• No results found

cylinder liner

Failure Investigation and Thermo-Mechanical Analysis of Cylinder Liner Shekhar Shinde, Dr. P. V. Jadhav

Failure Investigation and Thermo-Mechanical Analysis of Cylinder Liner Shekhar Shinde, Dr. P. V. Jadhav

... type cylinder liner the outside is in direct contact with water which is not in dry type cylinder ...Dry liner is simpler to replace and there is no danger of water leakage in to either ...

6

Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine

Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine

... of cylinder liners with assistance of comparing the different texturing methods for better understanding of wear mechanisms and lubrication per- ...between cylinder liner and piston ring provides a ...

10

Simulation and Modeling of Friction Force and Oil Film Thickness in Piston Ring – Cylinder Liner Assembly of an I. C. Engine

Simulation and Modeling of Friction Force and Oil Film Thickness in Piston Ring – Cylinder Liner Assembly of an I. C. Engine

... A significant contribution of the total power loss in a reciprocating engine is due to piston ring and cylinder liner friction. On the other hand, durability of engine materials for improved friction and ...

6

Cavitation in the cylinder-liner and piston-ring interaction in internal combustion engines

Cavitation in the cylinder-liner and piston-ring interaction in internal combustion engines

... In 2005 Dellis was another one of the researcher that used Ostovar’s test-rig to investigate the oil film thickness between the cylinder liner and piston-ring interaction. Dellis attempt to add value to the ...

244

Optimization of Diesel Engine Cylinder Liner Undercut

Optimization of Diesel Engine Cylinder Liner Undercut

... of cylinder liner can be assumed to be an axisymmetric body with radial symmetry because it is circular ...of liner is stress analysis were to obtain the stress distributions in the liner and ...

7

Centrifugal Casting Technology for Cylinder Liner Based on Data Fusion Technology

Centrifugal Casting Technology for Cylinder Liner Based on Data Fusion Technology

... engine cylinder liner casting, the temperature is an important technical ...the cylinder liner casting control system is used to monitor and fusion the bearing vibration and the main shaft ...

11

Pneumatic Multi Cylinder Liner Puller

Pneumatic Multi Cylinder Liner Puller

... the liner which tends to induce thermal stresses and the liner has to withstandthose as ...the liner surface is also resistant to wear and ...typical cylinder liner which is resting on ...

7

An experimental and numerical investigation of frictional losses and film thickness for four cylinder liner variants for a heavy duty diesel engine

An experimental and numerical investigation of frictional losses and film thickness for four cylinder liner variants for a heavy duty diesel engine

... At the reversal point the value of r at all grid points was set to 1. The reason for this is as fol- lows. As the ring slides a cavitated region is formed in the diverging outlet section of the ring. As the ring changes ...

20

Characterising the friction and wear between the piston ring and cylinder liner based on acoustic emission analysis

Characterising the friction and wear between the piston ring and cylinder liner based on acoustic emission analysis

... the cylinder liner and piston ring using acoustic emission (AE) ...the cylinder block of the testing en- ...and cylinder liner than using standard ...

9

Strength Comparison of Cylinder Liner for different materials using Ansys

Strength Comparison of Cylinder Liner for different materials using Ansys

... chamber liner is ...chamber liner geometry are ...of liner is 6mm, the joined pressure following up on chamber liner expanded ...barrel liner, so strain vitality is ...

7

Analysis of Cooling Fluid Interaction and Force Generated in a Piston Cylinder Assembly

Analysis of Cooling Fluid Interaction and Force Generated in a Piston Cylinder Assembly

... the cylinder liner sway powers are prompt • The cylinder contacts the chamber bore are the top as well as the base of the cylinder ...the cylinder with the goal of having a moving ...

7

Effect of Lubricating Oil on Tribological behaviour in Pin on Disc Test Rig

Effect of Lubricating Oil on Tribological behaviour in Pin on Disc Test Rig

... the cylinder wall is undoubtedly the largest contribution to friction in a power train ...ring/engine cylinder bore system are important in achieving desired engine efficiency and durability in terms of ...

10

“Comparative investigation of vibration analysis of VCR diesel engine for different types of grey cast iron

“Comparative investigation of vibration analysis of VCR diesel engine for different types of grey cast iron

... engine cylinder liner including 2-dimensional and 3-dimensional ...3-dimensional liner are consisting of thickness of cylinder and stroke length of ...of cylinder liner ...

7

Locomotive cooling system strategy optimisation

Locomotive cooling system strategy optimisation

... List of Figures Figure 2-1 Galvanic corrosion of steel pipe in a brass fitting Figure 2-2 Pitting corrosion in a metal Figure 2-3 Cavitation on a cylinder liner Figure 2-4 Particle erosi[r] ...

128

Vibration Analysis in Diesel Engine Using Combustion Gas Forces

Vibration Analysis in Diesel Engine Using Combustion Gas Forces

... Finite element models were created based on the geometry of the system assembly. The modelling and simulation was carried out using the finite element software ANSYS [13]. For the problem use was made of a two ...

11

Plasma texturing for enhanced tribological performance of cast iron

Plasma texturing for enhanced tribological performance of cast iron

... Unlike the experiments that had been done before, the surface was not flat in this case, so that the nozzle we used before did not work here. A new nozzle should be designed in order to spray the electrolytes onto the ...

171

Design, Analysis and Performance Testing of a Diesel Engine as a Portable Electrical Generator

Design, Analysis and Performance Testing of a Diesel Engine as a Portable Electrical Generator

... Internal combustions engines are classified into two types namely, Rotary engines and Reciprocating engines. The reciprocating type of the engine has been designed in the following paper. Internal combustion engines ...

13

Vol 3, No 9 (2015)

Vol 3, No 9 (2015)

... A Cylinder liner is a cylindrical part to be fitted in to an engine block to form a cylindrical space in which the piston reciprocates very ...Generally cylinder liners are made of Cast Iron, Cast ...

9

Lubrication of a flexible piston skirt conjunction subjected to thermo-elastic deformation: A combined numerical and experimental investigation

Lubrication of a flexible piston skirt conjunction subjected to thermo-elastic deformation: A combined numerical and experimental investigation

... single cylinder 4-stroke engine is used throughout the investigations as a base for the measurements and for the predictive ...Single cylinder engines are inherently unbalanced with a plethora of engine ...

21

Experimental Investigations in a Locally Developed Insulated DI Diesel Engine with Newly Developed Lubricants with Paratone Additive

Experimental Investigations in a Locally Developed Insulated DI Diesel Engine with Newly Developed Lubricants with Paratone Additive

... piston, cylinder head, valves and cylinder ...piston, cylinder liner and ceramic coated cylinder head, valve) with brass material as piston insert [9,10] is developed and the brake ...

5

Show all 2185 documents...

Related subjects