• No results found

Discharge specific capacity

Multi-Walled Carbon Nanotubes Modified Li3V2(PO4)3/Carbon Composites with Enhanced Electrochemical Performances as Cathode Materials for Li-Ion Batteries

Multi-Walled Carbon Nanotubes Modified Li3V2(PO4)3/Carbon Composites with Enhanced Electrochemical Performances as Cathode Materials for Li-Ion Batteries

... LVPCs) are synthesized through the rheological phase reaction method using MWCNTs as a highly conductive agent. MWCNTs-LVPCs are characterized by X-ray diffraction, scanning electron microscopy, and transmission electron ...

9

The Effect of Calcination Time on the Electrochemical Performance of Spinel LiMg0.08Mn1.92O4 Prepared by a Solid- State Combustion Method

The Effect of Calcination Time on the Electrochemical Performance of Spinel LiMg0.08Mn1.92O4 Prepared by a Solid- State Combustion Method

... and specific capacity were not ...higher discharge specific capacity and electrochemical activity [36], which was consistent with the results from ...

12

Preparation of Reduced Graphene Oxide Aerogel and its Application in Lithium Sulfur Battery

Preparation of Reduced Graphene Oxide Aerogel and its Application in Lithium Sulfur Battery

... electrode. Discharge capacity of composite electrode improved when current density was restored to 500 mA·g -1 ...when discharge current density was reverted to 1000 mA/g (second times), electrode ...

14

Effect of Carbon Nanotubes on the Electrochemical Performance of LiFePO4 Particles in Lithium Ion Batteries

Effect of Carbon Nanotubes on the Electrochemical Performance of LiFePO4 Particles in Lithium Ion Batteries

... hydrothermal method with the assistance of ethylene glycol (EG).Then, the LFP/carbon nanotubes (CNTs) composite was synthesized in the process of final heat treatment. X-ray diffraction (XRD) and transmission electron ...

9

The Effect of Calcination Time on the Electrochemical Performance of Doped LiMg0.02Mn1.98O4 cathode Material Prepared by Solid-State Combustion Synthesis

The Effect of Calcination Time on the Electrochemical Performance of Doped LiMg0.02Mn1.98O4 cathode Material Prepared by Solid-State Combustion Synthesis

... initial discharge specific capacity and capacity retention tend to reduce after the increase with the increase of calcination ...higher capacity retention than that of pristine ...

8

Bio-Synthesis of LiFePO4/C composites for lithium ion battery

Bio-Synthesis of LiFePO4/C composites for lithium ion battery

... charge-discharge specific capacity have any remarkable reducing after 50 cycles at ...The discharge specific capacity at 5C has a slight fluctuation, but it does not reduce after ...

10

Predicting the Occurrence of Radon-222 in North Carolina Groundwater

Predicting the Occurrence of Radon-222 in North Carolina Groundwater

... Joint significance test for discharge, specific capacity, casing length, uncased length, controlling for rock type and geologic region. Significance test for rock type, controlling for[r] ...

64

Lithium-magnesium Alloy as an Anode for Lithium-Sulfur Based Batteries

Lithium-magnesium Alloy as an Anode for Lithium-Sulfur Based Batteries

... charge/discharge capacity curves and the cycling performance of the Li-Mg and pure Li anodes with the same sulfur cathode and a current rate of ...initial discharge capacity of the pure Li ...

6

Nanostructured LiMPO4 (M = Fe, Mn, Co, Ni) – carbon composites as cathode materials for Li-ion battery

Nanostructured LiMPO4 (M = Fe, Mn, Co, Ni) – carbon composites as cathode materials for Li-ion battery

... carbon supports (unordered nanofibers, foams). The composites have been prepared by coating the carbon structures in aqueous (or polyols) solutions containing lithium, metal ions and phosphates. After drying out, the ...

7

Mitigating Voltage Fade of 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 Cathode Materials Using a Mild Method for Lithium-ion Batteries

Mitigating Voltage Fade of 0.5Li2MnO3·0.5LiMn1/3Ni1/3Co1/3O2 Cathode Materials Using a Mild Method for Lithium-ion Batteries

... initial discharge specific capacity of ...irreversible capacity loss of 77 mAh·g -1 , and a reversible capacity of ...average discharge- voltage difference of ...the ...

