Polymeric Membrane
Fabrication of an All Solid State (ASS) Polymeric Membrane Sensor (PME) for Tramadol and Its Application
... state polymeric membrane electrode (ASS-PME) for the facile and rapid analysis of tramadol hydrochloride in pharmaceutical formulations, using an ion-pair compound in the sensing ...the polymeric ...
11
Influence of interfering ions as a key parameter on response of a fabricated Tm3+ solvent polymeric membrane ion selective electrode
... liquid polymeric membrane sensor based on N-[(E)-1-(2- thienyl)methylidene]-N-(4-{[(Z)-1-(2-thienyl)methylidene]amino}phenyl)amine (TTPA) has been ...the membrane, b) kind of the plasticizer in the ...
7
Impact of Carbon Nanotubes on the Polymeric Membrane for Oil – Water Separation
... the polymeric membrane and it leads to a poor interfacial compatibility of the SWCNTs with the ...the polymeric membrane ...PSF membrane by introducing the interest of using ...
17
Novel Polymeric Membrane and Coated Wire Electrodes for Determination of Alverine Citrate in Pharmaceutical Formulations and Biological Fluids
... species, polymeric membrane and coated wire ...of polymeric membrane ISEs can be reduced by eliminating the internal reference solution in construction of coated wire electrodes (CWEs) ...
16
Application of Polymeric Membrane in CO2 Capture from Post Combustion
... therefore of more interests to the research and industrial circles. Polymeric membrane separations, which are based mainly on physical phenomena, are easy for operation and to scale up. The details and ...
6
Zinc(II) Selective Electrode based on Polymeric Membrane of 2,6-Diacetylpyridinebis(benzenesulfonylhydrazide) Ligand
... PVC membrane ion-selective sensor was tested for variety of metal ions, including alkali, alkali earth, and transition metal ...of membrane sensors based on ligand L for various metal ions is depicted in ...
11
An All-Solid-State Polymeric Membrane chloride ion-selective Electrode with Nanowires poly(3,4-ethylenedioxythiophene) as Solid Contact
... This paper reports the development of a novel all-solid-state polymeric membrane Cl - -selective electrode, based on nanowires poly(3,4-ethylenedioxythiophene) (PEDOT) as solid contact. The nanowires PEDOT ...
13
Techno-economic evaluation of helium recovery from natural gas; A comparison between inorganic and polymeric membrane technology
... A membrane separation process may offer a more efficient production system with smaller footprint and lower operational cost than the conventional cryogenic ...Matrimid polymeric membrane. An ...
11
All Solid State (ASS) Polymeric Membrane Sensor (PMS) for the Monitoring of Nanomolar Nickel Concentration
... To enhance the possibility to miniaturize ISEs, which in turn provides a range of new possibilities for their applications and improved characteristics, the elimination of the internal reference electrode and filling ...
11
Theoretical Studies on Copper Extraction by means of Polymeric Membrane Contactors
... As shown in Fig. 4, the Extra-Flow module contains a central shell side baffle, a feature which offers two advantages. First, the baffle improves efficiency by minimizing shell side bypassing; second, it provides a ...
6
Solid-contact Polymeric Membrane Electrode for Real-Time Monitoring of Lead Adsorption
... ion-selective membrane is in electrical contact with the inner reference electrode through the inner solution, and these electrodes suffer from various drawbacks such as the inner filling solution drying out, ...
8
POLYMERIC MEMBRANE SENSORS FOR DIRECT DETERMINATION OF TRICYCLIC ANTIDEPRESSANT CLOMIPRAMINE HYDROCHLORIDE IN PHARMACEUTICAL FORMULATIONS AND BIOLOGICAL FLUIDS
... active membrane by dipping the exposed end into the coating solution was (described previously under membrane composition) ten times and allowing the film left on graphite rod to dry in air for 1 min each ...
11
Fabrication of Eu3+ Polymeric Membrane Ion Selective Sensor
... PVC membrane sensor has been constructed by using 1,4-bis[o-(thiophene-2- carboxamidophenyl)]-1,4-dithiobutane (TCD) as a suitable ion ...chloride) membrane matrix exhibited a near-Nernstian response to Eu ...
5
Electrochemical and SPR Characterization of a Polypyrrole-Modified Carbon Paste Electrode Useful for the Potentiostatic Quantification of Surfactants
... polypyrrole membrane doped with sodium dodecyl sulphate on the surface of a carbon paste electrode (CPE/Ppy-SDS) useful for the anionic surfactants’ potentiometric quantification either as monomers or micelles, is ...
16
The Effect of Membrane Material and Surface Pore Size on the Fouling Properties of Submerged Membranes
... between membrane material and the development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and ...fiber membrane ultrafiltration (UF) modules ...
11
Solid-contact Potentiometric Sensor for the Determination of Total Ammonia Nitrogen in Seawater
... In recent years, potentiometry based on polymeric membrane ion-selective electrodes (ISEs) has gone through a renaissance [12,23]. In particular, solid-contact ISEs with their durability, ease of ...
13
Chitosan Based Heterogeneous Membrane Sensor for pH – A Prototype
... on polymeric membranes have attracted more attentions than others ...several polymeric matrices have been used in the manufacturing of ion selective electrodes (ISE) polyvinyl chloride (PVC) remains one of ...
9
Preparation and characterization of low cost mixed matrix membrane for wastewater treatmen
... standards. Membrane technology is one of the major and recent advanced techniques in the treatment ...have polymeric, ceramic or ceramic incorporated polymeric types (Mixed Matrix types) for a better ...
9
Sweetening of Natural Gas Through Hollow Silica Nanoparticles Embedded Hydroxyethyl Cellulose Membrane
... cellulose polymeric solution was slowly added into the vial till the determined weight is obtained, and then stirred well for 6 hrs to ...composite polymeric membrane was slowly peeled off from the ...
7
All Solid Sate Potentiometric Sensors for the Measurement of Paroxetine in Pharmaceutical Formulation
... PVC membrane electrode (PME), as a symmetric potentiometric sensor and all solid state polymeric membrane electrode (ASS-PME) as an asymmetric sensor were made and used for determination of ...
13