Pulsed Laser Deposition (PLD)
Pulsed laser deposition of single crystalline Cu7In3/CuIn0 8Ga0 2Se2 core/shell nanowires
... the pulsed-laser deposition (PLD) is a more proper alternative to prepare multiple ...the pulsed laser will migrate on the substrate surface and make the low temperature of bulk ...
6
Review of Graphene Growth From a Solid Carbon Source by Pulsed Laser Deposition (PLD)
... vapor deposition (CVD), mechanical exfoliation, decomposition of SiC, liquid-phase exfoliation, pulsed laser deposition ...including deposition processes and ...
18
Design and Fabrication of Anti Reflection Coating by Pulsed Laser Deposition
... In this work design and fabricated antireflection coating with single layer is discussed. The fabrication of antireflection coating is achieved using pulsed laser deposition technique (PLD) which ...
12
Modelling of laser ablation and reactive oxygen plasmas for pulsed laser deposition of zinc oxide
... vapour deposition (CVD), molecular beam epitaxy (MBE), magnetron plasma sputtering, and pulsed laser deposition (PLD) have all successfully been applied to fab- ricate ZnO fi lms with ...
8
Pulsed laser deposition of thick multilayer garnet crystal films for waveguide laser devices
... of pulsed laser deposition (PLD) to fabricate thick multilayered garnet crystal planar waveguides with rare-earth ion doped cores for use as planar waveguide laser ...diode laser ...
213
Spectroscopic Study of Titanium Dioxide Thin Films Prepared by Pulsed Laser Deposition
... Many deposition methods have been used to prepare titanium ...[18], Pulsed Laser Deposition (PLD)[17], and chemical methods (such as spin coating sol-gel precursors [15], and Chemical Vapour ...
6
Investigation of the Dependence of Thickness and Roughness of TiO2 Thin Films Fabricated Using Pulsed Laser Deposition on the Laser Energy
... vapor deposition techniques (CVD/PVD), sol-gel methods, photo- deposition, pulsed laser deposition (PLD) and e-beam evaporation [14-16], PLD used in this work represents one of the ...
5
The Influence of the Number of Laser Pulses on the Thickness and Roughness of TiO2 Thin Films Fabricated Using Pulsed Laser Deposition
... by pulsed laser deposition technique (PLD) using a Q- switched Nd: YAG ...of laser pulses (5, 10 and 15 pulses) with the same pulse energy (150 mJ) and same Repetition rate (10 ...of ...
6
A Nanocrystalline Fe2O3 Film Anode Prepared by Pulsed Laser Deposition for Lithium Ion Batteries
... PLD: Pulsed laser deposition; SEAD: Selected area electron diffraction; SEI: Solid electrolyte interface; SEM: Scanning electron microscopy; TEM: Transmission electron microscopy; TMOs: Transition ...
7
Pulsed laser deposition growth of bismuth oxide superconductors
... film deposition techniques Pulsed laser deposition (PLD) technique has overcome many of the challenges involved in depositing thin films of high temperature superconductors ...
221
Investigation of nanosecond and femtosecond pulsed laser deposition and application of some metal nanoparticle films
... EXPERIMENTAL SETUP AND CHARACTERIZATION TECHNIQUES 63 3.1 Laser and vacuum system for nanosecond and femtosecond pulsed laser deposition 63 3.1.1 Nanosecond PLD setup 64 3.1.2 Femtosecon[r] ...
278
Growth of a multilayer garnet crystal double clad waveguide structure by pulsed laser deposition
... A double-clad waveguide structure has been fabricated by sequential pulsed laser deposition of YGG, Nd,Cr:GSGG, YGG and YAG on a YAG substrate. The layers, all of around 1 µm in thickness, were found ...
22
Study on Fabrication of Titanium Oxide Films by Oxygen Pressure Controlled Pulsed Laser Deposition
... catalytic activity of the film is, however, still inferior to that of the powder. In the present study, Titanium oxide films are prepared at different oxygen pressures by pulsed laser deposition (PLD) ...
5
Selective detection of naphthalene with nanostructured WO 3gas sensors prepared by pulsed laser deposition
... Pulsed laser deposition is a method for depositing a vari- ety of materials ranging from epitaxial thin films (Hussain et ...other deposition methods, for example easily controllable film ...
10
Structure and composition of layers of Ni-Co-Mn-In Heusler alloys obtained by pulsed laser deposition
... Abstract. In present work we were analysing thin layers of Ni-Co-Mn-In alloys, grown by pulsed laser deposition method (PLD) on Si, NaCl and glass substrates. For target ablation the second harmonics ...
7
Structural, Optical and Electrical Properties of Zinc Oxide Layers Produced by Pulsed Laser Deposition Method
... The structural, optical, and electrical properties of zinc oxide (ZnO) layers manufactured at different process conditions were investigated. ZnO epitaxial layers were grown on silicon, glass, and ITO/glass substrates by ...
7
Growth of nanolaminate structure of tetragonal zirconia by pulsed laser deposition
... Pulsed laser deposition (PLD) is quite easy to produce multilayer films composed of two or more materials. One of the major advantages is that the stoichiometry of the target can be retained in the ...
7
Development of a Low Cost Pulsed Laser Deposition System for Thin Films Growth
... Pulsed Laser Deposition (PLD) is a powerful technique to grow thin ...some deposition parameters is ...films deposition using up to five targets under controlled atmosphere and ...
8
Pulsed Laser Deposition of Thin Film Heterostructures
... This chapter will present the technical attributes of the pulsed laser deposition (PLD) system used for this thesis research and give a general guide for the type of equipment required for PLD. The ...
78
Characterization of Ferroelectric NaxK1 xNbO3 System Films Prepared by Pulsed Laser Deposition
... system. The lattice parameters of the NKN films were smaller than those of the targets, which might have been due to compressive stress generated during the pulsed laser deposition and/or cooling ...
6