13

Ultra-long Nanorods of Single-crystalline Na0.44MnO2 as Cathode Materials for Sodium-ion Batteries

Ultra-long Nanorods of Single-crystalline Na0.44MnO2 as Cathode Materials for Sodium-ion Batteries

... and discharge specific capacity of ...irreversible capacity loss can be seen from the charge and discharge curves, which is corresponding to the stronger oxidation peak during the first ...

12

Wind & Solar Power Systems pdf

Wind & Solar Power Systems pdf

... The economic size of the conventional power plant has been 500 MW to 1,000 MW capacity. These sizes could be justified in the past, as the entire power plant of that size, once built, would be fully loaded in just ...

350

Risks predicting prolonged hospital discharge boarding in a regional acute care hospital

Risks predicting prolonged hospital discharge boarding in a regional acute care hospital

... study. Discharge boarding time was defined as the discharge disposition order time to end of inpatient bed occupancy ...prolonged discharge boarding were discussed with hospital ...prolonged ...

9

Process modelling and analysis of intensified CO2 capture using monoethanolamine (MEA) in rotating packed bed absorber

Process modelling and analysis of intensified CO2 capture using monoethanolamine (MEA) in rotating packed bed absorber

... Specific heat capacity of component i in gas phaseJ/kmol.K Specific heat capacity of gas phase J/kmol.K Specific heat capacity of component i in lean MEA solution J/kmol.K Specific heat [r] ...

39

Preparation of lithium Li4Ti5O12-graphene composite as cathode for improving lithium battery performance

Preparation of lithium Li4Ti5O12-graphene composite as cathode for improving lithium battery performance

... the specific discharge capacity is only 46 mAh/g. The specific capacity decreasing with increasing multiplying power phenomenon may be due to the polarization of the ...

11

Synthesis and Electrochemical Performance of Nanosized Multiple-doped LiMn2O4 Prepared at Low Temperature for Li-ion Battery

Synthesis and Electrochemical Performance of Nanosized Multiple-doped LiMn2O4 Prepared at Low Temperature for Li-ion Battery

... high capacity at high currents, because diffusion path of Li + in the solid is significantly smaller than in electrodes of the same kind of materials with higher particle size ...reversible capacity and ...

12

A Self-Recoverable LiTi2(PO4)3/O2 Hybrid Cathode for Lithium- Oxygen Batteries with High Power Performance

A Self-Recoverable LiTi2(PO4)3/O2 Hybrid Cathode for Lithium- Oxygen Batteries with High Power Performance

... to discharge, proving that the LOHC shows a much better power performance than the ...the discharge voltage of Li-O 2 batteries while discharging at ...

12

High capacity surface route discharge at the potassium O2 electrode

High capacity surface route discharge at the potassium O2 electrode

... solvent, acetonitrile, allows us to directly probe the surface route. Rotating ring-disk electrode, electrochemical quartz crystal microbalance and scanning electron microscope characterisations clearly demonstrate the ...

10

Capacity Improvement of Tin-Deposited on Carbon-Coated Graphite Anode for Rechargeable Lithium Ion Batteries

Capacity Improvement of Tin-Deposited on Carbon-Coated Graphite Anode for Rechargeable Lithium Ion Batteries

... The Sn-deposited on graphite or carbon-coated graphite (cG) were successfully synthesized by a simple chemical reduction process at room temperature. The deposition of Sn NPs on substrates was confirmed by XRD, SEM, and ...

12

Integrated Polyaniline-coated CFx Cathode Materials with Enhanced Electrochemical Capabilities for Li/CFx Primary Battery

Integrated Polyaniline-coated CFx Cathode Materials with Enhanced Electrochemical Capabilities for Li/CFx Primary Battery

... can reach up to more than 10000 W Kg -1 at 8 C. All these can be attributed to the conductive polyaniline coating, which provides the exterior connectivity between particles for facile electron conduction, resulting in ...

10

Show all 10000 documents...

Related subjects