• No results found

Composite Resin

Comparative evaluation of fluoride release and shear bond strength of a polyacid - modified composite resin, a resin modified glass ionomer cement and a conventional composite resin: An Invitro study

Comparative evaluation of fluoride release and shear bond strength of a polyacid - modified composite resin, a resin modified glass ionomer cement and a conventional composite resin: An Invitro study

... a resin reinforced glass ionomer (Fuji Ortho LC,) and compared it with a more traditional light-cured bonding system (Transbond,) that contained resin material ...light-cured resin- reinforced glass ...

101

Ultrasonic Inspection of Composite Resin Restorative Materials

Ultrasonic Inspection of Composite Resin Restorative Materials

... One of the important conditions for composite resin applications is stress, which has significant influence on the life time of most structures. The life time is a function of structure fracture sustaining. ...

5

In-vitro Shear Bond Strength of a Nano-composite Resin in Comparison with Microfilled and Microhybrid Composite Resins

In-vitro Shear Bond Strength of a Nano-composite Resin in Comparison with Microfilled and Microhybrid Composite Resins

... microfilled composite resin exhibited the lowest mechanical properties and nanofilled resin composites showed mechanical properties as good as those of universal hybrids and therefore can be used in ...

6

Clinical Evaluation Of Direct Composite Resin And Indirect Micro Ceramic Composite Resin Restorations In Class-I Cavity Of Permanent Posterior Teeth

Clinical Evaluation Of Direct Composite Resin And Indirect Micro Ceramic Composite Resin Restorations In Class-I Cavity Of Permanent Posterior Teeth

... direct composite restoration mainly depends on the polymerization ...direct composite restorations and indirect micro ceramic composite restorations in occlusal surface of permanent posterior teethof ...

7

Assessment of the Quality of Composite Resin Restorations

Assessment of the Quality of Composite Resin Restorations

... 1990’s, composite resin was the material of choice for anterior restorations due to the fulfillment of the esthetic expectations of ...of composite materials for aesthetic reasons; even in pos- ...

8

Bonding of CAD/CAM lithium disilicate restorations with regular and flowable composite resin with and without wetting resin

Bonding of CAD/CAM lithium disilicate restorations with regular and flowable composite resin with and without wetting resin

... the resin cement in the inner etched and silanated ceramic ...adhesive resin to wet the ...the resin-ceramic bond [11, 12], but these effects still require ...restorative composite ...

9

Evaluation of Shear Bond Strength of Methacrylate- and Silorane-based Composite Resin Bonded to Resin-Modified Glass-ionomer Containing Micro- and Nano-hydroxyapatite

Evaluation of Shear Bond Strength of Methacrylate- and Silorane-based Composite Resin Bonded to Resin-Modified Glass-ionomer Containing Micro- and Nano-hydroxyapatite

... lorane-based composite resin to ...silorane-based composite resin (Filtek LS) to RMGI versus Z250/Adper Scotch Bond ...silorane composite resin had sig- nificantly lower bond ...

7

Microleakage of Nanofilled Composite Resin Restorative Material

Microleakage of Nanofilled Composite Resin Restorative Material

... dental composite resins has not been previously ...nanofilled composite resin in comparison to the conventional hy- brid ...hybrid composite restorative ...hybrid composite restorations ...

6

Comparative Evaluation of the Push-Out Bond Strength of Glass Fiber Reinforced Composite Resin Post and Modified Polyetheretherketone (PEEK) Post following Surface Treatments: An In Vitro Study

Comparative Evaluation of the Push-Out Bond Strength of Glass Fiber Reinforced Composite Resin Post and Modified Polyetheretherketone (PEEK) Post following Surface Treatments: An In Vitro Study

... Sandblaster (Ideal blaster 1510) was employed in the present study to carry out the sandblasting of the prefabricated glass fiber reinforced composite post and customized modified (PEEK)post with 50µm Al203 ...

