Adhesion between Layer Materials and the Substrate
Effect of Cr Diffused Layer Formed by AIH FPP Treatment on Adhesion of DLC Films to a Carbon Steel Substrate
... diffused layer at the surface of the substrate was stable and maintained a low value from the onset of the test until the ...diffused layer, Fe, the main component of the substrate, was ...
6
Molecular Dynamics Simulation of Grain Growth of Cu Film —Effects of Adhesion Strength between Substrate and Cu Atoms—
... (Received September 28, 2009; Accepted December 2, 2009; Published January 27, 2010) Keywords: molecular dynamics simulation, copper film, LSI (large scale integrated circuit), grain growth 1. Introduction In the ...
6
Adhesion characterization of SiO2 thin films evaporated onto a polymeric substrate
... Functional Materials, LGP-ENIT-INP, University of Toulouse, France 1,2,6,7 Thin Films Group, R&D Physico-Chemistry, Essilor International, France Abstract— To ensure good adhesion between a 200 ...
10
Adhesion of Germanium Electrode on Nickel Substrate for Lithium Ion Battery Applications
... ductile substrate could be the reason for such high G ...previous adhesion studies of thin brittle films under a state of compression over ductile ...
83
Modification of a single-solvent-based gravure ink for enhance wettability and substrate adhesion
... This Thesis is brought to you for free and open access by the Thesis/Dissertation Collections at RIT Scholar Works. It has been accepted for inclusion in Theses by an authorized administrator of RIT Scholar Works. For ...
110
Uncovering a Role for the Tail of the Dictyostelium discoideum SadA Protein in Cell-Substrate Adhesion
... cell-substrate adhesion, also compromises the F-actin cytoskeleton as well as processes that are dependent on an intact cytoskeleton, such as cytokinesis and phagocytosis ...link between SadA and ...
10
Organic ultrathin film adhesion on compliant substrate using scratch test technique
... the adhesion are of great importance to understand the reliability of Organic Thin Film Transistor (OTFT) on compliant ...Many adhesion test techniques have been developed to measure adhesion energy ...
15
Mechanical adhesion of SIO2 thin film on a polymeric substrate under compressive stress
... access adhesion is made according to compatibility with system under study, repeatability, ease of implementation, cost effectiveness and representativeness of defects observed in real life versus defects ...
11
Evaluation of thin film adhesion to compliant substrate by the analysis of progressive buckling in fragmentation test
... coating/compliant substrate system is estimated based on the evolution of coating buckle patterns in the fragmentation ...interface adhesion and the total energy release rate, which includes the plastic ...
5
Microstructure and adhesion characteristics of a silver nanopaste screen printed on Si substrate
... Figure 6 reveals the influence of the sintering tem- perature on the electrical resistivity of the Ag nanopaste. The electrical resistivity dramatically decreased with the increasing sintering temperature, implying a ...
6
Influence of added concrete compressive strength on adhesion to an existing concrete substrate
... strength between two concrete layers of different ages, considering different mixtures of added concrete, with different ...the substrate surface increased by sand ...the substrate concrete improves ...
6
Utilising non-pathogenic bacteria as a substrate for mesenchymal stem cell adhesion and differentiation
... 1991, Aumailley and Gayraud 1998, Hench and Polak 2002, Shin, Jo et al. 2003). These surfaces are static and provide cells with only one behavioural cue, therefore engineering dynamic surfaces that allow controlled ...
206
Adhesion between oppositely-charged polyelectrolytes
... For adhesion measurements, two different set-ups were ...experiments between a PDMAEMA brush and PMAA gel, the experiments were performed in a liquid cell situated between a lamp and a high ...
28
Changes in materials properties explain the effects of humidity on gecko adhesion
... gecko adhesion system is a fascinating confluence of the biological and materials ...the materials properties produced by atmospheric moisture will alter the conditions for detachment of gecko ...
6
Mechanics of Micro-Structured Soft Materials and Their Applications in Adhesion and Wetting
... the adhesion strength can be rapidly ...contact adhesion resulting from millions of hierarchical fibrillar structures on its toe pads via the weak non-covalent van der Waals force and/or capillary ...and ...
166
Growth of Zinc Oxide Nanorods Using Various Seed Layer Annealing Temperatures and Substrate Materials
... different substrate materials (silicon, glass, and fluorine doped tin oxide (FTO) coated ...the substrate material at a fixed seed annealing ...silicon substrate exhibited better crystallinity ...
10
Effect of Difference in Young's Moduli between Surface Layer and Substrate on Fatigue Strength
... the substrate on the fatigue strength were ...titanium layer remarkably improved the fatigue strength of pure ...titanium layer was caused by the reduction in the remote applied stress and image ...
6
Deposited on Substrate With or Without A Window Layer:
... window layer for a homojunction with a window layer and deposited by CuInSe 2 (N)/CuInSe 2 (P)/CdTe(P + ) ...field between 0 and 2000Vcm -1 the quantum efficiency remains almost ...window ...
8
Layer Adhesion Investigation Of 3D Printer Platform
... process, layer adhesion is the bond between the first layers of product printed with the platform of the ...better adhesion in order to avoid or reduce the possibilities of damage to the ...
24
Formation of Inter Diffusion Layer between NiCrAlY Coating and Nb Substrate during Vacuum Heat Treatment
... inter-diffusion layer between NiCrAlY coating and Nb substrate during vacuum heat treatment was ...Nb substrate by cathode arc ...inter-diffusion layer and the results were interpreted ...
5