• No results found

Phased Array Ultrasonic Testing (PAUT)

3-D calibration method and algorithm for freehand image of phased array ultrasonic testing

3-D calibration method and algorithm for freehand image of phased array ultrasonic testing

... Abstract. Phased array ultrasonic testing (UT) is an advanced technique applying ultrasound wave vibration theory to detect the flaw in tested materials by ...the ultrasonic ...

10

Experimental Validation of a Phased Array Ultrasonic Testing Probe Model and Sound Field Optimization

Experimental Validation of a Phased Array Ultrasonic Testing Probe Model and Sound Field Optimization

... many ultrasonic measurements in a rapid and simple way, for example a rapid sectorial scan in a region using a single PA probe and real-time imaging based on acquired ...the array without focusing effect; ...

42

Evaluation Of Flange Face Corrosion Using Phased Array Ultrasonic Testing (Paut) In Process Industry

Evaluation Of Flange Face Corrosion Using Phased Array Ultrasonic Testing (Paut) In Process Industry

... 10" Mock-Up Flange Defect locations & length marked on the external cover of pipe correspond to actual depends when flanges were dismantled. In-service flange-1 No significant deterioration noted during physical ...

8

Modelling of Phased Array Ultrasonic Inspection of a Steam Generator Dissimilar Metal Weld

Modelling of Phased Array Ultrasonic Inspection of a Steam Generator Dissimilar Metal Weld

... Abstract Phased array ultrasonic techniques (PAUT) are more and more used for inspection of the primary circuit of nuclear power plants in order to detect defects such as stress corrosion cracking ...

8

Phased array ultrasonic evaluation of ultra high strength steel weldments for aerospace applications

Phased array ultrasonic evaluation of ultra high strength steel weldments for aerospace applications

... Phased Array Ultrasonic Testing Phased arrays have been put into practical use for some time ...and phased arrays are no ...the phased array technology to expedite ...

6

Phased Array Testing Procedure

Phased Array Testing Procedure

... interactions with the bolt hole and backwall. For the beam profile, both “I” and “T” geometries and subsequent extrusions were performed in order to compare beam profiles for both solid models. For the CAD modeling in ...

19

Post Signal Processing of Ultrasonic Phased Array Inspection Data for Non-destructive Testing

Post Signal Processing of Ultrasonic Phased Array Inspection Data for Non-destructive Testing

... In ultrasonic phased array non-destructive testing, the amplitude of the grain noise can be smaller than that of the echoes, and the grain noise can totally mask echoes characterizing ...

6

The development and implementation of advanced ultrasonic phased array technology

The development and implementation of advanced ultrasonic phased array technology

... Defects 5 and 12 (see Fig 6-3c, h) are outer surface breaking defects and occur along the upper fusion face. The near side inspection of both defects is equivalent to defect 5 in the flat plate non-welded test-piece. The ...

255

FPGA-Based Control System of an Ultrasonic Phased Array

FPGA-Based Control System of an Ultrasonic Phased Array

... The ultrasonic waves are mechanical vibrations that can propagate through many different types of ...in ultrasonic non-destructive testing (UNDT), an ultrasonic signal is transmitted into the ...

7

Ultrasonic phased array system modeling-issues and solutions

Ultrasonic phased array system modeling-issues and solutions

... immersion testing, but only for arrays with elements whose dimensions are less than a ...contact testing are typically negligible for both large and small ...

10

Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)

Non-destructive testing of welds - Ultrasonic testing - Use of automated phased array technology (ISO 13588:2019)

... Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology 1 Scope This document specifies the application of the phased array ...

16

Ultrasonic Phased Array Inspection Simulations of Welded Components at NASA

Ultrasonic Phased Array Inspection Simulations of Welded Components at NASA

... As NASA’s Constellation Program proceeds to develop new crew and launch vehicles, many inspection and nondestructive evaluation challenges will be encountered. Ultrasonic testing will play a role in the ...

18

Inspection of Historic Steel Bridges Using Ultrasonic Phased Array

Inspection of Historic Steel Bridges Using Ultrasonic Phased Array

... The UPA system was developed by designing and fabricating a PMMA case to house the designated probe. The material sound velocity was found by testing the TOF of sound from one side transducer to the other. This ...

134

Application of the factorisation method to limited aperture ultrasonic phased array data

Application of the factorisation method to limited aperture ultrasonic phased array data

... An alternative approach to analysing the FMC could be to operate in the frequency domain. Assuming that the lo- cation of the flaw is known a priori, a discrete Fourier transform can be taken over the relevant time ...

13

Application of the factorisation method to limited aperture ultrasonic phased array data

Application of the factorisation method to limited aperture ultrasonic phased array data

... nondestructive testing uses high frequency me- chanical waves to inspect components of safety criti- cal structures, ensuring that they operate reliably without compromising their ...non-destructive testing ...

14

Ultrasonic Phased Array for the Circumferential Welds Safety Inspection of Urea Reactor

Ultrasonic Phased Array for the Circumferential Welds Safety Inspection of Urea Reactor

... © 2012 Published by Elsevier Ltd. Selection and/or peer-review under responsibility of the Capital University of Economics and Business, China Academy of Safety Science and Technology. Keywords: Urea reactor, ...

5

Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots

Ultrasonic phased array testing in the power generation industry : novel wedge development for the inspection of steam turbine blades roots

... 14 Thesis – Ultrasonic phased array testing in the power generation industry – Novel wedge development November 2011 the blades. The root areas of the blades are subjected to the highest ...

317

Automated Detection of Cracked Railway Axle Journals Using an Ultrasonic Phased Array Technique

Automated Detection of Cracked Railway Axle Journals Using an Ultrasonic Phased Array Technique

... Other non-contact ultrasonic single-side inspection methods were developed by Delrue et al. (2010) on aluminum samples with artificial defects. The methods included 1) a ray tracing (shadow) approach and 2) a ...

184

Ultrasonic Scattered Field Distribution of One and Two Cylindrical Solids with Phased Array Technique

Ultrasonic Scattered Field Distribution of One and Two Cylindrical Solids with Phased Array Technique

... Ultrasonic phased array inspection technology can detect complex geometric components using ultrasonic ...a phased array are normally generated with a time delay, which ensures a ...

12

Design of Polyphase Cascaded Integrator Comb Interpolator Filter for Ultrasonic Phased Array Time Delays

Design of Polyphase Cascaded Integrator Comb Interpolator Filter for Ultrasonic Phased Array Time Delays

... gate array. I. I NTRODUCTION Ultrasonic phased array technology is one of important non-destructive testing techniques, the main feature of which is computer-controlled excitation ...

6

Show all 10000 documents...

Related subjects