Chloride solutions
A Novel Electrospinning Application for Polyvinyl Chloride Nanofiber Coating Deposition as a Corrosion Inhibitor for Aluminum, Steel, and Brass in Chloride Solutions
... EIS technique provides important mechanistic and kinetic information for an electrochemical system under investigation [46,47,54-59]. The method was successfully employed to explain the pitting and passivation phenomena ...
15
Effects of Sulfur Addition on the Formation of Inclusions and the Corrosion Behavior of Super Duplex Stainless Steels in Chloride Solutions of Different pH
... in chloride solutions of different pH and the reasonable nitrogen factor in the PREN equation, a metallo- graphic examination, potentiodynamic & potentiostatic polar- ization tests, scanning electron ...
10
Electrochemical Studies on the Corrosion Behavior of API X65 Pipeline Steel in Chloride Solutions
... The corrosion of API X65 pipeline steel in 3.5% sodium chloride solutions after 1 h and 24 h immersion has been reported. The study was performed using a variety of conventional and nonconventional ...
11
Volume temperature relationships of some rare earth chloride solutions
... lanthanum chloride and neodymium chloride solutions were determined at five degree temperature intervals from 20 to ...lanthanum chloride solutions ranging ...
191
Effects of Graphite on the Corrosion Behavior of Aluminum-Graphite Composite in Sodium Chloride Solutions
... NaCl solutions was carried out using cyclic potentiodynamic polarization (CPP), chronoamperometry (CA), and electrochemical impedance spectroscopy ...the chloride solutions before measurements was ...
15
Corrosion and Corrosion Inhibition of Pure Iron in Neutral Chloride Solutions by 1,1'-Thiocarbonyldiimidazole
... The anodic reactions on iron surface after 1 h and 24 h in chloride solutions at the same condition were reported in the previous study [1]. In brief, the polarization curve for iron (Fig. 4a) shows a short ...
16
Corrosion behaviour of low carbon steel in acidic and acidic-chloride solutions
... sodium chloride and 1M sulphuric acid with10% sodium chloride were using conventional weight loss method and potentiodynamic ...of chloride to the sulphuric acid reduces the corrosion potential, ...
5
Acoustical study of aqueous manganese chloride solutions at varying temperatures by ultrasonic technique
... non-aqueous solutions of transition and inner transition metal ions by ultrasonic technique at ...aqueous solutions of tetra hydrated MnCl 2 at different ...
7
THE RENAL RESPONSE TO INTRAVENOUS INJECTION OF SODIUM CHLORIDE SOLUTIONS IN MAN
... The filtration rate, renal plasma flow and excretion of sodium chloride, potassium and water were followed for eight or more clearance periods 210 minutes after the intravenous administr[r] ...
8
Effect of pH on the Corrosion Behavior of Aluminium Alloy Welded Plate in Chloride Solutions
... The corrosion behavior of AA2219-T87 GTA welded plate has been investigated in near neutral and in alkaline chloride containing solutions by electrochemical techniques. The general and pitting corrosion ...
7
Ion Association in Lanthanide Chloride Solutions
... aqueous solutions. As stated above, however, there are consid- erable activation energies to forming these species and so con- centrations are likely to be very low; nonetheless, the data do show that ...
16
Nanopore detection of DNA molecules in magnesium chloride solutions
... As we know, counterions in solutions can bind to DNA molecules, which may provide a drag force on the DNA and reduce the translocation speed. Dekker's group found that DNA translocation time in LiCl salt solution ...
8
Electrochemical Corrosion Behavior of 2205 Duplex Stainless Steel Welds in Chloride Solutions
... aqueous chloride environments such as in desalination plants [21,22], the effect of sensitization on their pitting corrosion tendency has attracted intense ...
11
Effect of Microcracks on the Corrosion Behaviour of Fe-based amorphous coatings in Chloride Solutions
... of chloride ions and the decline of pH value can decrease the pitting potential of stainless steel, while the pitting potential of amorphous coating is unaffected ...
13
Research on the Carbonization Process of Potassium Chloride Solutions in the Presence of Diethylamine
... potassium chloride UE DPFP, reactive DEA, carbon dioxide and ...potassium chloride, diethylamine (DEA) and water was fed into the carbonization reactor and carbon dioxide was passed in for 5-40 minutes at a ...
5
The Influence of Alternating Current on the Anodic Behaviour of Platinum100-105
... on the corrosion of anodically polarised platinum in sodium chloride solutions, using capacitance and resistance measurements to study the formation and destruction of oxid[r] ...
6
Intermobility of barium, strontium, and lead in chloride and sulfate leach solutions
... in chloride solutions [5, 20, 32], and in sul- fate solutions [20] has been determined, as has extrac- tion and biosorption of Sr in the environment [14, ...31], chloride solu- tions [4, 5, 7, ...
23
Some aspects of the solution chemistry of titanium (III)
... The aim of this present work has been to investigate in more detail the hydrolysis of the hexaquotitaniumIII ion in chloride solutions and to study the nature of the titaniumIII complexe[r] ...
158
Wettability of Sodium Chloride Aqueous Solutions on SUS304 Stainless Steel with Current Flow
... aqueous solution, an electrical double layer (EDL) generally forms at the liquid/solid interface. This EDL model was first proposed by Helmholtz and was subsequently developed by Gouy, Ahapman, Stern and Grahame. 21,22) ...
7
Effect of Surfactants on the Corrosion Behavior of Aluminum in Acid Solutions Containing Chloride Ions
... Due to the ability of the surfactants to adsorb on the surfaces, they should be effective corrosion inhibitors. The surfactant inhibitors have many advantages such as high inhibition efficiency, low price, low toxicity ...
7