finite element field modelling
Non-invasive Measurement of Cholesterol in Human Blood by Impedance Technique: an Investigation by Finite Element Field Modelling
... issue, finite-dimensional approximation must be ...approximations: finite difference or finite element ...of finite difference method is replacement of the differential equations (DE), ...
203
Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 3D finite element field modelling
... by finite element method (FEM) [12] in terms of electric potential φ for given conductivity (σ) and permittivity (ε) distribution in the problem ...(1), field intensity and flux density vectors ...
7
Non-invasive measurement of cholesterol in human blood by impedance technique: an investigation by 2D finite element field modelling
... for modelling and investigation of the feasibility of such a technique for particle detection by 2D finite element (FE) field ...on modelling and computation of electric field ...
9
Simplified finite-element modelling for tunnelling-induced settlements
... clay. Field exploration and laboratory tests from the MRT Blue Line project show that the subsoils, down to a maximum drilling depth of approximately 60–65 m, can be roughly divided into (1) made ground at 0–1 m, ...
20
The Influence of Passive Confining Effects on the Response of Steel-Concrete Composite Structures
... nonlinear finite element modelling is used to examine the influence of passive lateral stresses attributed to differential expansions of the concrete core and steel faceplates comprising SC composite ...
10
Finite Element Modelling and Simulation of Composite Magnetic Materials Using ANSYS
... Materials which retain their magnetism and are difficult to demagnetize are called hard magnetic materials. These materials retain their magnetism even after the removal of applied magnetic field. They are used ...
6
Geometry Discretization Optimization For Field Modelling Of Inset PMSM
... Based on future work in reference [1], reluctance mesh on the air gap can be modified to accommodate the heavily saturated iron. More subtle reluctance to provide greater net of flux path can be found to model this ...
24
Modelling and Finite Element Analysis of Aircraft Vertical Stabilizer
... The rudder is the aerodynamic control surface of the vertical tailplane. The most important parameters that characterize the aerodynamics of directional control (neglecting propeller and flap effects) in cruise ...
6
Finite element modelling of photonic crystal fibres
... Rahman, 8.M.A., Kabir, A.K.M.S., Ahmed, M.I., Rajarajan, M., and Grattan, K.T.V., "Rigorous modal solutions of photonic crystal fibers by using the full-vectorial H-field finite element [r] ...
248
Finite Element Modelling of Biotransistors
... electric field becomes very ...electric field due to hybridization will not result in any sig- nificant change in the underlying local surface potential, and the BioFET is desensitized along this ...
7
A finite element approach to modelling fractal ultrasonic transducers
... electric field, and was essentially a local de- scription of the dynamics of each edge that when joined to the other edges to form the lattice, led to the global dynamics of the ...electric field operates ...
20
On mathematical modelling of aeroelastic problems with finite element method
... nite element method was applied on the same aeroelas- tic problem and the similar results in terms of frequency and damping was obtained for the sub-critical far field ve- locities in the range 5 - 35 m/s, ...
8
An Optimal Robin-Type Domain Decomposition Method for Raviart-Thomas Vector Field in Three Dimensions
... 38. Toselli A (1999) Domain decomposition methods for vector field problems, Ph.D. thesis, Courant Institute of Mathematical Sciences, Technical Report 785, Department of Computer Science, Courant Institute of ...
11
In plane torsional stiffness in a macro panel element for practical finite element modelling
... macro-panel element represents a substructure with internal meshing of shell elements at an arbitrary degree of ...panel element is used here, but the method does not limit the shape to be rectangular and ...
24
Finite Element Modelling of Steel Beams with Web Openings
... presented finite element models using the ANSYS software [25] to investigate the structural response of steel beams with web openings in terms of stress distributions, collapse load magnitude and associated ...
29
Finite Element Modelling of High Pressure Torsion: An Overview
... It is readily seen in Fig. 2 that HPT facilities with constrained configurations are constructed by placing a tube with thick walls around the work-piece. This element prevents the lateral flow of the sample which ...
12
A Finite Element Approach to Modelling Fractal Ultrasonic Transducers
... are contained within this structure are expressed in terms of a finite ele- ment basis. The propagation of an ultrasonic wave in this transducer is then analyzed and used to derive expressions for the ...
60
Analysis of Human Spine Image Using Finite Element Modelling
... ABSTRACT: A biomechanical model has been developed for optimising the lifting posture for minimum effort and presented in this paper. The model has been validated with practical data available from literature. The model ...
8
Online Full Text
... There has been a little bit research done in the literature concerned with macroscopic traffic flow modelling using the Galerkin finite element method (FEM). In [1], [2], and [3] a Galerkin FEM type ...
7
Literature Review on Modelling and Finite Element Analysis of Delamination of Composite.
... shell element approach the calculation formula for the 2D and 3D problems the modified VCCT with geometrically non-linear FEA and the de-lamination growth behaviour for dissimilar ...
9