Measurements and Characterization
Sensor characterization by comparative measurements using a multi-sensor measuring system
... favoured characterization of the transfer behaviour is given by the ITF, which describes the ratio of the measured and the true amplitude of a surface structure with respect to the spatial ...various ...
11
An Improved Characterization of Small Scale Fading Based on 2D Measurements and Modeling of a Moving Receiver in an Indoor Environment
... 2D measurements while the receiver is in motion in both x and y directions, in which an improved characterization of the small-scale fading 2D was ...conducted measurements based on three scenarios, ...
15
ACOUSTIC HARMONIC GENERATION MEASUREMENTS FOR MATERIALS CHARACTERIZATION
... ACOUSTIC HARMONIC GENERA nON MEASUREMENTS Harmonic generation measurements are typically performed in a throughtransmission type of experiment and involve injecting a monochromatic toneb[r] ...
7
Aerosol composition and hygroscopicity studies : instrument development/characterization, ambient and laboratory measurements, and modeling
... actual measurements suggests that the thin layer above cloud sampled by the aircraft possibly contained droplet residual particles from evaporated cloudtops during the ...reported measurements directly ...
546
NON-DESTRUCTIVE PHYSICAL MEASUREMENTS FOR THE STUDY OF MUSEUM ENVIRONMENTS AND CHARACTERIZATION OF ARCHAEOLOGICAL ARTIFACTS
... The apparatus used for the characterization of the elemental chemical composition of the surface portions constituents the artefacts is an XRF spectrometer (Bruker AXS, mod. ARTAX 400). The detector consists of a ...
5
Retrievals from GOMOS stellar occultation measurements using characterization of modeling errors
... aerosol optical depth are retrieved from the UV-VIS spec- trometer measurements. Since aerosol extinction spectrum is not known a priori, a second-degree polynomial model is used for the description of the aerosol ...
9
Light Reflection by Cuticles of Chrysina Jewel Scarabs: Optical Measurements, Morphology Characterization, and Theoretical Modeling
... As seen from the previous section, the key aspects to apply Berreman’s framework are the knowledge of the optical constants and birefringence of the materials, as well as the pitches of the structures which in this case ...
19
Polarization measurements through a standard single mode fiber for imaging and remote characterization
... experience changes when manipulating the fiber. Thus, the overall birefringence of the fiber is likely to be time dependent in actual operating conditions, inducing uncontrolled variations of the polarization state at ...
6
From standard wind measurements to spectral characterization: turbulence length scale and distribution
... so at higher z one would expect the general form (13) to be yet more accurate than its approximate form (15); however, this is not likely for wind turbine rotor heights, except in very stable conditions (Kelly et al., ...
11
MIPAS-STR measurements in the Arctic UTLS in winter/spring 2010: instrument characterization, retrieval and validation
... Following this approach, in the first step an initial mean instrumental phase is determined from the blackbody mea- surements of the corresponding flight section according to Forman et al. (1966). The resulting ...
24
Impedance spectroscopy characterization of an interdigital structure for continuous particle measurements in wood-driven heating systems
... of measurements were performed with IDE structures loaded in different SHS (Buderus Blueline stove, Buderus Logano S231-25 wood gasifier) and with different kinds of wood-based ...min measurements with ...
8
Original Article Characterization of the pathologic and endoscopic measurements of colorectal polyp sizes with a focus on sessile serrated adenoma and high-grade dysplasia
... There are several other possible reasons for the PMS and EMS differences. First, the optical distortion caused by distance and visual angle would affect the endoscopic and microscopic measurements. Second, the ...
9
Ensemble smoothing of land subsidence measurements for reservoir geomechanical characterization
... which measurements of surface displacement are ...the measurements data are log-transformed before use in the ES update ...perturbed measurements that maintains the same sign as the measurement ...
49
Performance Characterization of a Single Abrasive Grit with Force Measurements and Visualization Techniques.
... workpiece material for each workpiece revolution. Since the DTM spindle theta position was recorded simultaneously as the cutting forces, the first groove on a Talysurf profile corresponded to the forces for the same ...
169
Article: Morphometric characterization of Brahman crossbred cattle and prediction of live weight using linear body measurements
... Table 1 shows overall body weights and morphometric measurements of Brahman crossbred cattle. Age had significant influence (P<0.001) on all morphometric measurements. Body weight was linearly increased ...
9
Electrical Characterization of Traps in AlGaN/GaN FAT HEMT’s on Silicon Substrate by C V and DLTS Measurements
... (C-V) measurements, from which we can extract the barrier height and the donor concentration in the AlGaN ...heterostructure. Measurements reveal the presence of one electron trap with the activation energy ...
6
Characterization of Reinforced Carbon Composites with Full Field Measurements: Long Gauge Length Compressive Apparatus
... Composite structures undergo complex deformations depending on the laminate design, part geometry and the loading itself. Such structures are subjected to in-plane tension, shear, compression and out of plane stresses. ...
9
Arctic Sea Ice Characterization using Spaceborne Fully Polarimetric L-, C- and X-Band SAR with Validation by Airborne Measurements
... ice analysis. Here, we employ an automatic sea ice classification algorithm on two sets of spatially and temporally near coincident fully polarimetric acquisitions from the ALOS-2, Radarsat-2, and TerraSAR-X/TanDEM-X ...
20
Characterization of aerosol photooxidation flow reactors: heterogeneous oxidation, secondary organic aerosol formation and cloud condensation nuclei activity measurements
... with measurements is needed for reliable ap- plication. The characterization of different reactor designs is important to establish the reliability of the experimental ...
17
Characterization of spatial heterogeneity of groundwater stream water interactions using multiple depth streambed temperature measurements at the reach scale
... at characterization of groundwater surface water interaction can benefit from using multiple methods and ...perature measurements to be a useful tool to gain insight into the spatial heterogeneity of fluxes ...
11