Electroless Ni-P Composite Coating
Development of Electroless Ni-P-Al2O3 and Ni-P-TiO2 Composite Coatings from Alkaline Hypophosphite Gluconate Baths and their Properties
... 3]. Ni–P coatings can be fabricated by various techniques including electro- plating [4] and electroless deposition [5, ...by coating them with metallic composite containing particles ...
13
Computation and optimisation of electroless Ni Cu P coating using evolutionary algorithms
... Electroless Ni-Cu-P coating was staked on a large concentration of pure Copper ...namely Ni-ion concentration, Cu-ion concentration and reducing agent concentration of the chemical ...
11
Electroless Ni-P/PTFE Self-Lubricating Composite Thin Films Applied for Medium-carbon Steel Substrate
... of Ni-P coating and Ni-P/PTFE composite ...these electroless coatings is mainly ...in electroless Ni-P matrix has not influenced the structure of the ...
19
Ni-P-TiO2 Composite Coatings on Copper Produced by Sol-Enhanced Electroplating
... the electroless plating process, electroplating process shows a broader application prospect for it is easy to operate and the deposition rate can be controlled by adjusting the voltage or current ...
10
Effect of Surfactant on the Electroless Ni-P/Ni-B Duplex Coatings on Aluminium 7075
... resistance, electroless nickel phosphorous is considered as one of the most efficient surface treatment methodology due to its effective comprehensive properties such as good corrosion and wear resistance, uniform ...
8
Preparation and Characterization of Nano-Composite Electroless Ni/Ag Coating as Solar Absorber Panels
... of Ni-P/Ag coatings including various silver nanoparticles ...peak Ni (111), this indicates the presence an amorphous phaseand due to low silver content added the peak of silver not be able to ...
7
Preparation and Properties of an Electroless Triple-Layered Ni- P Based-TiO2/ZrO2 Composite Coating
... the electroless plating method has got better mechanical and anticorrosion properties with uniform and well-connected triple-layer ...layered coating is relatively complex, which requires electroless ...
12
Susceptibility to Stress Corrosion Cracking and Electrochemical Behavior of Electroless Ni-P /nano-TiO2 Composite Coatings on 70-30 Brass in Fluoride Solutions
... to electroless nickel (EN) ...particular, electroless Ni-P coating has been utilized extensively for coating alloy components to improve their inherent ...of electroless ...
16
Comparative Corrosion Resistance of Electroless Ni-P/nano-TiO2 and Ni-P/nano-CNT Composite Coatings on 5083 Aluminum Alloy
... the electroless Ni-P coating provides good corrosion protection for the 5083 substrate, it produced localized broken corrosion voids after 72 h immersion ...the Ni-P/TiO ...
14
A THEORETICAL APPROACH TO OPTIMIZE THE BATH PARAMETERS OF ELECTROLESS Ni-Co-P COATING ON THE RESPONSE OF SURFACE ROUGHNESS
... 3.5 Composite study Surface Morphology of the surface of the coating was determined by the SEM analysis. The SEM analysis was done on the SOF software in JEOL-Jsm 7610F machine. XRD analysis was done on the ...
12
Corrosion Resistance of Super-Hydrophobic Coating on AZ31B Mg Alloy
... super-hydrophobic coating was prepared on AZ31B Mg alloy in this paper. Electroless Ni-P coating as the inner layer was deposited on the AZ31 substrate via an electroless ...
11
Improvements in Wear and Corrosion Resistance of RB400 Anchor Rod Steel by Electroless Ni-P Plating
... The electroless plating technique can be applied on different substrates as steel, aluminum alloy, magnesium alloy, copper, ceramics, carbon nanotube (CNT) and hydrophobic polymer ...the electroless plating ...
17
Electroless Deposition and Characterization of High Phosphorus Ni-P-Si3N4 Composite Coatings
... the electroless Ni-P deposit can be explained based on the mechanism of formation of these ...the coating, the higher will be the disorder and the structure becomes ...of Ni-P ...
15
Deposition Process and Properties of Electroless Ni P Al2O3 Composite Coatings on Magnesium Alloy
... various composite coatings were evaluated by using a HXD-1000 micro-hardness tester with a Vicker indenter at a load of 100 g and durable time of 15 ...with Ni-P coating or ...
8
Electroless Deposition of Ni-P/SiO2 Composite Coating
... the microhardness of plain Ni-P coating deposited under the same conditions. Using the Vickers method (Ludvík et al., 2010), the microhardness was measured on microhardness tester LECO AMH43. ...
6
Physical studies on electroless NI YSZ composite coating
... ceramic composite is well known in engineering as it combines nickel (Ni) that is very well known for its high thermal, high electronic conductivity and high corrosion resistance, with yttria-stabilised ...
5
Corrosion Behaviour of Electroless Deposited Ni–P/BN(h) Composite Coating
... the Ni–P and Ni–P/BN(h) composite coatings are shown in Figure ...of Ni–P coatings is quite smooth with average surface roughness of ...of Ni–P/BN(h) ...
10
Optimization of wear behavior of electroless Ni-P-W coating under dry and lubricated conditions using genetic algorithm (GA)
... alloy Ni-P coating is seen to have excellent hardness, wear resistance, corrosion resistance and low coefficient of friction (COF) (Loto, 2016; Agarwala and Agarwala, ...the electroless bath ...
25
Study of Mechanical Behaviour of Nickel during Machining - A Review
... studied Ni–P–Al2O3 composite coating developed by electroless process by varying the content of nickel sulphate, sodium hypophosphite and investigated the effect of alumina content on ...
5
Preparation of Protective Ni-Al Coating on Low Carbon Steel by Pulsed Composite Electrodeposition
... Surface coating is a commonly used method for improving the corrosion/oxidation resistance in various aggressive environments of the low carbon steels without altering the bulk ...
11