• No results found

1.4 to 2 GHz

Design and Characterization of a 5 2 GHz/2 4 GHz Fractional  Frequency Synthesizer for Low Phase Noise Performance

Design and Characterization of a 5 2 GHz/2 4 GHz Fractional Frequency Synthesizer for Low Phase Noise Performance

... For modern multistandard applications, it is often diffi- cult to cover multiple frequency bands using classical integer- N frequency synthesizers whose step size is limited by the ref- erence frequency. In order to ...

11

Continuum sources from the THOR survey between 1 and 2 GHz

Continuum sources from the THOR survey between 1 and 2 GHz

... have: 1) a high ratio between 20 cm continuum and 21 µm flux density; 2) a counterpart at 90 cm continuum emission; and 3) a distinctive SNR morphology, ...

25

A Survey on Interference Mitigation Techniques for 2 4 GHz ISM Band

A Survey on Interference Mitigation Techniques for 2 4 GHz ISM Band

... technique to mitigate interference in the environment. From various study, it is found that usage of common spectrum suffers from interference and effective interference mitigation mechanism is needed for the ...

5

Compact 3D Monopole Antenna for Different Wireless Communication Applications

Compact 3D Monopole Antenna for Different Wireless Communication Applications

... 1.8 GHz, 2.1 GHz, 2.4 GHz, 3.1 GHz, 3.5 GHz, ...5.2 GHz, 5.8 GHz and ...At 1 GHz, the radiation pattern corresponds to a monopole antenna in the XZ and XY ...

9

A 2-4 GHz
 Octave Bandwidth GaN
 HEMT Power Amplifier with High Efficiency

A 2-4 GHz Octave Bandwidth GaN HEMT Power Amplifier with High Efficiency

... A complete procedure to design a broadband power amplifier is presented in this paper. It includes the design of broadband matching network, transistor package modeling and the proposed simulation strategy of ADS and ...

8

MINIATURIZED MICROSTRIP DUAL PATCH ANTENNA FOR 2 4 GHZ WIFI APPLICATIONS

MINIATURIZED MICROSTRIP DUAL PATCH ANTENNA FOR 2 4 GHZ WIFI APPLICATIONS

... There are many works were conducted on the patch antenna for WiFi applications. All of the related works focus on the miniaturized features of the antenna design, and the Onmi- directional raditation of the designed ...

6

t2451 2-4 GHz Cordless Telephone

t2451 2-4 GHz Cordless Telephone

... The RBRC Seal on the nickel-cadmium battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when ...

44

MIMO Reconfigurable Antennas for Wi Fi 2 4 GHz Communication

MIMO Reconfigurable Antennas for Wi Fi 2 4 GHz Communication

... Wireless communication is in the verge of technological evolution as we are approaching towards adjusting ourselves with very high speed of Internet as we move from 4G to 5G communication. Nowadays, communication plays a ...

8

RF 
		receiver subsystem design at 2 4 GHz frequency using microstrip lines

RF receiver subsystem design at 2 4 GHz frequency using microstrip lines

... There are three main existing approaches to realize a band pass filter. The first is micro strip or coplanar waveguide (CPW) multiple-mode resonator (MMR) with the assistance of a coupling mechanism. Secondly, a ...

5

Design and Analysis of 2X2 MIMO System for 2 4 GHz ISM Band Applications

Design and Analysis of 2X2 MIMO System for 2 4 GHz ISM Band Applications

... MIMO technology has attracted attention in wireless communications, because it offers significant increases in data throughput and link range without additional bandwidth or transmit power. It achieves this by higher ...

5

A Miniaturized Quasi-Self-Complementary UWB Antenna with Band-Rejection Characteristic

A Miniaturized Quasi-Self-Complementary UWB Antenna with Band-Rejection Characteristic

... (3.18 GHz) is obtained with a compact size (9 × 17.5 × 1 mm 3 ...below 2 : 1 VSWR is from 3.18 GHz to 13.4 GHz with a rejection band from ...5.45 GHz to 5.95 GHz, ...

6

1′ Methyl 4′ (1 naphth­yl) 1′′,2′′,3′′,4′′ tetra­hydro­indane 2 spiro 2′ pyrrolidine 3′ spiro 2′′ naphthalene 1,3,1′′ trione

1′ Methyl 4′ (1 naphth­yl) 1′′,2′′,3′′,4′′ tetra­hydro­indane 2 spiro 2′ pyrrolidine 3′ spiro 2′′ naphthalene 1,3,1′′ trione

... O1 0.0718 (9) 0.0584 (8) 0.0577 (8) 0.0018 (8) −0.0114 (7) 0.0189 (7) O2 0.0855 (12) 0.0406 (7) 0.0750 (10) 0.0010 (8) −0.0074 (9) 0.0104 (7) O3 0.0616 (8) 0.0629 (8) 0.0400 (6) 0.0169 (7) 0.0096 (6) 0.0150 (6) N1 0.0374 ...

