Magnesium alloy sheet
Butt Joining of Magnesium Alloy Sheet by Shot Peening
... Magnesium and its alloys are very attractive for light weight applications. However, their use is complicated by the fact that dissimilar metals are joined by fusion welding. In the present study, the ability of ...
5
Cold Deep drawing of AZ31 Magnesium Alloy Sheet under Controlled Forming Motion Using Servo Press Machine
... AZ31 magnesium alloy sheet with a commonly used metal mold by three kinds of drawing motions (crank, vibration, and step-by-step motion) was performed, and the effect of drawing motions on the ...
6
Finite element simulation of warm deep drawing process in forming circular cup from magnesium alloy sheet
... of magnesium alloy in sheet metal forming has been of interest to many ...of magnesium alloy at room temperature, warm forming has been developed in order to produce parts of a ...
8
Elastic and Damping Properties of AZ31 Magnesium Alloy Sheet Processed by High Temperature Rolling
... Elastic and damping properties of AZ31 magnesium alloy sheet processed by high-temperature rolling were investigated. The specimen rolled at high temperature (798 K) exhibited the significant low ...
5
Stress Analysis of Friction Stir Spot Welded Magnesium Alloy Sheet under Tensile Shear Load
... Campanelli L.C. et al. has studied on microstructural features and mechanical performance under shear loading along the cross-section of AZ31 magnesium alloy friction spot welded joints made using different ...
12
Finite element simulation of magnesium alloy sheet forming at elevated temperatures
... Mg alloy sheet available from tensile test was limited to low strain rates, strains and temperature up to 200 ◦ ...in magnesium sheets the basal poles are oriented normal to the thickness direction ...
9
Experimentally and Numerical Study on Deep Drawing Process for Magnesium Alloy Sheet at Elevated Temperatures
... processing magnesium alloys, especially forming process, at elevated ...with magnesium alloy sheets show that the drawability of sheets can be improved by local heating based on the change of ...
6
Effect of Texture of AZ31 Magnesium Alloy Sheet on Mechanical Properties and Formability at High Strain Rate
... combining bending, stretching and drawing, since it is ductile until appreciably low temperatures compared with the rolled strip B. If the drawing limit is predominated by local (thickness) necking, increasing the ...
5
Springback Characteristics of Magnesium Alloy Sheet AZ31B in Draw Bending
... Mg alloy sheets have poor formability at room temperature (RT ) mainly owing to the limited number of slip systems in hexagonal close-packed (hereafter HCP) Mg ...
9
Superplastic Forming of AZ31 Magnesium Alloy Sheet into a Rectangular Pan
... performed using the same Mg-alloy sheet “AZ31” and was conducted at the SP temperature 673 K. The figure shows that the estimated bulge time with material characteristics ob- tained at SP temperature 673 K ...
6
Continuous Casting of Magnesium Alloy Sheet Using Semisolid Slurry
... semisolid magnesium slurry must be prevented from burning or ...the sheet casting, the distances between them were set to 120, 130 and 135 ...the sheet thickness (3 mm) and roll speed ...
5
Finite element simulation of magnesium alloy sheet forming at elevated temperatures
... (1995) later developed a new test to incorporate larger surface enlargement. This method is based on a principle of backward can extrusion and subsequent rotation of the punch with re[r] ...
5
Controlling Roll Temperature by Fluid-Solid Coupled Heat Transfer
... the magnesium alloy sheet and roll) has been built, and the regulation strategy of roll temperature is given, meaning the roll temperature can be controlled within a reasonable range at any ...
14
Thermaal Invistigation of Single Cylinder 4-Strock Engine With Different Fin Profile Using Various Alluminium Alloys
... The main aim of the present paper is to analyze the thermal properties by varying geometry, material and thickness of cylinder fins using ANSYS. Transient thermal analysis determines temperatures and other thermal ...
9
Weight Optimization of Alloy Wheel
... For this analysis the Magnesium AZ91 alloy is taken as the wheel material. The 3D1 model is prepared by keeping the same number of spokes and varying the thickness of rim and changing the cross section area ...
7
Reduction in the Corrosion Rate of Magnesium and Magnesium Alloy Specimens and Implications for Plain Fully Bioresorbable Coronary Artery Stents: A Review
... their use to fabricate a variety of metallic biomedical devices, such as patient-matched templates for thoracic pedicle screw placement [103], a mandibular prosthesis [104], and a tracheal stent [105]. However, to date, ...
27
Proposal for a COUNCIL REGULATION (EEC) increasing the Community tariff quota opened for 1977 by Regulation (EEC) No 2930/76 for unwrought magnesium falling within subheading 77 01 of the Common Customs Tariff COM (77) 239 final, 15 June 1977
... weight of pure magnesium unwrought magnesium in alloy; Whereas as far as the distribution of the above quota volwnes between Member States is concerned, it is necessary to allot to the C[r] ...
12
As-cast Microstructures and Mechanical Properties of Mg-5Y-2Nd-xSm-0.5Zr (x= 0, 1, 3, 5) Magnesium Alloys
... ordinary magnesium alloys greatly limits the development and application of magnesium alloys ...heat-resistant magnesium alloys with better performance has become an important research direction in ...
6
The Effects of Magnesium Particles in Mg-rich Primers Applied on AZ91D Magnesium Alloy
... A PARSTAT 2273 workstation (Princeton applied research CO. Ltd, USA) was used in electrochemical impedance spectroscopy (EIS) measurements, over the frequency range from 100 kHz to 0.01 Hz (30 points measured, 4 steps ...
19
Chip Fragmentation in the Milling of AZ91HP Magnesium Alloy
... AM50 alloy and 525 °C for AZ91D alloy for ...popular magnesium alloys: WE43, AZ31 and AZ91, is 644 °C for WE43, 628 °C for AZ31 and 600 °C for AZ91, ...WE43 alloy was not observed until 750 ...
15