• No results found

Flexure and Split Tensile Strength

A Study on Properties of Self Compacting Concrete with Slag as Coarse Aggregate

A Study on Properties of Self Compacting Concrete with Slag as Coarse Aggregate

... compressive strength increased in all ages ...normal strength concrete increases workability, compressive, flexure and split tensile strength increased with increase in ...

12

An Experimental Study on Smart Transparent Concrete

An Experimental Study on Smart Transparent Concrete

... Compressive Strength Test, Water Absorption , Split tensile strength Flexure Strength accelerated corrosion test was carried ...

10

A Study on Mechanical Properties of Geopolymer Concrete

A Study on Mechanical Properties of Geopolymer Concrete

... hydroxide solution i.e, 16M,18M,20M are taken to prepare different mixes. The geopolymer concrete is designed for a grade of M30 in this study. The geopolymer concrete specimens are subjected to sunlight curing and ...

5

PERFORMANCE OF ALKALI ACTIVATED SLAG WITH VARIOUS ALKALI ACTIVATORS

PERFORMANCE OF ALKALI ACTIVATED SLAG WITH VARIOUS ALKALI ACTIVATORS

... compressive strength was measured in 1,7,28 days, split tensile strength was measured in 7,28 days and flexure, punching shear strength was compared in 12 days ...compressive, ...

9

A Felicity of Glass Powder when Replaced with Cement

A Felicity of Glass Powder when Replaced with Cement

... compressive strength, flexure strength & split tensile strength is gradually increasing to some extent with the increase in replacement percentage of glass powder till 15% ...

5

A Study of Strength and Cost Analysis in Concrete Using Copper Slag

A Study of Strength and Cost Analysis in Concrete Using Copper Slag

...  Replacement of copper slag increases the self weight of concrete specimens to the maximum of 15 to 20%.  For higher replacement of copper slag in cement (greater than 20%) the compressive strength decreases.  ...

12

Effect of Granite Powder and Polypropylene Fiber on Compressive, Split Tensile and Flexure Strength of Concrete at High Temperature

Effect of Granite Powder and Polypropylene Fiber on Compressive, Split Tensile and Flexure Strength of Concrete at High Temperature

... Indian granite stone industry out of which 12.2 million tonnes are rejected at the site and 5.2 million tonnes is present in the form of cuttings/ trimmings or undersize materials and there is 0.4 million tonnes of ...

5

Study on the performance and durability of hemp concrete

Study on the performance and durability of hemp concrete

... Compressive Strength for Concrete and S plit Tensile Strength for Concrete and Flexural Strength for Concrete have been ...compressive Strength value at 28 days 12.8%, and the ...

7

Experimental Investigation on Metakaolin Modified Fiber Reinforced Concrete

Experimental Investigation on Metakaolin Modified Fiber Reinforced Concrete

... various strength factors are ...compressive strength, Cylinders of 150 mm dia. X 300 mm length for split tensile strength, Beam of 150 X 150 X 700 mm for flexure ...

6

Comparative Study of Porous and Non-Porous Rigid Pavement Jaimin J Solanki, Prof. Vrundani Vaidya

Comparative Study of Porous and Non-Porous Rigid Pavement Jaimin J Solanki, Prof. Vrundani Vaidya

... compressive strength, Flexure strength, Split Tensile test and Infiltration rate Test From the analysis of the data, type of the soil which is suitable for the porous pavement is ...

5

INVESTIGATION AND COMPARSION OF STRENGTH OF CONCRETE BASED ON GGBS AND FLY ASH AGAINST ACID ATTACK

INVESTIGATION AND COMPARSION OF STRENGTH OF CONCRETE BASED ON GGBS AND FLY ASH AGAINST ACID ATTACK

... Ground Granulated Blast Furnace Slag is the material which is using widely as replacement of Ordinary Portland Cement. Ground Granulated Blast Furnace Slag is mainly formed with the compounds called calcium oxide, ...

11

Effect of Replacement of River Sand with Artificial Sand on Properties on Cement Mortar

Effect of Replacement of River Sand with Artificial Sand on Properties on Cement Mortar

... Standard cube specimens were cast using the procedure described in IS: 516–1959 and were kept there for 24 hours and then released in water tank for 28 days of curing. After 28 days curing period, the concrete cube ...

8

Study on Strength Properties of Ferrochrome Slag Aggregate as Partially Replacement of Coarse Aggregate

Study on Strength Properties of Ferrochrome Slag Aggregate as Partially Replacement of Coarse Aggregate

... ABSTRACT: Concrete is the commonly used construction material due to its structural stability, durability and strength. The demand on concrete is increasing day by day due to growing population, urbanization, ...

6

EFFECT OF DIFFERENT TYPES OF STEEL FIBER ON THE SPLIT TENSILE STRENGTH OF SFRC CYLINDRICAL SPECIMENS

EFFECT OF DIFFERENT TYPES OF STEEL FIBER ON THE SPLIT TENSILE STRENGTH OF SFRC CYLINDRICAL SPECIMENS

... reinforced concrete (SFRC) was investigated. Different types of steel fiber i.e. hooked end fiber of aspect ratio 60 and 75 and crimped rounded steel fiber of aspect ratio 75 were used. These fibers were added in the ...

6

An Experimental Study on the Use of Magnetized Water in Concrete with M Sand as Fine Aggregate

An Experimental Study on the Use of Magnetized Water in Concrete with M Sand as Fine Aggregate

... Abstract: Water plays an important role in the concrete preparation. It plays an important role in workability and strength of concrete. A new technology known as magnetized water is used to increase the ...

7

An Experimental Study on Mechanical Properties of E Plastic Waste Concrete

An Experimental Study on Mechanical Properties of E Plastic Waste Concrete

... compressive strength of concrete with the presence of ...compressive strength gets reduced by ...compressive strength gets increased up to a maximum of ...

6

Impact of Polypropylene Fiber and Steel Fiber on Mechanical Properties of Concrete

Impact of Polypropylene Fiber and Steel Fiber on Mechanical Properties of Concrete

... compressive strength is maximum for the proportion of ...and tensile strength, flexural strength also increase for the proportion ...Compression strength, Tensile ...

8

Experimental Studies on Concrete Containing Welding Waste Slag

Experimental Studies on Concrete Containing Welding Waste Slag

... the largest utiliser of natural sources and industrial materials by products available in the world. The concrete is a essential material to fulfill the requirements of industries, domestic housing and basic ...

7

Study on Strength of Concrete (M 30 Grade) by Partial Replacement of Cement with Appropriate % of Ground Granulated Blast Furnace Slag (GGBS), Calcium Carbide Residue (CCR) and Fly Ash(FA)

Study on Strength of Concrete (M 30 Grade) by Partial Replacement of Cement with Appropriate % of Ground Granulated Blast Furnace Slag (GGBS), Calcium Carbide Residue (CCR) and Fly Ash(FA)

... 4.6.1 After taking the observations with different replacing material and different replacement levels, some values of the strength were observed that was quite similar (satisfactory results) to the ...

6

Experimental Study on Strength of Concrete with Addition of Chopped Glass Fiber

Experimental Study on Strength of Concrete with Addition of Chopped Glass Fiber

... compressive strength, split tensile strength and tensile strength (flexural strength) properties of the ...compressive strength, split tensile ...

6

Show all 10000 documents...

Related subjects