11

4 [3 Benzoyl 4 (4 chloro­phen­yl) 1 methyl­pyrrolidin 2 yl] 1 (4 meth­oxy­phen­yl) 3 phenyl­azetidin 2 one

4 [3 Benzoyl 4 (4 chloro­phen­yl) 1 methyl­pyrrolidin 2 yl] 1 (4 meth­oxy­phen­yl) 3 phenyl­azetidin 2 one

... C8 0.0725 (15) 0.130 (3) 0.0869 (18) −0.0119 (16) 0.0327 (13) 0.0131 (18) C9 0.0622 (12) 0.0796 (16) 0.0643 (13) −0.0096 (11) 0.0163 (10) 0.0088 (11) C10 0.0466 (9) 0.0493 (11) 0.0507 (10) −0.0076 (8) 0.0062 (7) −0.0022 ...

10

1 [4 (Prop 2 en 1 yl­­oxy)benz­yl] 2 [4 (prop 2 en 1 yl­­oxy)phen­yl] 1H benzimidazole

1 [4 (Prop 2 en 1 yl­­oxy)benz­yl] 2 [4 (prop 2 en 1 yl­­oxy)phen­yl] 1H benzimidazole

... C15 0.0200 (6) 0.0194 (6) 0.0234 (6) −0.0025 (5) 0.0051 (5) −0.0034 (5) C16 0.0201 (6) 0.0178 (6) 0.0126 (5) 0.0009 (5) 0.0012 (4) −0.0012 (4) C17 0.0190 (6) 0.0200 (6) 0.0155 (6) −0.0011 (5) 0.0035 ...

9

Wideband Frequency Selective Surface with a Sharp Band Edge Based on Mushroom-Like Cavity

Wideband Frequency Selective Surface with a Sharp Band Edge Based on Mushroom-Like Cavity

... As spatial filters in microwave and optics, frequency selective surfaces (FSSs) are composed of periodic structures in two dimensions [1–3]. The FSS technology has been widely applied to the design of low-RCS ...

6

4 (4 Methyl­phen­yl) 2 (prop 2 yn 1 yl)phthalazin 1(2H) one

4 (4 Methyl­phen­yl) 2 (prop 2 yn 1 yl)phthalazin 1(2H) one

... The ORTEP of the title compound is shown (Fig. 1). The phthalazine ring is nearly planar. The dihedral angle between the methylphenyl ring and the phenyl ring of the phthalazinone moiety is 53.93 (9)°. The bond ...

8

2 (4 Hy­droxy­styr­yl) 1 methyl­pyridinium 4 meth­oxy­benzene­sulfonate

2 (4 Hy­droxy­styr­yl) 1 methyl­pyridinium 4 meth­oxy­benzene­sulfonate

... In the crystal packing of (I), the cations and anions are arranged in layers approximately parallel to the (011) plane (Fig. 2). The cations and anions are linked through O—H O and C—H O hydrogen bonds, and C—H ...

9

1 (4 Meth­oxy­phenyl) 2 (2 nitro­phen­oxy)­propan 1 one

1 (4 Meth­oxy­phenyl) 2 (2 nitro­phen­oxy)­propan 1 one

... Data collection: CAD-4 EXPRESS (Enraf±Nonius, 1994); cell re®nement: CAD-4 EXPRESS; data reduction: XCAD4 (Harms & Wocadlo, 1995); program(s) used to solve structure: SHELXS97 (Sheldrick, 1997); ...

8

2 [(E) 2 (4 Eth­­oxy­phen­yl)ethen­yl] 1 methyl­quinolinium 4 fluoro­benzene­sulfonate

2 [(E) 2 (4 Eth­­oxy­phen­yl)ethen­yl] 1 methyl­quinolinium 4 fluoro­benzene­sulfonate

... refined site-occupancy ratio of 0.610 (6):0.390 (6). The cation exists in an E configuration with respect to the ethenyl bond [C10 ═C11 = 1.326 (18) Å for the major A component and 1.38 (3) Å for the minor B component] ...

12

1 (4 Amino­phen­yl) 2 (4 nitro­phen­yl)ethanone

1 (4 Amino­phen­yl) 2 (4 nitro­phen­yl)ethanone

... C1 0.0172 (15) 0.0186 (15) 0.0102 (19) −0.0052 (12) 0.0001 (12) 0.0015 (12) C2 0.0123 (14) 0.0191 (15) 0.026 (2) 0.0008 (13) −0.0035 (12) 0.0003 (14) C3 0.0164 (14) 0.0159 (14) 0.0179 (19) −0.0002 (11) 0.0023 (12) ...

6

Show all 10000 documents...

Related subjects