• No results found

liquid metal

A Study of Eutectic Gallium Indium Liquid Metal in Microsystems and Interfaces.

A Study of Eutectic Gallium Indium Liquid Metal in Microsystems and Interfaces.

... the liquid metal should appear metallic through the optically transparent PDMS, but instead it appears colorful (Figure ...the metal [1,2] , (2) thin film interference, or (3) corrugations resulting ...

164

Experimental Study on MHD Effect of Liquid Metal Sheath Jet for the Liquid Metal Divertor REVOLVER-D

Experimental Study on MHD Effect of Liquid Metal Sheath Jet for the Liquid Metal Divertor REVOLVER-D

... a liquid metal ...a liquid metal jet ...the liquid metal sheath jet and the behavior of the liquid metal sheath jet including the influence of MHD effect must be ...

5

Highly Tunable Liquid Metal Wire Antennas.

Highly Tunable Liquid Metal Wire Antennas.

... wires presented in this work provide the serve as the conductive structures utilized in the wire antennas presented in this thesis, therefore considerable detail will be paid to the fabrication process, mechanical ...

139

Plasmonic Effects in Noble Metal-liquid Metal Based Nanoparticles

Plasmonic Effects in Noble Metal-liquid Metal Based Nanoparticles

... of metal nanoparticles can be studied by use of Mie Theory and Gans Theory which are based on solutions of Maxwell Equation for light interaction with ...of liquid metal nanoparticles in plasmonics ...

7

Transformable Liquid-metal Nanomedicine.

Transformable Liquid-metal Nanomedicine.

... transformable liquid-metal nanomedicine, based on a core–shell nanosphere composed of a liquid-phase eutectic gallium-indium core and a thiolated polymeric ...This liquid metal-based ...

236

Analysis of liquid metal foams through X ray radioscopy and microgravity experiments

Analysis of liquid metal foams through X ray radioscopy and microgravity experiments

... the liquid prole F(z, t) evolves with time from a given starting ...measured liquid proles, coupled with numerical solutions, to determine the key parameters of the liquid metal ...

8

Microfluidic mass production of stabilized and stealthy liquid metal nanoparticles

Microfluidic mass production of stabilized and stealthy liquid metal nanoparticles

... bPEG has some advantages over linear PEG as macromolecular structural features can be easily controlled using the versatility of living radical polymerization. [14] bPEG can also yield high grafting densities and can ...

22

Engineering the Yield Properties of the Oxide Skin on a Liquid Metal Alloy.

Engineering the Yield Properties of the Oxide Skin on a Liquid Metal Alloy.

... on liquid metal and characterize its stability so that it can be tuned on a per application ...the metal is important for defining the stability of the metal in ...the metal decreases ...

108

Rapid electrocapillary deformation of liquid metal with reversible shape retention

Rapid electrocapillary deformation of liquid metal with reversible shape retention

... dramatic liquid-metal deformations require only a very small increase in surface ...the liquid metal can be elongated as a function of the required change in normalized surface ...the ...

9

Shape-Transformable Gallium-based Liquid Metal Particles for Soft Electronics.

Shape-Transformable Gallium-based Liquid Metal Particles for Soft Electronics.

... the liquid metal to form rods within 10 min of sonication (or transformed into rods from liquid metal particles by thermal ...on liquid metal but does not appear to react ...

169

Electrically Controlled Liquid Metal Antennas and Periodic Structures.

Electrically Controlled Liquid Metal Antennas and Periodic Structures.

... restrictions. Liquid metal (LM), particularly non-toxic alloy of gallium and indium, is a promising conductor capable of delivering a larger number of tunable states than conventional reconfigurable ...

171

Electrohydrodynamic Phenomena on a Liquid Metal.

Electrohydrodynamic Phenomena on a Liquid Metal.

... Further questions remain regarding the oxide layer, particularly its composition and thickness in solution and under anodic potential. While we have provided a crude estimate of the oxide thickness in Chapter 3, based on ...

131

Liquid metal extraction of Nd from NdFeB magnet scrap

Liquid metal extraction of Nd from NdFeB magnet scrap

... This research involves using molten magnesium (Mg) to remove neodymium (Nd) from NdFeB magnet scrap by diffusion. Mg was melted over pieces of NdFeB scrap and held at temperatures in the range 675–705 °C for 2–8 h. The ...

11

Metal Metal Joining by Unusual Wetting on Surface Fine Crevice Structure Formed by Laser Treatment

Metal Metal Joining by Unusual Wetting on Surface Fine Crevice Structure Formed by Laser Treatment

... investigated metal ­ metal joining using “ unusual wetting ” , in which a liquid metal spreads by capillary action on a porous metal surface layer formed under atmospheric ...by ...

5

Emission of Visible Light by Hot Dense Metals

Emission of Visible Light by Hot Dense Metals

... Accelerator-heated WDM experiments on an experi- mental facility in the Lawrence Berkeley National Labo- ratory rapidly heat a submicron-thick foil to several thou- sand K. The foil appears to break into small droplets ...

5

Controlling the Shape and Interfacial Properties of Eutectic Gallium Indium.

Controlling the Shape and Interfacial Properties of Eutectic Gallium Indium.

... unstable at conditions in which the oxide layer is removed (e.g., by reduction via electric bias). Without the oxide skin, the liquid metal is a high surface tension liquid that will change its shape ...

167

Seismic   Response of Lead-and Lead-Bismuth-Cooler-Reactor Vessels

Seismic Response of Lead-and Lead-Bismuth-Cooler-Reactor Vessels

... The seismic analysis for the vessel of a heavy-liquid-metal reactor was undertaken based on the Design Response Spectrum approach. The variation of the normal-mode [r] ...

8

Transitory Embrittlement of Polycrystalline Silver by Liquid Gallium

Transitory Embrittlement of Polycrystalline Silver by Liquid Gallium

... by liquid gallium (Ga) is known as liquid metal embrittlement ...solid metal in contact with liquid Ga on the ...with liquid Ga were placed in a furnace at 308 ­ 573 K for ...

5

Life Cycle and Energy Assessment of Automotive

Life Cycle and Energy Assessment of Automotive

... reported average energy consumption of 6.5±3 GJ per tonne of liquid metal (Figure 16). With regards 369[r] ...

23

Manufacturing and Design Analysis on CAD CAM Software for Single Cavity PDC Die

Manufacturing and Design Analysis on CAD CAM Software for Single Cavity PDC Die

... the liquid metal is injected into the cavity under external pressure and this pressure is maintained until the liquid metal cools and then the solid casting is ejected out of the ...

9

Show all 10000 documents...

Related subjects