142

Assessment of microleakage of class V restored by resin composite and resin-modified glass ionomer and pit and fissure resin-based sealants following Er:YAG laser conditioning and acid etching: in vitro study

Assessment of microleakage of class V restored by resin composite and resin-modified glass ionomer and pit and fissure resin-based sealants following Er:YAG laser conditioning and acid etching: in vitro study

... After cavity preparation, the enamel, dentin, and cement were each treated with 35% phosphoric acid (Ultra-Etch®; Ultradent Products, Inc., South Jordan, UT, USA) for 10 to 20 seconds. The cavity was rinsed thoroughly ...

10

Protection and Reinforcement of Tooth Structures by Dental Coating Materials

Protection and Reinforcement of Tooth Structures by Dental Coating Materials

... a resin coating can serve as a means to protect dental structure after preparation of the tooth for indirect restorations, sealing the exposed ...The resin coating is applied on the cut surfaces immediately ...

11

Influence of ozonated water application on resin composite adhesive resistance

Influence of ozonated water application on resin composite adhesive resistance

... Objective: To evaluate the influence of different cleaning solutions on the bond strength of an adhesive system and a composite resin. Method: 80 bovine dental crowns were selected, divided into four groups ...

5

Bisphenol A and Related Compounds in Dental Materials

Bisphenol A and Related Compounds in Dental Materials

... of resin-based dental sealants and com- posites that are increasingly used in both preventive and restorative oral health ...of composite resin den- tal materials for fillings was stimulated by demand ...

11

Esthetic smile rehabilitation of anterior teeth by treatment with biomimetic restorative materials: a case report

Esthetic smile rehabilitation of anterior teeth by treatment with biomimetic restorative materials: a case report

... of resin composite; (C) installation of nonimpregnated gingival retraction cord; (D) acid etching of the enamel for 30 seconds and dentin for 15 seconds (35% phosphoric acid); (E) rinsing for 30 seconds; ...

5

Effect of four different conditioners on the shear bond strength of composite to glass ionomer: An In vitro study

Effect of four different conditioners on the shear bond strength of composite to glass ionomer: An In vitro study

... The seven specimens of each of the five groups were stored in distilled water for 24 hours at 37 o C. In order to measure shear bond strength, the specimens were placed in between the jigs of the universal testing ...

91

Does the use of a novel self-adhesive flowable composite reduce nanoleakage?

Does the use of a novel self-adhesive flowable composite reduce nanoleakage?

... able composite resins have become very appealing to daily practice and are usually recommended for the restoration of these cavities as an effective replacement for conventional composite resin ...

10

Comparison of access-hole filling materials for screw retained implant prostheses: 12-month in vivo study

Comparison of access-hole filling materials for screw retained implant prostheses: 12-month in vivo study

... Some studies analyzed the effectiveness of a ceramic inlay to restore an access hole [38]. Above the screw, a channel of 3 to 4 mm is needed to achieve this tech- nique and in some clinical situations, there is less than ...

8

Onlay preparation techniques   clinical practice guidelines

Onlay preparation techniques clinical practice guidelines

... reinforced composite resin was introduced as a dental restorative composite ...direct composite restorations are now intended to be used in high stress bearing areas especially in ...dental ...

5

Spectrophotometric Evaluation of Colour Stability of Nano Hybrid Composite Resin in Commonly Used Food Colourants in Asian Countries

Click here to download PDF version of the article !

... of composite restorations is colour ...of composite during its service ...of composite resin discolourations [3]: 1) Extrinsic discolouration: This is caused by the accumulation of plaque and ...

5

Flowable Resin Composites: A Systematic Review and Clinical Considerations

Click here to download PDF version of the article !

... Radiopacity is an essential property which allows the dentist to distinguish radio graphically, existing restorations and primary caries, to evaluate contours, overhangs, and major voids in restorations, and to assist in ...

7

Show all 9856 documents...

Related subjects