Ductile Cast Iron
Effect of Dynamic Strain Aging on Isothermal (473 K) Low Cycle Fatigue of Ferritic Ductile Cast Iron
... Fatigue behavior of ductile cast iron can be distinguished in three different temperature ranges (293–400 K, 400– 573 K, >573 K). When both velocities of dislocation slipping and mass transport of ...
6
Corrosion of Ductile Cast Iron Pipeline in a Water Supply Network Based on the Flow Field Changing
... the ductile cast iron is strongest at the outermost portion of the elbow, followed by the upstream section, the downstream section and the innermost portion of the ...
21
EFFECT OF HEAT TREATMENT PROCESSES ON DUCTILE CAST IRON MECHANICAL PROPERTIES - AN EXPERIMENTAL APPROACH
... SG iron to such an extent that it may overcome the properties shown by ...austempered ductile iron is considered a bright prospect having a good combination of properties ...conventional ...
6
Performance of commercial and palm oil lubricants in turning FCD700 ductile cast iron using carbide tools
... Jaharah, A.G., Azmi, M.N.M.R., Ab Rahman, M.N. and Che Haron, C.H., 2009. Machinability of FCD500 ductile cast iron using coated carbide tool in dry machining condition. International Journal of ...
9
Fabrication of High Chromium White Iron Surface Layers on Ductile Cast Iron Substrate by Laser Surface Alloying
... white iron surface layers (HWSLs) have been produced on a ductile cast iron EN-GJS-700-2 substrate by diode laser surface alloying with a direct injection of a pure chromium powder into the ...
10
Fracture Toughness and Tribological Wear Behaviour of Micro Alloyed Pearlitic- Ferritic Ductile Cast Iron
... on ductile iron by electric contact surface ...the ductile iron substrate that was not ...the iron as a result of the presence of ‘good’ ...chilled ductile iron in other ...
10
Study of Effect of Etching Time and Concentration on Microstructure of SG 400/12 Grade Ductile Cast Iron
... of ductile cast iron specimens based on image analysis and support vector machine XXIV Italian Group of Fracture Conference, 1-3 March 2017, Urbino, Italy ...
6
Dynamic Fracture Toughness Behaviour of Ductile Cast Iron with Respect to Structural Integrity Assessment (G016)
... Germany, ductile cast iron (DCI) is used for heavy-sectioned casks for radioactive ...on ductile cast iron from an original DCI container with a wide variety of micro- structure ...
8
Effect of Subzero Treatment on the Microstructure and Mechanical Properties of Austempered Ductile Cast Iron
... as-cast ductile iron and austempering and subzero-treated ductile cast iron were carried out by using an Instron machine type (Model EZ-S500, Japan) at cross head speed of ...
5
Fatigue Strength of Ferritic Ductile Cast Iron Hardened by Super Rapid Induction Heating and Quenching
... Ductile cast iron with spherical graphite is now widely noticed as one important structural material, because it is inexpensive and can easily form relatively complicated shaped ...Ferritic ...
6
Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant
... The commonly used quenchants are water, oil, brine, and synthetic solutions. Water though abundant and low cost has the drawback of inducing crack or dimensional changes on the quenched component due to its high cooling ...
12
Comparative Study and Stress Analysis on Brake Pedal using Ductile Cast Iron 350/140 and Al359 T0 Material
... Abstract: In a automotive vehicle, brake pedal acts a powerful component to decelerate and stop. When a person will apply a load on the pedal, stresses will be developed at the hinged point. In order to improve the ...
8
Microstructure Image Analysis for Estimating Mechanical Properties of Ductile Cast Iron
... A novel, efficient, automatic microstructure image analysis for estimating mechanical properties of ductile cast iron is proposed. The method is robust and computationally inexpensive. Any changes to ...
7
Fatigue Performance of Forged Steel and Ductile Cast Iron Crankshafts
... and ductile cast iron crankshafts which were in an unmachined state (as forged or ...the cast iron, both specimens were removed from the same end of the crankshaft, shown as the right ...
11
Influence of Silicon Content, Strain Rate and Temperature on Toughness and Strength of Solid Solution Strengthened Ferritic Ductile Cast Iron
... of iron strongly depends on the strain rate as well as temperature, and ductile-brittle tran- sition temperature of conventional ductile cast iron becomes ...
7
Effect of Heat Treatment on the Damping Capacity of Austempered Ductile Cast Iron
... ductile cast iron was transformed into a martensite micro- structure by the subzero ...austempered ductile cast ...austempered ductile cast ...austempered ductile ...
6
Lowest Fatigue Limit Estimation of Ductile Cast Iron Joints by Considering Maximum Defect Size Toward Replacing Welded Joints
... of ductile cast iron (DCI) specimens whose shapes are similar to the welded joint shapes is about three times larger than that of the welded joint ...
10
Effect of Thermal Conditions on Corrosion Behavior of Ductile Cast Iron
... in ductile cast iron (DCI) and improve its ...partial ductile fracture because of their quasi-cleavage features in the ambient environment and brittle-type cleavage fracture in brine ...
11
Influence of Semi Solid Isothermal Heat Treatment on Microstructure and Mechanical Properties of Ductile Cast Iron
... in iron/gra- phite interface areas that are relatively lower in carbon content result in decreasing of graphite grain ...of iron/graphite interface areas and the irregular low carbon area around graphite ...
6
OPTIMIZATION OF ABRASIVE MACHINING OF DUCTILE CAST IRON USING TIO
... The grinding process was undertaken using a Supertec precision grinding machine, model STP- 102ADCII. A vitrified bond aluminum oxide grinding wheel (PSA-60JBV) with an average abrasive size of 60 grains was used. The ...
6