProtected by PE film on both surfaces.
OGrounding terminal with aluminum foil can be provided upon
Feature
Material
Clear Conductive Film (WINAL75-080)
Ω/□ 80 % 76 μm 75 dB (100MHz) ℃ ―30℃∼80℃ UL94 VTM−2 0 20 40 60 80 100 0.1 1 10 100 1000 S H IE L D IN G E F F E C T IV E N E S S ( d B )
Item Unit Value Surface resistance Total light transmittance Thickness Shielding effect Surface temperature range for use Flame retardancy
※All specifications and characteristics shown herein are typical values, but are not guaranteed.
All specifications and characteristics shown herein are subject to change without notice for improvements or changes in specification.
Surface protection film (green)
Conductive layer (ITO film)
Base material: PET film (75μm)
Surface protection film (clear)
Electric shielding properties(KEC)
FREQUENCY(MHz)
Hole punching
Aluminium foil
Cutting in any size ● Attaching adhesive tape
(aluminium or copper foil) ● Cutting in any size ● Holepunching 〈KEC Method〉 over 20
Shielding
Structure
Properties
Additional
AlternativeMetal foil
Thin film
Tra
ns
pa
re
nt
co
nd
uc
tiv
e fi
lm
Ele
ctr
ica
lly
co
nd
uc
tiv
e f
ab
ric
88
CONDUCTIVE T
APES & SHEETS
OBase material / PPS
OMetal membrane / SUS・Cu
Super-thin surface-conductive film
OOverall thickness 35
µ
m (-SC).OProvides high-shielding effectiveness and galvanic corrosion resistance.
OSafer handling compared with metal foil tapes.
OSuitable noise control for flexible cables.
Feature
Material
REMILESS
/
REMI
Property
1) Measured in film state
2) Double-sided adhesive tape excluded
REMI-SC REMI-AC Surface resistivity 1 (1/) <0.5 Shielding properties (dB) >50 Overall thickness (mm) 0.035 0.055
Flame retardant 2 UL510 FR REMI-SC(Surface conductive type) REMI-AC(Adhesive layer conductive type)
SUS Cu SUS
Base material(PPS) Release liner
Double-sided adhesive tape
Cu SUS Base material(PPS) Conductive adhesive Release liner SUS REMILESS SC boards
Application example) Shielding small boards using metal membrane face Application example) Shielding and frame-grounding for FPC boards REMILESS AC FG、GND FG, GND, etc. FPC Connect with LCP or other PC boards 80 70 60 50 40 30 20 10 0 100 1000 10000 Shielding effectiveness (dB) frequency (MHz)